Tender For Construction of Main Storage Tank In Village Mehlog Tehsil Pacchad Distt. Sirmour (Sh:- Construction of Reinforced Cement Concrete Main Storage Tank 75000 Ltrs Capacity) Eastimated Cost:- 667483- Earnest Money:- 13350/ Time:- 3 Months
Tender Value
6.67 Lakhs
Estimated cost
Bid Submission
24 Oct 2026
4 days left
EMD
13350
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirmaur → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Main Storage Tank In Village Mehlog Tehsil Pacchad Distt. Sirmour (Sh:- Construction of Reinforced Cement Concrete Main Storage Tank 75000 Ltrs Capacity) Eastimated Cost:- 667483- Earnest Money:- 13350/ Time:- 3 Months
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches in all type of soil such as pickwork jumper work Kankar, moorum, shingles including decomposed soft and hard rock etcupto all heights stacking the excavated earth not more than 3mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundations etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth in all leads and lifts as per the direction of Engineer in-charge. |
| 2 | Providing and laying cement concrete 1:4:8(1cement:4approved sand:8app.graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts. |
| 3 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to giv a fair finish including centring. shuttering. strutting and propping etc with wooden battens and ballies. height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs.and removal of the same for insitu-reinforced concrete and plain concrete work in :- |
| 4 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like, floors etc., up to 200mm in thickness. |
| 5 | b) Vertical surfaces such as walls(any thickness,) partitions and like including attached pillaster butresses plinth and string courses and the like and as per the the direction of Engineer-in-Charge. Including entire carriage of materail up to all leads and lifts. |
| 6 | Providing and laying cement concrete 1:1.5:3(1cement:1.5approved sand:3approved graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- |
| 7 | Foundation and plinth including entire carraige of material up to all leads and lifts. |
| 8 | Wall (any thickness but not less than 0.1m thickness) attached pillasters,buttresses plinth and string courses etc. from top to foundation level upto floor two level and as per the direction of Engineer-in-charge.including entire carriage ofmaterial upto all leads and lifts. |
| 9 | Providing and laying cement concrete work 1:2:4(1cement:2sand: 4 water borne aggregate 20mm nominal size & curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landing shelve and their supports balconies beams, girders bressumers and centilevers upto floor two level in all heights and depths including all leads and lifts carriage of material at site and as per directed by the Engineer-in-Charge. |
| 10 | Providing tor steel reinforcement for RCC work including bending,binding and placing in position complete upto floor two level.as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts. |
| 11 | Suppllying cast iron cover with frame of internal diversion of frame 455x610 mm rectangular CI position cover (light duty single pettern) the weight of cover to be not less than 23 kg including all leads, lifts and carriage of material at directed by the Engineer-in Charge |
| 12 | Laying and Jointing of GMS pipe (L Grade) in scour pipe and overflow inlet and outlet 50 mm dia |
| 13 | Steel work welded in built up sections, trusses, framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in gratings, framed guard bars, ladders railling, brackets and similar works with all leads and lifts. |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender