Tender For special Repair To Toilet Block Of Bldg No P1, P2, P3, P4, P6, P7, P8 Including Allied Wks At Lailapur Military Garrison At Cijw School Vairengte
Tender Value
47.40 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
20 days left
EMD
94800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolasib → Mizoram
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Toilet Block Of Bldg No P1, P2, P3, P4, P6, P7, P8 Including Allied Wks At Lailapur Military Garrison At Cijw School Vairengte
BOQ
| Sl. No. | Item Description |
| 1 | B & R Division Items |
| 2 | Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed. |
| 3 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demoletion) of any description and in any position complete all as specified and directed. |
| 4 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed. |
| 5 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off the premises. |
| 6 | Demolition and breaking up drain pipe 150mm internal dia (Salt Glazed stoneware, AC, RCC pipe including hunching and bed concrete complete all as specified and directed. |
| 7 | Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key scrubing down with water etc complete all as specified and as directed. |
| 8 | Taking down chowkhats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm each complete all as specified. |
| 9 | Taking down Chowkhats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frame) complete all as specified. |
| 10 | Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 11 | Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 12 | Excavating in trenches, n exc 1.50 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/ loose type of soil complete all as specified and directed. |
| 13 | Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm all as specified. |
| 14 | Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point all as specified. |
| 15 | M&L for PCC (1:4:8), Type D2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete complete all as specified. |
| 16 | M & L for Plain Cement Concrete (1:3:6) type C1 using 20mm graded stone aggregate as in surface channel and drain all as specified and directed. |
| 17 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends for etc complete all as specified and directed. |
| 18 | M & L for 75mm thick cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in sub base, floorings, pavings and similar work complete all as specified and directed. |
| 19 | M & L for 75mm thick cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection finished even and fair without using extra cement laid in panels and joints filled with bituminous mastic filling with 1 part of bitumen and 3 part of sand complete all as specified and directed. |
| 20 | M & L for forming joint 30mm deep X 10mm wide filled with sealing compound grade 'A' complete all as specified and directed. |
| 21 | M & L for Precast reinforcement cement concrete (1:2:4) type B1 using 20mm graded aggreagate as in cover slab for man holes, chullah hoods, chajja, water troughts, mangers, shelves and similar article with plain faces set in cement mortar (1:4) incl necessary formwork complete all as specified and directed. |
| 22 | M & L for Mild Steel TMT Bar 10mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 23 | M & L for brickwork with subclass 'B' straight or curved on plan exc 6 m mean raduis, built in CM (1:6) complete all as specified and directed. |
| 24 | M&L for rendering 10 mm thick in cement mortar (1:3) on ceiling finished fair and even without using extra cement complete all as specified.Note :- WPC measured and paid saperately. |
| 25 | M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified. |
| 26 | M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified. |
| 27 | M & L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick wall or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified. |
| 28 | M & L Non Skid ceramic tiles coloured joint free 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match for laying floor finish over including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for tile over brushing with neat cement slurry as specified |
| 29 | M & L Glazed ceramic coloured tiles in vertical surface size 450mm x 300mm x & ( 6mm to 7mm )mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick screed bed or backing coat in cement mortar 1:4 laying of skirting/dado on walls all as specified and directed. |
| 30 | M&L for 18-20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win-dow-cills, cooking platforms and like in cement mortar (1:4) including point-ing in white cement (1:2) us-ing marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 31 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 32 | M&L pre-polished chequered coloured paver tiles 300mmX300mmX 22mm thick, in floors, set, jointed & pointed with neat white cement slurry mixed with pigment to match colour of tile, laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed. |
| 33 | S & F Solid PVC door frame of size 50mm X 47mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube , supplying & fixing in opening as per specification & drawing complete all as specified . |
| 34 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & Fing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved. |
| 35 | S & F 2 track way sliding anodized aluminium glazed ventilator shutter with frame consists of following specification all as specified & directed.(a) Ventilator frame 2 track of size 60mm × 25mm × 1.5mm thick.(b) Stiles and rails of size 35mm × 25mm × 1.5mm.(c) 35mm × 35mm × 1.5mm T section mullion.(d) PVC gasket with 4mm thick tinted glass, incl. aluminium handles with necessary locking arrangement.Note: Measurement to be taken as overall width and height of ventilator. No shutter or frame to be measured separately. All necessary accessories including tinted glass required for assembling and fixing window at proper place complete are deemed to be inclusive. |
| 36 | S&F 100mm long MS Butt hinges, medium weight, cold rolled complete all as specified. |
| 37 | S & F 125 mm long extruded aluminium alloy handles fabricated type anodised complete all as specified & directed . |
| 38 | S & F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 39 | S & F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified. |
| 40 | S & F in repair, vitreous china Squatting pan, 'Orissa' pattern, Size 580mm X 440mm ,with integral foot rests (excluding flushing ciestern and flush pipe) incl necessary cement concrete bedding and 100 mm bore cast iron 'P' trap with 550 to 600mm long neck for connecting WC to branch piece with cement joints complete all as specified & as directed . |
| 41 | S & F vitreous china couter top over shape wash hand basin of, size 536mm X 435mm including fixing with cement mortar 1: 3 with waist coupling complete all as specified and directed. |
| 42 | S & F in repair, PVC valveless, syphonic action type, low level flushing cistren 10 ltr capacity ISI Marked incl all acessories and 32mm dia PVC flush / discharge pipe incl float valve, inlet complete all as specified. |
| 43 | S & F in repair, PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified. |
| 44 | S&F in repairs, Brass chromium plated bottle trap for wash hand basin, urinal with inlet and outlet screwed for pipe or connection including necessary packing union and cap and fixed complete all as specified and directed. |
| 45 | S & F in repair, 15mm bore pillar tap cast copper alloy with capstan head, fancy type, chromium plated concealed screwed down high pressure with or without hot or cold with long shunk screwed shanks and fly nuts screwed for iron pipes and connecting to water pipe line complete all specified and directed. |
| 46 | S&F in repairs 15mm chromium plated bib tap long body with flange fancy type fixed in 15mm bore of Each 5 pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 47 | S & F in repair, 15mm bore angle stop valve, cast copper alloy cromium plated fancy type screwed down high pressure, with crutch or butterfly handle for 15 mm bore pipe or for unions complete all specified and directed. |
| 48 | S & F as in repair, 15mm bore stop valves/angle valve of cast copper alloy, fancy type, concealed, cup screwed down, high pressure with crutch or butter fly handle, chromium plated, with long shank fixed complete all as specified. |
| 49 | S & F in repair, Towel rail, 20mm dia Brass chromium plated, 600mm long 'D' type with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs complete all as specified. |
| 50 | S&F in repair Brass CP shower rose of size 100mm/125mm with arm including fixing to Each steel pipes complete all as specified and directed. |
| 51 | S& F in repairs grating doom 125 mm dia with waste hole of PTMT (Mirimum weight 40 gms) complete all as specified and directed. |
| 52 | S & F in repair 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 9mm thick AC building board or commercial plywood and PVC moulding frame fancy type complete all as specified and directed. |
| 53 | Cutting into existing manholes for connection new drain of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified. |
| 54 | M&L for PCC (1:3:6),Type C2 using 40 mm graded stone aggregate as in bed to drain for 150 mm bore including packing under and hunching against side of pipe after they are laid and tested complete all as specified. |
| 55 | S & F 150mm bore PVC (SWR) pipes single socketed with rubber joint, in any length, with rubber ring joints, for eves gutter complete all as specified. |
| 56 | S & F in repair 110mm bore PVC (SWR) pipes single socketed with rubber joint, in any length, with rubber ring joints, laid in trenches or in floors complete all as specified. |
| 57 | S & F in repair 75mm bore PVC (SWR) pipes single socketed with rubber joint, in any length fixed to walls / floors or in trenches complete all as specified. |
| 58 | S & F in repairs PVC (SWR) bend any radius, of 75mm bore with access door complete all as specified. |
| 59 | S & F in repair 100mm bore PVC junction, double T equal or unequal complete all as specified. |
| 60 | S & F in repair 75mm bore PVC junction, double T equal or unequal complete all as specified. |
| 61 | Supply & Fixed in repairs PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified. |
| 62 | Supply & Fixed in repair 110mm dia PVC (SWR) 'S' trap suitable for pipe complete all as specified. |
| 63 | Supply & Fixed in repair 110mm dia PVC (SWR) WC connector bend type with access door complete all as specified. |
| 64 | Cutting grooves chases for concealed water tubing or concealed conduct and making good cutting not exc 10cm in girth in brick wall complete all as specified and directed. |
| 65 | S&F 15mm bore steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including S & Fing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed. |
| 66 | S&F 20mm bore steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including S & Fing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed. |
| 67 | S & F in repair 15 mm bore Gun-metal, gate valves, with iron wheel head, screwed both ends on GI pipes with GI union fixed in existing/ new location complete all as specified and directed. |
| 68 | S & F as in repair 20 mm bore Gun-metal, gate valves, with iron wheel head, screwed both ends on GI pipes with GI union fixed in existing/ new location complete all as specified and directed. Please Enable Macros to View BoQ information |
| 69 | S & F as in repair 20 mm bore Gun-metal, gate valves, with iron wheel head, screwed both ends on GI pipes with GI union fixed in existing/ new location complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender