Tender For Providing Speed Breaker And Painting Of Existing Speed Breaker On The Road From B. C. Roy Hospital To City Centre Under Haldia Municipality.
Tender Value
3.63 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
12 days left
EMD
8000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur East → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Speed Breaker And Painting Of Existing Speed Breaker On The Road From B. C. Roy Hospital To City Centre Under Haldia Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Rumble StripsProvision of 3 No.s rumble strips covered with premix bituminous carpet, 15-20 mm high at center, 250 mm wide placed at 1 m center to center at approved locations to control speed, marked with white strips of road marking paint.Tack coatProviding and applying tack coat with paving bitumen of VG-10 grade conforming to IS:73 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503)i)On bituminous surface @ 0.20kg 0.3kg /sqm.Ref: Page-111, Sl no.2, B, i -HN sch 2019-2020. |
| 2 | Bituminous Macadam.Providing and laying bituminous macadam with 100-120 TPH hot mix plant using crushed aggregates of specified grading premixed with approved bituminous [email protected]% (min) forGrading-and 3.4% (min) for Grading-2 by weight of total mix, transported to site, laid over a previously prepared base with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504). ii) for Grading II (19mmnominal maximum aggregate size) Layer Thickness 50-75mmRef: Page-112, Sl no.3, ii-HN sch 2019-2020.Ref: Derived rate |
| 3 | Open - Graded Premix Surfacing Providing, laying and rolling of open-gradedp remix surfacing of 20mm thickness composed of 13.2 mm to 5.6mm aggregates either using viscosity grade bitumen of approved grade to required line, gradeand level toserveaswearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandemor other approved type roller 8-10 tonne capacity, finished to requiredlevel andgrades (ReferencetoMORT&H's specification clause 510). Mechanical method using approved grade Bitumen and HMP of appropriate capacity not less than 75 tonnes/hour.Ref: Page-119, Sl no.10(i) -HN sch 2019-2020. |
| 4 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type B seal coats (Reference to MORT&H's specification clause 511)Providing and laying of premix sand seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade.Ref: Page-121, Sl no.12,ii -HN sch 2019-2020. |
| 5 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface.Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per Clause 803 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).Page : 146 Item No: 13 PWD NH SOR |
| 6 | 18% GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender