Tender For Special Repairs To Bldg No. T-29 (Or Living) And T-22 (Or Living) At Mankot Area Under Age(I) Dalhousie.
Tender Overview
Project Description
Tender For Special Repairs To Bldg No. T-29 (Or Living) And T-22 (Or Living) At Mankot Area Under Age(I) Dalhousie.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheets any gauge thickness including Nanital or similar pattern roof covering including ridges complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified. |
| 4 | Demolition Brickwork or stone/ boulder masonry, built in cement sand mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 5 | Dismantling of wooden boarding, any description, fixed in any position with nails all as specified |
| 6 | Dismantling timber scantlings in any type of work , in any position |
| 7 | M&L for taking down chowkats or frames incl shutters (without taking off shutters from frame) n exc 1.5 Sqm complete all as specified. |
| 8 | M&L for taking down chowkats or frames incl shutters (without taking off shutters from frame) exc 1.5 sqm but n exc 4 sqm each complete all as specified. |
| 9 | Dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed. |
| 10 | Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) and removal of rubbish beyond MOD land complete all as specified and directed. |
| 11 | Dismantling of Wall and ceiling boards of any description or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 12 | 20 mm thick Boarding,Softwood 2nd class supplied & fixed with nails in any situation (except flooring and skirting) Clean sawn with lap joints |
| 13 | M & L for clean sawn second class soft-wood in scantlings |
| 14 | S&F for 6 mm thick Plywood,(5no of ply) grade BWP, type BB fixed with screws to timber frame work |
| 15 | M & L second class soft wood exc 3sqcm not exc 6sqcm Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or screws and painting two coat of synthetic enamel paint over a coat of pink primer in repair including dismantling all as specified and directed |
| 16 | M&L for Hi Steel Clip in false Ceiling System with Steel Tile 595 mm X 595 mm manufactured out of 0.50 mm thick polyester coil-coated Galvanized Steel having 180 gms zinc coating Coil-coated Steel tile shall have a 20-micron polyester-coated finish on front side and a backcoat of 5-micron alkyd primer. Two sides of each tile shall have raised, piped and stopped to ensure positive engagemant into the spring clip in profile allowing for demlition of individual tiles . The rgid susoension system consists two rows of 0.5mm galvanised steel clip in profile od size 38mm installed at 600mm centre to centre spacing to support the tiles.Wall suspesion Wall Suspension angles /Hangersof size 24 mm X 24 mm X 0.4 mm thick are fixed to the roof by expansion fasteners. Wall suspension angles to be made out coil coated Steel matching the color of the tile. They will be jointed to the clip-in-profilr system by hold on clamps. The Tiles/Planks shall be held in place by pressure clips as per manufacturer's instructions for spacing. in the flexible system the hanger and butterfly clip shall replace the suspension angle, complete all as specified. |
| 17 | M&L for 25 mm thick cement concrete type B-1 1:2:4 (20mm graded aggregate) as in sub base for flooring all as specified and directed |
| 18 | M&L for Mat finish, premium quality, coloured Non -Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc. 0.18 sqm but not exceeding 0.38 sqm each , as in floors etc. set and jointed in neat cement slurry over 15mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match,complete all as specified and directed by Engr-in Charge Size/Shade/Colour of tile shall be approved by the AGE(I). |
| 19 | M&L for Mat finish, premium quality, coloured Non -Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc. 0.18 sqm but not exceeding 0.38 sqm each , as in skirting and pointed in white or coloured cement to match neat cement slurry over 10mm screed bed or bedding layer CM 1:3 & pointed in colour cement to match complete all as specified and as directed. |
| 20 | M&L for Mat finish, premium quality, joint free (edge cut), coloured/ printed Non -Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc. 0.11 sqm but not exceeding 0.18 sqm each , as in floors etc. set and jointed in neat cement slurry over 15mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match, Size/Shade/Colour of tile shall be approved by the AGE(I). |
| 21 | M & L for fly ash bricks old size as in brick work straight or curved on plan exceeding 6m mean radious built in CM 1:6 all as specified and directed. |
| 22 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief |
| 23 | S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) & tower bolt 02 nos each shutter, making good all the disturbed surface of floor/wall to mathing the adjoining complete all as specified and directed by Engr-in Charge. |
| 24 | Sheet glass, 5.5 mm ordinary quality and glazing with glazing pin in square exc 0.5 sq. m in each pane for aluminium door windows |
| 25 | Providing and fixing Powder Coated aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment |
| 26 | S&F stainless steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 27 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat size 65x125mm one or more rebates comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). |
| 28 | Providing and fixing factory made single extruded 35mm WPC (Wood Polymer Composite) solid decorative both flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 29 | S&F IInd class hard wood glazed and skelton shutters 35mm thick, open rebated and prepared to receive glass or gauze etc (divided into squares) and fitted to chowkats, edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing glass as specified in SSR Part-I section 8.24 (a) supplied and fitted to chowkhats with edges of sash bars and framing moulded complete all as specified and directed. |
| 30 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed |
| 31 | M&L150 mm size Aluminium handle, cast type, anodised and fixed. |
| 32 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp and stape ( bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt and sliding bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 33 | S&F for 300mm, Mild steel ordinary rat rail rod pattern springs including roller and roller plate complete supply & fixed complete all as specified and directed. |
| 34 | S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 35 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 36 | M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote |
| 37 | S&F in repair 20mm bore stainless steel, single curtain rod (walls thickness not less than 1mm) including fancy type both sides brackets, fenials etc (as per sample) suitable for single curtain rod complete all as specified and directed. |
| 38 | M&L for 5mm thick both side prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site. |
| 39 | M&L for Rendering 15 mm thick in two layers (10+5) on fair facesor other than fair faces of brick work, concrete sruface,stone masonary in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed by engr-in-charge.Note: Necessary additional dubbing if required will be done by contractor and nothing extra cost is admissible in this account.all as specified and directed. |
| 40 | M&L for Rendering 15 mm thick in two layers (10+5) on other than fair faces of brick work,stone masonary surface, concrete surface in cement mortar (1:4), finished even and fair without using extra cement complete all as specified and directed by engr-in-charge.Note: Necessary additional dubbing if required will be done by contractor and nothing extra cost is admissible in this account. |
| 41 | M&L for 75 mm thick plain cement concrete 1:3:6, type C2, using 20 mm graded stone aggregate) as in plinth protection, path etc laid in alternate bays not exc 3 m in length, and finishing the surface even , complete all as specified and directed by Engr-in Charge. |
| 42 | Supply only integral water proofing compound. |
| 43 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper over a coat of 1 mm thick wall putty complete all as specified and directed. |
| 44 | M&L for preparation of newly plastered surface of wall and applying two coat of 100 % acrylic smooth emulsion exterior grade with silicon additives and anti-fengal poperties (Apex Ultima Suprema) over one coat of smartcare waterproof primer (Damp prime suprema) on walls and chajja with 10 % of dilution of water over water proof cement based putty @ 2 kg (undiluted) per Sqm of average thickness 1mm over silicon additives and sanding the surface for removal of loose particles, Tint and shed of the building as directed by Engr-in Charge. |
| 45 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment incl. screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying floor finishescomplete all as specified & directed. |
| 46 | M&L for 75 mm thick PCC type C2, 1:3:6 (40mm graded crushed stone aggregate) in Sub -base, floor and pavings etccomplete all as specified & directed. |
| 47 | M&L for PCC 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 48 | M&L cement concrete 1:3:6 type C1 (using 40mm graded crushed stone aggregate) as in surface channel and drains including necessary form work complete all as specified and directed. |
| 49 | Taking down carefully copper/aluminium point wiring (light ,fan,socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separatly) and making good disturbed surfaces of wall, floors etc. |
| 50 | M & L for point wiring in replacement with copper conductor cable multistrand, PVC unsheathed 1.5 Sqmm size FRLS for one light point controlled by one switch including one run of 1.5 Sqmm multistrand FRLS PVC unsheathed copper conductor cable for earth continuity in and including PVC casing and capping of approved size,make and quality ISI marked, including providing suitable size of copper lugs and all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading 'Point wiring' fixed on walls/ceiling including sunk cast iron boxes concealing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover including taking down carefully existing old unserviceable copper/aluminium point wiring of any type (light/fan/socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc including finishing white wash to match with existing surface all as specified and directed. |
| 51 | All as per Srl item No 50 here in before but for one 5 amps socket out let on same board. |
| 52 | All as per Srl item No 50 here in before but for one 5 amps socket out let on independent board, |
| 53 | All as per item No 50 above but for power point 3 pin switch socket 15 Amp with PVC insulated copper conductor cable multistrand unsheathed 2.5.0 Sqmm FRLS on independent board including one run of 2.5.0 Sqmm multistrand FRLS PVC sheathed copper conductor cable for earth continuity in and including PVC casing and capping of appropriate size makes and best quality ISI marked, including CI/Pressed steel sunk box and providing suitable size of copper lugs and all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading \\"Point wiring\\" fixed on wall including sunk cast iron boxes concealing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed. |
| 54 | Supply & Fixing in replacement Switch piano, flush button, single pole one way 6 amps. |
| 55 | Supply & Fixing in replacement Socket outlet 3 pin, 6 amps flush type. |
| 56 | Supply & Fixing in replacement Switch piano, flush button, 16 amps single pole one way. |
| 57 | Supply & Fixing in replacement Socket outlet 2 in 1,3 pin 5 and 16 amps flush type. |
| 58 | Supply and fix in replacement ceiling rose 65X50 mm three terminals with back plate complete all as specified and directed. |
| 59 | S & F in replacement of unserviceable tube light fitting with wall mounted LED integrated batten fitting inverter type 20 W LED T-5, 4 feet, 6500K ,PVC extruded.Including supply and fixing square Box and all accessories complete all as specified and as directed by Engr-in- charge. |
| 60 | Supply and fixing in replacement building security light 1x35 watt LED complete with tuff net glass protection IP 66, fixed to wall including with GI bracket made out of light grade 32 mm dia tubing up to 1.2 mtr lenth bend to shape with two sets of MS clamps made out of 25x3 mm flat iron with suitable nuts and bolts and testing complete all as specified and directed. |
| 61 | Supplying and fixing of 4 way ,double door surface/recess mounting ,vertical type ,415V ,TPN MCB distribution board of sheet steel,dust protected ,duly powder painted ,inclusive of 200 A tinned copper bus bar ,common neutral link,earth bar ,din bar for mounting MCBs(but without MCBs and incomer) as required. |
| 62 | Supplying and fixing 8 way , single pole and neutral ,sheet steel ,MCB distribution board ,240V ,on surface /recess,complete with tinned copper bus bar, neutral bus bar ,earth bar , din bar, interconnections,powder painted including earthing etc as required.(But without MCB/RCCB/Isolator) |
| 63 | Supply & Fixing in replacement MCB TPN 63 Amps 415 volts 10 KA complete with Fixing arrangement all as specified and as directed by Engr-in-charge. |
| 64 | Supply and fixing inreplacement MCB single pole and neutral 6 to 32 Amps, 240 volts complete all as specified and directed. |
| 65 | Supply and fixing inreplacement MCB single pole 6 to 32 Amps, 240 volts all as specified and directed by Engr-in-charge. |
| 66 | M & L for Sub main wiring in replacement with two single core FRLS, PVC insulated and unshseathed copper wire multistrand of size 4 sqmm along with 4.0 sqmm single core FRLS, PVC insulated and unseathed copper wire as earth wire connecting to common earth including providing suitable size of Copper lugs for connections of cable with MCBs or bus bars and including PVC cancealed conduit of appropriate size and best quality ISI marked complete all as specified and directed.Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit. |
| 67 | Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below ground level, connecting to galvanised iron wire 4.0mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15mm bore including provn of concrete pit in PCC (1:2:4), type B-I using 20mm graded crushed stone aggregates with 40mm thick precast cover of size 550 mm X 550 mm X 75 mm of RCC (1:2:4), type B-I, reinforced with XPM (weight not less than 4 kg/ Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion. |
| 68 | M&L and jointing testing and commisioning in replacement XLPE LT UG Cable insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 1100 Volt grade, laid in trenches / ducts / encased in GI pipe / fixed to pole/wall etc and including taking down old unserviceable cables complete all as specified and directed by Engr-in--charge. Size 4 core 10 Sqmm |
| 69 | Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in soft/loose soil, complete all as specified and directed. |
| 70 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm, complete all as specified and directed. |
| 71 | Removing excavated materials/ soils, not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed. |
| 72 | Sand cushioning to under ground cables provided with a layer of sand 8 cms thick before laying the cable and 15 cms thick after laying the cable complete all as specified and directed. |
| 73 | Sub class \\"B\\" bricks for covering to cable laid dry flat, with width equal to length of bricks all as specified and directed. |
| 74 | GI pipe light grade of size 40 mm dia laid in trenches/ walls including clamps, screws etc, complete all as specified and directed. |
| 75 | Deduct Credit Amount as per Schedule of credit as details given on Sal Page No 25 of tender doucments. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender