Tender For Repair / Maintenance Of Charpoy/Bed Hard And Chair Baramda Etc Under Ge (West) Lucknow
Tender Value
38 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
8 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Charpoy/Bed Hard And Chair Baramda Etc Under Ge (West) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | CHARPOY GI PIPE PLY TOP FD NO 220A (ITEM NO 01 TO 13) : S&F in reapir 12mm thick new ply top size 1980mm x900 mm, BWP grade 710 with 06 x Nos of GI Nuts and bolt 3\\"x6mm & 06 Nos x 1.5\\"x6mm (ISI marked) including taking out old unserviceable plywood , tightening of all charpoy complete all as specified and directed by Engr-in-Charge |
| 2 | M&L for welding of joint of old broken stiffner 40x6x870mm long with long rail of charpoy complete all as specified and directed. |
| 3 | M&L for welidng of joint of old L-type bracket with MS flat iron of size 40x6x75mm long on short and long rail of charpoy complete all as specified and directed. |
| 4 | S&F in repair new long rail of GI charpoy of size 1920mm made out of 32mm dia GI pipe medium grade including cutting and making thread both side complete all as specified and directed. |
| 5 | Fixing only short rail of GI charpoy 32mm bore medium grade, made out from long rail obtained from item No 4 above including cutting and marking tread both side including taking out old unserviceable short rail complete all as specified and directed. |
| 6 | Fixing only legs of GI charpoy 32mm bore medium grade, made out from long/short rail obtained from item No 4 & 5 above including cutting and making tread and 3mm thick round MS plate welded at bottom of each leg including taking out old unserviceable legs complete all as specified and directed. |
| 7 | S&F in reapir 32mm bore, heavy duty, 3 way GI elbow (ISI marked) having weight not less than 440 gms each complete all as specified and directed. |
| 8 | S&F in repair 32mm bore, heavy duty, GI checknut hexagonal complete all as specified and directed. |
| 9 | S&F in repair 870 mm long new stiffner made of 40x6mm thick flat iron complete all as specified and directed. |
| 10 | S& F in reapir new L-type bracket made of MS flat iron of size 40x6x75mm long and welded two frame complete all as specified and directed. |
| 11 | M&L in repair FMN Set Hook made of MS flat iron 25X5mm in each legs including welding complete all as specified and directed. |
| 12 | M&L in repair of round ruber shoes with SS washer 32 mm dia complete all as spcified and as shown on drg. |
| 13 | M&L for preparation of old steel surface (charpoy GI pipe) and applying two coats of aluminium paint with spray machine complete all as specified and directed. |
| 14 | CHARPOY WITH HARD TOP DRG No FD/MAP-II/01 (ITEM NO 14 TO 19) : S&F in repair new Ply top made of 12 MM thick BWP Grade Ply ISI:710 on charpoy with hard top complete all as specifed and as shown on drg. |
| 15 | S&F in repair long rails made with MS rectangular pipe of size 25x65mm with 18 guage welded with short rails on charpoy MS ply top complete all as specified and as shown on drg. |
| 16 | S&F in repair short rails made with MS rectangular pipe of size 25x65mm with 18 guage welded with long rails on charpoy MS ply top complete all as specified and as shown on drg. |
| 17 | S&F in repair new legs made with MS squrare pip of size 38x38mm with 18 guage welded with frame of charpoy MS ply top complete all as spceified and shown on drg. |
| 18 | S&F in repair hard rubber shoe of size and shape complete all as spceified and directed. |
| 19 | M&L for preparation of old steel surface (charpoy with hard top) with sand paper/grinder after scraping of old paint and applying two coats of synthetic enamel paint with spray gun machine and including repared/repleced of all parts complete all as per specified and as shown on drg. |
| 20 | HARD BED STEEL DRG No FD/MAP/E6/08 (R) (ITEM NO 20 TO 27) S&F in repair new ply top made of 12mm thick commercial l BWP Ply ISI:710 on hard bed steel complete all as specifed and as shown on drg |
| 21 | S&F in repair head board made of 18/19mm thick both side pre lamineted MDF Board of exterior grade ncluding 4mm thick teak wood beading alround complete all as per specified and as shown on drg. |
| 22 | S&F in repair foot board made of 18/19mm thick both side pre-lamineted MDF Board of exterior grade including 4mm thick teak wood beading alround complete all as per specified and as shown on drg. |
| 23 | S&F in repair new long rails of bed hard steel made with MS rectangular of size 25x65mm with 18 guage welded with short rails on bed hard steel complete all as per specified and as shown on drg. |
| 24 | S&F in repair new short rails of bed hard steel with made MS rectangular pipe of size 25X65 mm with 18 guage welded with long rail on bed hard steel complete all as per specified and as shown on drg. |
| 25 | S&F in repair new legs made with MS squrare pipe of size 38 x 38 mm with 18 guage welded with frame of bed hard steel complete all as spceified and shown on drg. |
| 26 | Taking out U/S hard rubber shoe and S & F rubber shoe of size and shape complete all as per specified and as shown on drg. |
| 27 | M&L for preparation of steel surface (Hard bed steel) with sand paper/grinder after scraping of old paint and applying two coats of synthetic enamel paint with spray gun machine and including repared/repleced of all parts complete all as per specified and as shown on drg. |
| 28 | CHAIR VERANDAH (ITEM NO 28 TO 33) : M&L for welding (Gas /Elect) of frame, 10mm round bar, legs where as required to make its actual shape and size complete all as per specified and as shown on drg. No FD-256 & FD/MAP/12. |
| 29 | S&F in replacement new legs made of conduit pipe 19mm dia, 1.6mm thick & 1.35 mtr (total length of each leg) and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as per specified and as shown on drg. No FD-256 & FD/MAP/12. |
| 30 | M&L for preparation of old steel surfaces (chair verandah) with sand paper and applying two coats of synthetic enamel paint complete all as per specified and as shown on drg. No FD-256 & FD/MAP/12. |
| 31 | S&F in repair new hard rubber shoe of 20 mm dia complete all as per specified and as shown on drg. FD-256 & FD/MAP/12. |
| 32 | S&F in repair new PVC Seat & back 4mm thick with weight not less than 1.85 Kg/Each and grooves 90x10 No on seat & back complete all as specified and as shown on drg. No FD- FD/MAP/12. |
| 33 | M&L for taking/cutting out old unserviceable cane from chair verandah and recanning of chair with white plastic cane (Oval shape) 2mm wide and canning border with 4mm wide cane complete all as specified and as shown on drg. No FD-256) |
| 34 | BED/COAT PLY TOP (DRG NO FD-246) (ITEM NO 34 TO 42): S&F in reapir new ply 12 mm thick (BWP) grade as per IS-710 (ISI marked) and applying french polish complete bed upto required finish complete all as per specified and as shown on drg. |
| 35 | S & F in reapir new long rail of size 1980x90x35 mm of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents complete all as specified and shown on drg. |
| 36 | All as per item No 34 above but bottom rail of size 900x60x40mm timber sal wood complete all as per specified and as shown on drg. |
| 37 | All as per item No 34 abovr but stiffner of size 900x40x40mm timber sal wood compelete all as specified and shown on drg. |
| 38 | S&F in repair head board from Bed/Bed ply wood top of size 908x450mm compelete all as specified and shown on drg. |
| 39 | All as item No 38 above but foot board size 908x375mm compelete all as specified and shown on drg.. |
| 40 | All as per item No 38 above but short rail of size 900x65x50mm compelete all as specified and shown on drg.. |
| 41 | M&L in repair of konia (wooden bracket) of size 3\\"x3\\" of 1st class seasoned teak wood, 1\\" thick in between leg and short/long rail of table fixed with screw compelete all as specified and shown on drg. |
| 42 | M&L for preparation of old wooden surfaces (Bed/Coat ply top) and applying french polish complete upto required finish compelete all as specified and shown on drg. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender