Tender For Construction Of Smart Fencing With Solid Rcc/ Steel/ Iron Pillar At Kuklung Manas Resort Under Borobazar Td Block In Chirang District Under Tourism Department (Sopd) For The Year 2026-27.
Tender Value
1.20 Crore
Estimated cost
Bid Submission
07 Nov 2026
12 days left
EMD
2.40 Lakhs
Bank guarantee accepted
Document Fee
3600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chirang → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Smart Fencing With Solid Rcc/ Steel/ Iron Pillar At Kuklung Manas Resort Under Borobazar Td Block In Chirang District Under Tourism Department (Sopd) For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. 2.8.1 All kinds of soil |
| 2 | Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including fitting the joints with same mortar, with common burnt clay non modular bricks: 11.1.1. 1:4 (1 cement: 4 coarse sand) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level. 4.1.3:- 1:2:4 (1cement: 2 coarse sand (zone-III): 4 graded stone aggregate 20mm nominal size) |
| 4 | Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo- Mechanically treated bars of grade Fe-500D or more. |
| 5 | Steel reinforcement for R.C.C. work including straithtening, cutting, bending, placing in position and binding all complete above plinth level. 5.22 A.6 Thermo-mechanically treated bars of grade Fe-500D or more. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.1:- Foundations, footings, bases of columns, etc. for mass concrete. |
| 7 | 5.9.5:- Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 8 | 5.9.6:- Columns, pillars, piers, abutments, posts and struts. |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level. 5.1.2. 1:1.5:3 (1cement: 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources). |
| 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement. 5.2.2:- 1:1.5:3 (1cement: 1.5 corase sane (zone-III): 3 graded stone aggregate 20mm nominal size. |
| 11 | 15mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 13.8.1: 1:3 (1cement: 3 fine sand) |
| 12 | Applying on coat of water thinnable cement primer of approved brand and manufacture on wall surface: 13.43.1 Water thinnable cement primer |
| 13 | Finishing walls with water proofing cement paint of required shade 13.44.1: New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 14 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x 50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-Charge. 16.70.1 Made of G.I. wire of dia 4mm |
| 15 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as directed. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 16 | Display Board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender