Tender For Repair/ Replacement Of Winter Appliances Including Servicing And Maintenance Of Appliances Like Geyser, Solar Water Heater And Misc Other Items At Af Stn Bhuj
Tender Value
19.99 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
19 days left
EMD
39980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Winter Appliances Including Servicing And Maintenance Of Appliances Like Geyser, Solar Water Heater And Misc Other Items At Af Stn Bhuj
BOQ
| Sl. No. | Item Description |
| 1 | Servicing of solar water heater upto 100/200 Ltrs capacity including checking serviceability of individual components and replacement of worn out fastners,gaskets,washers accessories,inspection of the entire system,cleaning of Sacrificial anode,rectification of any leaks,tightening of electric loose connections etc. and making system operational complete all as specified and directed. |
| 2 | M&L removing old broken/damaged solar water evacuated vacuum tube and supply and fix in replacement solar water evacuated vacuum tube model no. 58*1800 mm,inner tube of outer surface coated with (Al-N-Al) for excellent solar radiation and absorption high efficiency three layers tube for 100 LPD with proper airtight rubber white o ring and black o ring washer and whichever be required to make servicable of this item all as directed by Eng-in Charge. |
| 3 | Supply & Fix as in replacement of ETC based Non-pressurized and non-heat exchanger solar water heaters storage tank of size 100 LPD capacity with complete all as specified and directed by Engineer-in-charge for the following specification:- Inner tank & dish end 2 mm thick G.I. Max working Pressure: 0.5 kg/cm^2 Inner coating: Anti corrosive, heat resistant, marine epoxy coating. Outer coating: Seven tank process and pure polyester powder coating. Insulation: 50 mm, high density, machine injected, PUF insulation. Outer cladding: 0.45 mm G.I. with Seven tank process and pure polyester powder coating. Side cover: G.I. with Seven tank process and pure polyester powder coating.Tank stand: 2 mm G.I. channel with Seven tank process and pure polyester powder coating. Inner/outer socket: 1'' BSP, 4 mm thick with C-class coating and outside protection. Note:- Old unserviceable solar tank will be deposited in MES AGE E/M store yard. |
| 4 | Supply and laying of 20mm outer dia UPVC pipes SDR 11 including plain UPVC fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 5 | Supply and laying GI pipe 'medium grade' with all fittings and fixed to walls and ceiling or laid in floors of size 15 mm dia complete all as specifed and directed |
| 6 | S&F in replacement PVC tank of capacity 200 ltr (cylindrical vertical with closed top) fixed in position complete all as specified and directed. |
| 7 | Supply and fix in replacement 20mm bore float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screw for iron pipe brass ferrule (Minium weight 210 gm complete with all fittings complete all as specified and directed by Engr-In-Charge. |
| 8 | S& F in replacement of 15mm bore bib taps ISI marked cast copper alloy fancy type chroumium plated with crutch butterfly handle screw down for iron pipe or brass ferrule . |
| 9 | S& F in replacement of 15mm bore stop valve ISI marked cast copper alloy fancy type chroumium plated with crutch butterfly handle screw down for iro n pipe or brass ferrule . |
| 10 | Material and Labour for disconneting electrically and mechanically the existing geyser of any description,any capacity and make/type and in any position for repair/replacement/painting/cleaning etc including disconneting existing cold and hot water pipe connections, strip opening of geyser for descaling of tank element, thermostate,inlet/outlet water pipe connection etc using suitable chemical/wire brush,replacement of unserviceabe parts, re-assembling the same after,repair/descaling, fixing in position including, connecting inlet/outlet water pipe connection, electrical connections any testing of geyser complete all as specified and directed. |
| 11 | Supply and fix in replacement Electric heating element 30 CM length and 9 CM diameter of the following ratings at site including rubber ring washers ISI marked complete all as specified and directed.( All ISI marked) |
| 12 | (a) 2.00 KW |
| 13 | Supply and fix in replacement thermostat 40-90 degree centigrade vering capacity for the geyser of the following capacity 25/50/3 ltrs duly ISI marked Make : |
| 14 | S&F in replacement apparatus plate assy with inlet, outlet and thermostat pipes with drain plug and screws for fixing the element inclusive of clamps for holding the element with nut and bolts (Syphon assebly) suitable for following |
| 15 | 06 Ltrs |
| 16 | 25 ltrs |
| 17 | 35/50 ltrs |
| 18 | S&F in replacement for safety valve/high pressure valve ISI marked for geyser 25/50 litres capacity as per sample complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F in replacement for PVC connection with brass nipple 15 mm x 450 mm long for geyser 25/50 ltrs capacity as per sample complete all as specified and directed by Engineer in Charge. |
| 20 | S&F in replacement for indicating lamp round / flat type as required for geyser 25/50 litres capacity as per sample complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F in replacement Storage tank with glass woolen packing material, made out of SS tank (inner tank) suitable for following size of vertical geyser not less than 2mm thick suitable for following |
| 22 | 06 Ltrs |
| 23 | 25 ltrs |
| 24 | 35/50 ltrs |
| 25 | S&F in replacement Top cover /bottom cover for Geyser 25/50 Ltr Capacity,as required on site duly painted with white enamel paint all as specified and directed. |
| 26 | M&L for gas welding /brazing/soldering to the inner storage tank /apparatus plate assembly to stop the leakage including testing all as specified and directed. |
| 27 | M&L for taking down rusted rag bolts from walls and supply and fix new MS rag bolts 6\\" long 10mm dia half threaded fixed with cement complete all as directed/ specified. |
| 28 | S & F in replacement metal plug top 20 Amps 3 pin all as directed specified |
| 29 | S&F double door Sheet metal enclosures factory made DBs protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 Single pole and neutral 8 ways with 200 Amp rated bus bar 415 volts powder coated all as specified |
| 30 | All as per item No 22 above but SPN, 4 way. |
| 31 | S&F in replacement of isolators, MCBs, etc. In distribution board of the following rating and capacities |
| 32 | MCB TPN 415 volts 100 Amps Capacity, 10 KA |
| 33 | MCB TPN 415 volts 63 Amps Capacity, 10 KA |
| 34 | MCB SPN of 240 volts 20/32/40 Amps Capacity, 'C' series, 10 KA |
| 35 | MCB SP of 240 volts 6-32 Amps Capacity, 'C' series, 10 KA |
| 36 | Supply and Fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 25 W light source all including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers all as specified and directed by Engineer-in-Charge. |
| 37 | Supply and Fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded Alluminium, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per in all as directed by EIC. |
| 38 | Supply and Fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded Alluminium, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 18/20 W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as perin all as directed by EIC. |
| 39 | Pulling down the existing U/S wires of any type from concealed wiring carefully of aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete and all as directed by EIC |
| 40 | Pulling out sub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut all as directed. |
| 41 | Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING INCLUDING accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with wooden board (1st class teak wood) with laminated sheet top cover, 3mm thick complete as specified and directed for :- |
| 42 | One light point controlled by one, one way switch single pole piano type |
| 43 | One Fan point controlled by one, one way switch single pole piano type |
| 44 | One 3 pin 5 Amp socket outlet on the same board . |
| 45 | One 3 pin 5 Amps socket out let on independent board |
| 46 | One bell point controlled by one bell push on independent board. |
| 47 | All as per item No.30 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board. |
| 48 | M&L for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through and including PVC casing caping ISI marked with accessories and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed.Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit |
| 49 | All as per item No 32 but with 4 sqmm copper conductor in existing conduit |
| 50 | S&F metal clad enclosure pole and neutral with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps. |
| 51 | S&F in replacement, switch piano type, 5 Amp. SP, one way all as directed/ specified. |
| 52 | S&F in replacement switch socket outlet, 5 pin, 5 Amp, piano type all as directed/ specified. |
| 53 | S&F in replacement switch socket combination 2 in 1, 6 pin 5 and 15 Amp flush type universal all as directed/ specified. |
| 54 | S&F in replacement switch bell push, flush type, 5 Amp all as directed/ specified. |
| 55 | S&F in replacement of ceiling fan regulator electronic step type 1 to 5 steps , 2 module complete all as directed/specified of make Anchor, Legrand, Havells etc as approved. |
| 56 | S&F in replacement bell, AC, 230 V, SP, ding dong type all as directed & specified. |
| 57 | Supply & fix in replacement of LED Garden light / Post top of 25 Watt Integral pole mounted decorative LED with IP-65 protection complete fixed on existing post/New post with all assembly and electric connection with service wire all as specified and directed by Engineer-in-Charge. |
| 58 | Supply and fixing in replacement of Water heater storage type 25 Ltr, Ratted Wattage -2000 W, Voltage: -230V, AC Frequency (HZ): -50 Phase: -Single Auto cutoff, Rust Proof External Body Suitable for highrise building Suitable for water pressure head upto 8 bars Star rating (BEE): -5 . Note: Old unserviceable Water Heater will be deposited in MES store yard). |
| 59 | Supply and fixing in replacement including testing of Water Heater/Geyser of vertical type of capacity 6 Ltr, Rated 3000W,230V AC, 50Hz Auto cutoff with a High tech adjustable thermostat,multifuction saftey valve,Magnesium anode Coated heating element, Rust Proof External Body with Unique Polymer protective coated inner Tank, Red and Green indicator lamp, Suitable for highrise building Suitable for water pressure head upto 8 bars ,high Density & thick PUF that Ensures energy efficiency and reduced electricity bills ,15 Amps heavy duty plug complete all as specified and directed. Make:Note:- (I)The rate quoated shall be in including hanging of Geyser in wall with 2/4 nos of stainless steel fastner of suitable size no extra payment will be allowed to contractor in this regard. (II) Old u/s geyser to be deposited at AGE E/M store yard |
| 60 | M & L forFramed work as in Stand, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete as per required at site and dirrected by Engr in charge. |
| 61 | Labour only for for attending emergent complaints i.e no light ,earth leakage,short circuit, neutral break,mains/submain/internal circuit and Geyser related of existing system for ,making continious electric supply including carrying out minor repairs etc as required at site for making in order/functional complete all as specified and directed by Engr in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender