Tender For Camouflage Painting To Perimeter Wall And Allied Security Infrastructure In Tech Area At Af Stn Ad Ur
Tender Value
45 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
3 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Camouflage Painting To Perimeter Wall And Allied Security Infrastructure In Tech Area At Af Stn Ad Ur
BOQ
| Sl. No. | Item Description |
| 1 | M&L for exterior acrylic emulsion on Perimeter wall surfaces in disruptive / camouflaging pattern of six / four shades comporising the following activities complete all as specified and directed by Engr-in-Charge:- (i) Preparation of old wall surfaces for height not exceeding 12.00 Mtr.(ii) Applying two coats of water based exterior acrylic emulsion as in base coat over a coat .(iii) Applying two coats of exterior acrylic emulsion in disruptive / camouflaging pattern of six / four shades in tatoos only (Camouflage pattern shall be approved by Stn Auth). |
| 2 | M&L for exterior acrylic emulsion on old wall surfaces in disruptive / camouflaging pattern of six / four shades comporising the following activities complete all as specified and directed by Engr-in-Charge:- (i) Preparation of old wall surfaces for height not exceeding 12.00 Mtr.(ii) Applying one coats of water based exterior acrylic emulsion as in base coat over a coat of primer.(iii) Applying one coat of exterior acrylic emulsion in disruptive / camouflaging pattern of six / four shades in tatoos only (Camouflage pattern shall be approved by Stn Auth). |
| 3 | M&L for exterior acrylic emulsion on PQC surfaces in disruptive / camouflaging pattern of six / four shades comporising the following activities complete all as specified and directed by Engr-in-Charge:- (i) Preparation of old PQC surfaces by mechanised sander having RPM of minimum 1200 having vaccum bag. (ii) Applying two coats of water based exterior acrylic emulsion as in base coat .(iii) Applying two coats of exterior acrylic emulsion in disruptive / camouflaging pattern of six / four shades in Tattoos only. (Camouflage pattern shall be approved by Stn Auth). |
| 4 | M&L for exterior acrylic emulsion on PQC surfaces in disruptive / camouflaging pattern of six / four shades comporising the following activities complete all as specified and directed by Engr-in-Charge:- (i) Preparation of old PQC surfaces by mechanised sander having RPM of minimum 1200 having vaccum bag. (ii) Applying one coat of water based exterior acrylic emulsion as in base coat over a coat of primer.(iii) Applying one coat of exterior acrylic emulsion in disruptive / camouflaging pattern of six / four shades in Tattoos only. (Camouflage pattern shall be approved by Stn Auth). |
| 5 | M&L Two coats of synthetic enamel paint over old steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, over a coat of red oxide primer including removal / preparation of old surfaces and disruptive/camouflaging pattern of six / four shades (in tatoos only) over coat of base paint on the entire old steel surface, for height not exceeding 12.00 8.50 metre complete all as specified.(Camouflage pattern shall be approved by Stn Auth). |
| 6 | NOTES APPLICABLE TO SRL ITEM 1 TO 5 HERE-IN-ABOVE: (i) Exterior acrylic emulsion & primer shall be applied only through approved applicators, authorised by the manufacturers for such works.(ii) Entire quantity of material for this work shall be procured by the contractor from manufacturer's Depot & deposit the same with Enginer-in-Charge and same shall be issued to contractor on daily basis as per consumption at site. (iii) RGB value of four shades of disruptive/camouflaging pattern shall be all as shown on Drg No. GE/SK-1/19 sheet 1/2 & 2/2.(iv) The rate quoted by the contractor shall included for scaffolding and necessary formwork.(v) Preparation of surfaces shall be done with mechanised sander having suction vaccum bag using smart periodical methodology includig removal of vegetation growth, bushes and the like to the entire satisfaction of Engineer in Charge.(vi) Site will be handed over to contractor as and when the site will be handed over to MES by the users and no compensation would be admissible to contractor in this regard. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender