Tender For Inter Linking Of Ht Line From Pannikkottoor To Thamaramukku Area Under Electrical Section, Chakkittapara (Work Code : Cw-6716-202627-12)
Tender Value
8.78 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
5 days left
EMD
22000
Bank guarantee accepted
Document Fee
2124
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kozhikode → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Inter Linking Of Ht Line From Pannikkottoor To Thamaramukku Area Under Electrical Section, Chakkittapara (Work Code : Cw-6716-202627-12)
BOQ
| Sl. No. | Item Description |
| 1 | Fitting one Additional 75x40mm, 1.8mChannel cross arm in existing single poleincluding conveyance of materials. |
| 2 | Stringing of one km 3 PH 11kV linewith XLPE Insulated ACSR Raccoon orequivalant (3 conductors) after fittinginsulators, binding conductors to pininsulators using suitable tie andanchoring with wedge type anchoringclamps including cutting and removingtree branches wherever necessaryexcluding cut point works |
| 3 | Providing one Earth using GI earth pipeof size 38.1mm dia, 2.5m lengthincluding digging separate pit(0.45x0.45x2.5m) at a minimumdistance of 1.5m away from thepole/structure and maintaining standarddistance between different earth pipes inordinary soil & backfilling |
| 4 | Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns)including digging separate pit(0.45x0.45x1.5m) at standard distanceaway from the pole/structure in ordinarysoil & backfilling |
| 5 | Transporting poles by hired vehicle to adistance upto 5km and carrying upto 4numbers of poles excluding loading&unloading charges. |
| 6 | Labour charges for loading HT PSC polefrom the stacking place and unloadingthe same at work site (transportation byany vehicle) |
| 7 | Additional rate for providing one discset, PG clamp etc. complete, on any typeof HT pole for making cut point. |
| 8 | Additional rate for excavation of one Pitfor HT Pole/HT Stay in Hard Laterite. |
| 9 | Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite. |
| 10 | Dismantling (without damage) one LTPSC/RCC pole after disconnecting stays,strut etc. attached thereon and stackingthe same. |
| 11 | Transferring LT single phase 2/3 wireOH line to newly erected HT/LT poleincluding dismantling existing cross armand insulators, refitting the same on thenew pole, binding etc. complete. |
| 12 | Transferring LT three phase 4/5 wire OHline to newly erected HT/LT poleincluding dismantling existing cross armand insulators, refitting the same on thenew pole, binding etc. complete. |
| 13 | Fitting and erecting one HT PSC SinglePole in position, including fitting crossarm, digging and back filling pit inordinary soil (as per standards), drawingsufficient length of GI earthing leadsfrom F clamp through V cross arm to theground for earthing (excluding provisionof earthing) |
| 14 | Fiting One no MVT on existing crossarm including 2 nos end termination (forOne phase) of any rating for 11 kV ABCable |
| 15 | Fitting and providing one HT Stay for11kV pole, including digging and backfilling pit in ordinary soil |
| 16 | Fitting and providing one Strut using HTPSC pole including digging and backfilling pit in ordinary soil. |
| 17 | Fitting and providing one HT Fly stayfor 11kV pole using HT PSC poleincluding digging and back filling pits inordinary soil, drawing sufficient lengthof GI earth leads to the ground forearthing (excluding provision ofearthing). |
| 18 | Fitting one set AB switch on existingDP, giving connection and drawingsufficient length of GI earthing leads tothe ground for earthing, excludingprovision of earthing. |
| 19 | Drilling hole of various sizes on existingChannel/Cross Arm. |
| 20 | Fitting one Additional 2.4/3m Channelcross arm (75x40x6mm), in existing11kV DP including conveyance ofmaterials. |
| 21 | Fitting and erecting one HT Double Pole Structure using PSC pole in positionincluding fitting 2 channel cross arms,digging and back filling pit in ordinarysoil, drawing sufficient length of GIearthing leads through all cross arms tothe ground for earthing (excludingprovision of earthing). |
| 22 | Providing concrete muffing of size0.45x0. 45x1.5m (0.5m above GL and1m below GL). Excavation0.45x0.45x1m, concrete (1:3:6, 20mm)0.45x0.45x1.5m, Plastering (1:3) 12mm0.45x0.45mx5sides. |
| 23 | Disconnecting and lowering down thesingle phase WP service connection withguy wire from the OH line andreconnecting the same after completingthe line work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender