Defence Statutory Bodies & Commissions/Committees Closing in 12 days TDR #58099868

Tender For Repair/Replacement Of Path, Hardstanding, Drain And Fencing Work In Smq Under Ge (Af) Adm Area At Af Station Gwalior

Issued by Statutory Bodies & Commissions/Committees · Gwalior, Madhya Pradesh
Tender Value
35 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
12 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair/Replacement Of Path, Hardstanding, Drain And Fencing Work In Smq Under Ge (Af) Adm Area At Af Station Gwalior

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 21-Oct-2026 8616/E8 Other 07-Nov-2026

BOQ

Name of Work:- REPAIR/REPLACEMENT OF PATH, HARDSTANDING, DRAIN AND FENCING WORK IN SMQ UNDER GE (AF) ADM AREA AT AF STATION GWALIOR
Sl. No. Item Description
1Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level, complete all as specified and as directed.
2M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling,mass concrete etc complete all as specified and as directed.
3M & L for Sand filling under floors or in foundations including watering and consolidation Etc complete all as specified and as directed.
4M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment laid in floor and joints of interlocking tiles/ paver block to be filled with fine sand and broomed etc complete all as specified and as directed.
5Dismantling Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed.
6S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
7S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
8Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.
9Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n. exc 50 m and making good surface in hard/dense soil complete all as specified and as directed.
10M&L Cement concrete type B1 1:2:4 (20mm graded aggregate ) as in foundation for Posts and Struts complete all as specified and as directed.
11S&F Steel work in tubular trusses including special shapedwasher etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed.
12Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as specified and directed.
13S&F,mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
14Dismantling fencing wire mesh/ barbed wire ,any type complete all as specified and as directed.
15M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth complete all as specified and directed
16Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia of bolt etc, complete all as specified and as directed.
17Supply only galvanised chain link fencing of size 100 x 100 mm aperture and dia of 4.00 mm any size or type complete all as specified and as directed. Note:- Weight of chain link fencing shall be ascertained through BOO.
18Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed
19M&L for removing chain link fencing and refixing the same by tightening after necessary repairs by changing the damaged posts/flat iron and by using required nuts and bolts ,any type,complete all as specified and directed. Note :- The posts/Flat Iron/Nuts and bolts to be paid saperately.
20Dismantling existing sunken interlocking pavers block of any description, size and pattern and refixing the same in any location for proper matching with existing surface after carrying out the necessary repair to the under layer complete all as specified and as directed. Note: Sand cushioning and sub base concrete will be measured separetely
21Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and as directed.
22M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.
23All as per item No.22 but except bricks.
24Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed.
25M&L, rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface and finishing surface even and smooth without using extra cement complete all as specified and directed.
26M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching ,kerbs, bed blocks and like etc complete all as specified and directed.
27M&L cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels, bed of drains including forms/moulds etc. complete all as specified and directed.
28Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, initred/stopped ends complete all as specified and directed.
29Demolition of reinforced cement concrete in ground floors etc not exceeding 15cm thickness as drain cover and similar works complete all as specified and directed.
30M&L for precast reinforced concrete 1:2:4 type B1 using 20 mm graded stone aggregate for drain cover slab set in and pointed in CM 1:6 including necessary formwork complete all as specified and directed.
31S&F TMT bars 6 to 8 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
32Cleaning of existing drain of any size or shape by removing sludge /silt/ earth (liquid, semisolid & solid) completely and removing the rubbish to a distance exc 250 m but not exc 500 m and deposited where directed, complete all as specified and directed.
33M&L one coat of synthetic enamel paint over old painted steel surfaces of any description over 10 cm width or girth including preparation of old surfaces complete all as specified and directed.
34M&L for prepration of old decorated Brick tile /Concrete tiles (Chequered / interlocking tiles) cleaning by any means, and applying one coat of floor tile paint any colour with spray gun/compressor complete all as specified and directed. Make: INDIGO Floor Paints or Apex Floor Guard of Asian Paints/Techno Commercial or equivalent
35M&L for Preparing old decorated plastered or unplastered surfaces of extemal walls and applying one coats exterior weather proof Paint by the use of rollers complete all as specified and directed. Make: APEX of M/s Asian Paints or equivalent in M/s Berger as approved by GE.
36M&L for Removing excess berms by excavating in any type of soil, including getting out, loading, transporting and disposing of surplus excavated material to the authorized dumping area at a lead not exceeding 1.5KM, including dressing the finished surface, complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58099868
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 35 Lakhs
LAST DATE 07-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Replacement Of Path, Hardstanding, Drain And Fencing Work In Smq Under Ge (Af) Adm Area At Af Station Gwalior
Basic Detail
Tender No 8616/E8
Bidding Type Tender
Location
City Gwalior
State Madhya Pradesh
Key Dates
Publish Date 21 Oct 2026
Submission Date 07 Nov 2026
Open Date 01 Jan 0001
Finance
Tender Value 35 Lakhs
Tender Fee 500
EMD 70000
Exemption Available
Document List
BOQ_891147.xls
cf7bf9ad-996c-4cd6-88fa-4dee414311f1.html
Tender8616.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 07, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 12 days
Nov 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_891147.xls

html

cf7bf9ad-996c-4cd6-88fa-4dee414311f1.html

pdf

Tender8616.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender