Tender For Repair/Replacement Summer Appliances Like Ceiling Fan, Wall Mounted Fans, Pedestal Fans, Exhaust Fans And Certain Allied Works In Domestic And Technical Area At Af Stn Bhuj
Tender Value
30 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
6 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Summer Appliances Like Ceiling Fan, Wall Mounted Fans, Pedestal Fans, Exhaust Fans And Certain Allied Works In Domestic And Technical Area At Af Stn Bhuj
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Ceiling Fan and Servicing of 1200/1400MM by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes and refixing after repair to unserviceable part complete all as directed by Engineer-in-Charge. |
| 2 | M & L for taking out & removing old burnt-out windings of electric fans of any description and rewinding of fan motor with appropriate size super enameled copper wire as approved by Eng-in-charge including insulating material such as illuminous paper,Letherized paper,cotton tape,glass sleeving,insulating varnish etc.and transportation to site after testing at workshop,connecting and testing on full load ,hanging/fixing the repaired fans in same position or at position as directed by engr-in-charge. as directed for the following fans:-(a) Rewinding of motor of ceiling fans 1200/1400 mm sweep complete all as specified and directed By Engr-in -Charge. |
| 3 | All as per item No 02 here-in-before but rewinding of motor of exhaust fans of 300/450 mm Sweep |
| 4 | All as per item No.02 here-in-before but rewinding of motor of Wall Mounted Fans of /450/600 mm Sweep |
| 5 | All as per item No.02 here-in-before but rewinding of flame proof exhaust Fans of 380/450 mm Sweep |
| 6 | S&F in replacement ball bearing suitable for ceiling fan/exhaust fan/wall mounte fan/pedestal fan all as specified and directed By Engr-in -Charge. |
| 7 | S&F in replacement Gun Metal bushes suitable for ceiling fan/exhaust fan/wall mounte fan/pedestal fan etc as approved all as specified and directed By Engr-in -Charge. |
| 8 | S&F in replacement Rotor shaft suitable for ceiling fan all as specified and directed By Engr-in -Charge. |
| 9 | S&F in replacement capacitor 2.5 mfd 250 volts AC all as specified and directed By Engr-in -Charge. |
| 10 | S&F in replacement only rubber reel, bolt & nut, including cotter pin etc, complete all as specified and directed By Engr-in -Charge. |
| 11 | S&F in replacement Flexible wire 23/.0076 twin core copper conductor all as specified and directed By Engr-in -Charge. |
| 12 | M & L for fabrication of fan hook made out of MS strip 32x6mm duly welded with 12mm dia MS rod and fan Hook bend to shape 'S' after taking out old one all as specified and directed By Engr-in -Charge. |
| 13 | Supply and Fix in replacement ceiling fan down rod of length 300/450 mm, inner diameter 15mm and thickness not less than 1.5mm with clamps Nuts, Bolts and washers for existing ceiling fan as approved by Engr-in-Charge |
| 14 | Supply and Fix in replacement ceiling fan down rod of length 600 mm, inner diameter 15mm and thickness not less than 1.5mm with clamps Nuts, Bolts and washers for existing ceiling fan as approved by Engr-in-Charge |
| 15 | S&F alluminium fan blades white colour suitable for 1200mm sweep ceiling fan with suitable nuts and bolts all as specified and directed by Engr-in-Charge |
| 16 | M&L for complete painting of ceiling fan of any make and sweep with two coats synthetic enameled paint(spray paining) of existing colour or ordered colour on one coat of red oxide primer after scratching and making/prepration of clean and smooth surfaces by applying putty all as specified and as directed by Engr-in-Charge. |
| 17 | All as per item No 16 here-in-before but painting of exhaust fans of 300/450 mm Sweep |
| 18 | Supply and Fix in replacement of metal body exhaust fan, AC single phase 230/240V of size 250 mm sweep with louvers and suitable size of wire mash for covering hole including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan and making surface good as existing/ matching all as directed by Engineer-in-Charge. Note: 1. Old unserviceable fan will be diposited in MES store yard. 2.Material and labour for wooden panel/ frame for fixing exhaust fan when alteration of hole size required include in quated rates). |
| 19 | All as per item No 18 here-in-before but metal exhaust fan of size 300 mm Sweep |
| 20 | All as per item No 18 here-in-before but heavy duty metal exhaust fan of size 380 mm Sweep |
| 21 | All as per item No 18 here-in-before but heavy duty metal exhaust fan of size 450 mm Sweep |
| 22 | Supply and Fix Wall mounted fan 450 mm sweep ,240 volts osillation type sturdy & heavy duty with alluminium blade for higher air delivery , nickel chrom plated guard,smooth osillation complete fix on exisiting wall all as directed by Engineer-in-Charge. Note: Old unserviceable fan will be diposited in MES store yard). |
| 23 | Supply and Fix in replacement of PVC body exhaust fan AC single phase 230/240V of size 300 mm sweep with louvers and suitable size of wire mash for covering wall including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan all as directed by Engineer-in-Charge. Note: Old unserviceable Exhaust Fan will be deposited in MES AGE E/M store yard. 2.Material and labour for wooden panel/ frame for fixing exhaust fan when alteration of hole size required include in quated rates). |
| 24 | Supply and Fix in replacement of PVC body exhaust fan AC single phase 230/240V of size 250 mm sweep with louvers and suitable size of wire mash for covering wall including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan all as directed by Engineer-in-Charge. Note: Old unserviceable Exhaust Fan will be deposited in MES AGE E/M store yard. 2.Material and labour for wooden panel/ frame for fixing exhaust fan when alteration of hole size required include in quated rates. |
| 25 | Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and ccessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) . Note: Old unserviceable fan will be diposited in MES store yard. |
| 26 | Supply and Fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 25 W light source all as per Eng-in-Charge including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers all as specified and directed by Engineer-in-Charge. |
| 27 | Supply and Fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded Alluminium, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per all as directed by EIC. |
| 28 | Supply and Fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded Alluminium, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 18/20 W 4 ft indoor decorative with 2 Core copper wire freom ceiling rose to light fitting as per all as directed by EIC. |
| 29 | Labour only for attending emergent day to day complaints i.e no light ,earth leakage, short circuit, neutral break, mains/submain/internal circuit of existing system of main building/block,making continious electric supply including carrying out minor repairs etc as required to make the system in order/functional including replacing fuse wire,copper cable,copper thimbles,glands,earthing wire complete all as specified and directed.Note:- 1.Rate of Fuse wire,copper cable of size 1.5,2.5,4 Sqmm upto 3 RM,copper thimbles,glands,earthing wire are deemed to be considered in this item. |
| 30 | Pulling down the existing U/S wires of any type from concealed wiring carefully of aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete and all as directed by EIC |
| 31 | Pulling out sub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut all as directed. |
| 32 | Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING INCLUDING accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with wooden board (1st class teak wood) with laminated sheet top cover, 3mm thick complete as specified and directed for :- |
| 33 | One light point controlled by one way switch |
| 34 | One Fan point controlled by one way switch |
| 35 | One 3 pin 5 Amp socket outlet on the same board . |
| 36 | One 3 pin 5 Amps socket out let on independent board |
| 37 | One bell point controlled by one bell push on independent board. |
| 38 | All as per item No.32 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board. |
| 39 | S&F modular white cover plate with frame of module 2 flush ISI marked all as specified and directed. |
| 40 | S&F modular white cover plate with frame of module 3 flush ISI markedall as specified and directed. |
| 41 | S&F modular white cover plate with frame of module 6 flush ISI marked all as specified and directed. |
| 42 | S&F modular white cover plate with frame 8 module ISI marked all as specified and directed. |
| 43 | S&F modular blank plate module 1 all as specified and directed. |
| 44 | M&L for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through and including PVC casing caping ISI marked with accessories and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed.Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit |
| 45 | All as per item No 39 but with 4 sqmm copper conductor in existing conduit |
| 46 | S&F in replacement, switch piano type, 5 Amp. SP, one way all as directed/ specified. |
| 47 | S&F in replacement switch socket combination with box, 2 in 1, 5 Amp, flush type all as directed/ specified. |
| 48 | S&F in replacement switch socket combination with box, 2 in 1, 5/16A 5 in 1 Amp flush type universal all as directed/ specified. |
| 49 | S&F in replacement switch bell push, flush type, 5 Amp all as directed/ specified. |
| 50 | S&F in replacement, modular switch flush type, 6 Amp. SP, one way ,1 module all as directed/ specified. |
| 51 | S&F in replacement modular swicth, 16 Amp flush type 1 module all as directed/ specified. |
| 52 | S&F in replacement modular socket outlet, 3 pin, 6 Amp, flush type 2 module all as directed/ specified. |
| 53 | S&F in replacement modular socket outlet, 3 pin, 6/16 Amp flush type 2 module all as directed/ specified. |
| 54 | S&F in replacement modular bell push, flush type, 6 Amp,1 module all as directed/ specified. |
| 55 | S&F in replacement bell, AC, 230 V, SP, ding dong type all as directed & specified. Make Anchor/leader |
| 56 | S&F in replacement stepped type electronic fan Regulator flush type on the existing phenolic laminated etc as reqd single pole 240 volts grade 350 watts heavy duty ISI marked. |
| 57 | S&F in replacement of ceiling fan regulator 120 Watt 2 module Modular Type electronic step type 5 step 360 deg all as specified and directed by Engineer-in-Charge. |
| 58 | S&F in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed. |
| 59 | S&F in replacement of Ceiling rose 3 phase, PVC/ Polycarbonate body all as directed/ specified. |
| 60 | S&F in Replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coated all as specified |
| 61 | All as per item No. 55 above but SPN 8 way with 200 Amp rated Busbar. |
| 62 | All as per item No 55 above but SPN, 4 way. |
| 63 | S&F in replacement of isolators, MCBs, etc. In distribution board of the following rating and capacities |
| 64 | MCB TPN 415 volts 63 Amps Capacity, 10 KA |
| 65 | MCB TPN 415 volts 100 Amps Capacity, 10 KA |
| 66 | MCB SPN of 240 volts 20/32/40 Amps Capacity, 'C' series, 10 KA |
| 67 | MCB SP of 240 volts 5-40 Amps Capacity, 'C' series, 10 KA |
| 68 | S&F in Replacement metal clad enclosure pole and neutral with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender