Tender For Repair / Maintenance Of Drain, Footpath And Boundary Wall In Zone B Area Of Age B/R-I Under Ge (West) Lucknow
Tender Value
49 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
12 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Drain, Footpath And Boundary Wall In Zone B Area Of Age B/R-I Under Ge (West) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4 ) in patches finished even and smooth without using extra cement incl taking down existing cement plaster complete all as specified and directed. |
| 2 | M&L for RCC 1:1.5:3, type A-1 (using 20 mm graded stone aggregate), precast cover Slabs and the like etc incl demolition of existing RCC complete all as specified and directed |
| 3 | M&L for MS TMT bars upto 10mm dia, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 4 | M&L for Brick work with subclass‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 incl demolition of existisng brick work complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick on fair faces of brick work/ concrete surfaces in cement mortar 1:4 finished even and smooth on wall without using extra cement complete all as specified and directed. |
| 6 | M&L for mild steel frame brackets of angle cut to shape including welding , bending, embeding in concrete and screwing etc. including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 and incl dismantling old wrought iron work complete all as specified and directed. |
| 7 | M&L for preparation of newly plastered wall surface and applying two coats of cement base paint over a coat of alkali-resistant priming paint complete all as specified and directed. |
| 8 | M&L in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 9 | S&F for framed work such as gates, grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar workconforming to Fe-290 Gde E-165 incl dismantling of exisgting wrought iron or mild steel work complete all as specified and directed. |
| 10 | M&L for preparation of new or previously untreated surfaces of steel & iron work of any description exc 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 11 | M&L for preparation of old steel surfaces of any description exc 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 12 | Demolition of cement concrete and paving n exc 15 cm thick in floors, and similar work complete all as specified and directed. |
| 13 | M&L for 75mm PCC 1:4:8: type D2 (using 40 mm graded aggregate) in sub base complete all as specified and directed. |
| 14 | M&L for chequered cement concrete tiles coloured glossy finish rubber moulding with mixture of white cement and pigments of size 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry in fooors incl 20 mm thick screed bed in CM 1:6 incl demolition of existing tiles etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 15 | M&L for chequered cement concrete tiles coloured glossy finish rubber moulding with mixture of white cement and pigments of size 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry in fooors incl 20 mm thick screed bed in CM 1:6 incl demolition of existing tiles etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender