Tender For Costruction Of Record Room,Waiting Hall & Toilet At Zone Office In Ward No-15
Tender Value
26.51 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
12 days left
EMD
26600
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Costruction Of Record Room,Waiting Hall & Toilet At Zone Office In Ward No-15
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling B.M. in cement mortar under 3mtr height including stacking the useful materials for re-use & removing the debries away from work site within 50mtr lead |
| 2 | Dismantlling and removing cement concrete including stacking the useful materials for re-use and removing the debries within 50mtr lead. |
| 3 | Earth work excavation in foundation in hard soil or gravelly soil within 50mtr. initial lead and 1.50mtr initial lift including rough dressing and levelling the bed |
| 4 | Carriage of Excavated earth by mechanical means with in 5km lead including loading and unloading with all cost Conveyance T&P sun dries etc.complete as per direction of Enggineer-in-charge. |
| 5 | Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-charge. |
| 6 | C:C: (1:3:6) using 4 cm. size H.G. C.B metal including the cost of all materials, labour carriage, royalty etc complete. |
| 7 | Fly ash brick masonry in C.M. (1:6) in founadtion & plinth using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 |
| 8 | Fly ash brick masonry in C.M. (1:6) in super structure using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 |
| 9 | R.C.C. work of M20 grade with 20 mm down grade chips (C.B.) including Hoisting & laying (Data for 15 cum)a) Footing |
| 10 | b) Columns. |
| 11 | c) Plinth Beams |
| 12 | d) Lintel |
| 13 | e) Roof Beams. |
| 14 | f) RCC Slab . |
| 15 | g) Sun shade |
| 16 | h)plinth protection |
| 17 | Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding ( Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-in-charge Cold Twisted bars, Thermo-Mechanically-treated bars. |
| 18 | 12mm cement plaster on external RCC/brick surfaces in cement plaster 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 19 | 16mm cement plaster on internal smooth side of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 20 | 6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 21 | supplying fitting and fixing of vertrifed tile in floors of size 600mm x 600mm(plain) of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 Course sand) and filling joints with white cement of approved quality including cost , conveyance, taxes, cost of all labour etc. complete. |
| 22 | Providing and laying Matte Finish Ceramic wall tiles 300x300/450x450 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1cement:4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights. |
| 23 | Fixing cetamic tiles (300mm x300mm/400mm x 400mm) in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including the cost of pre-cast tiles |
| 24 | Providing and fixing of factory made Fenesta or equivalent UPVC sliding Window/Ventilator ( colour or approved) complete with U value=1.9-1.3 W/m 2k, flame resistance, self extinguishing, lead free comprising UPVC multi chambered frame having in built UPVC roller track on top and UPVC sash with wall thickness of 2.3mm duly reinforced with G.I section 2.6 mm where ever required. All corners of frame and sash will be fusion welded. After placing12.5mm laminate glass (6mm clear toughtened +1.5 pvg laminate+5mm clear glass) Annealed glass in the sash, with suppord of hurricane bar for high wind support. uPVC glazing bead, interlock, EPDM gasket brush shall be providede including multi lock and rollers & proper drainage system shall be provided. window frame will be fixed to the wall with 100mm long and 8mm dia.Fasteners and after fixing the gap between frame and adjucent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per approved drawing & direction of the Engineer -In-Charge. Note:- Profile Manufacturer & window manufacturer, installation of windows must be done through Manufacturing company, and then only Manufacturer warranty is acceptable) |
| 25 | Providing, fitting and fixing of approved make 32mm thick (laminate finished thickness of the door) factory made flush doors of the followings size, outside finished with 1mm thk. laminate of approved colour & shade and inside of the Room finished with 4mm thick vineer with melamine polish of approved make, colour & shade fixed to the teak wood bidding, complete in all respect bidding/lipping as per drawing/design. The door will be provided with all necessary fittings & fixtures, i.e. hinges, door stopper, door buffer etc. of Godrej of equivalent approved make with all materials, labour, T&P, taxes etc. as per direction of Architect/Engineer-in-Charge at all floors and all heights. |
| 26 | Supplying all amterials, albour, T&P and making of out door signage structure board of MS angles including wrought and put up etc. complete. |
| 27 | Priming one coat with any approved primer including the cost of labour & primer. |
| 28 | Distempeing two coats to wall surface including all labour & cost of materials. |
| 29 | Painting two coats with weather seal coat over a coat of water bound wall primer. |
| 30 | Painting two coats with any approved paint including the cost of enamel paint for wood work & Iron work. |
| 31 | 12mm thick C:P (1:4) over brick work including cement punning for skirting & dados. |
| 32 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick Flyash based Paver Pervious Concrete Blocks With approved colour design Pattern etc. complete. |
| 33 | 2.50 cm thick grading concrete using C.C. (1:2:2) on roof slab with 6mm sizes down graded H.G. chips on new work (For 1 Sqmt) |
| 34 | Fixing granite (0.1sqm to 0.40 sqm) in floor ,treads or steps and landing over 25mm bed of C:M(1;1)jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding thecost of pre cast tiles,. |
| 35 | Supplying ,Fitting & fixing of Stainless steel of 304 grade in hard railing using 50 mm dia of 2mm thick circular pipe with balustrade of size 32 mm x 32 mm x 2mm @ 0.90mtr.C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing, polishing etc with cost , conveyance, taxes of all materials, labour, T&P etc required for complete in all respect. |
| 36 | Providing & Fixing to wall or ceiling & floor pvc pipes 15mm diameter |
| 37 | 20mm diameter |
| 38 | 32mm diameter |
| 39 | Fixing Rotational moulded polythylene cylindrical vertical water storage tanks1000 litre capacity Double Layer Cylindrical Vertical water storage tanks |
| 40 | Hoisting Rotational moulded Polythylene cylindrical vertical water storage tanks |
| 41 | Cutting holes through existing brick work including making good the same in cement mortar(1:4) for taking GI/PVC pipes & fittings |
| 42 | Cutting grooves in pucca floors & walls for taking GI/PVC pipes & making good the damages |
| 43 | Brass Screw-down Bib-Cocks (Taps) Polished Bright 15mm dia Brass Screw-down Bib Cock |
| 44 | Fixing of Brass Gun Metal Full Way Valve20mm dia G.M. F. Way Valve |
| 45 | Providing & fixing on wall face unplasticised Rigid PVC soil, waste & rain water pipes75mm dia UPVC Single Socketed Pipe (Working pressure 4 kg/cm2) |
| 46 | 110mm dia UPVC Single Socketed Pipe (Working pressure 4 kg/cm2) |
| 47 | Providing & fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipesCoupler75mm |
| 48 | 110mm |
| 49 | Fixing Wash Down Water Closet (European type W.C. pan) with integral 'S' or 'P' trapVitreous china water closet 20\\" I.W.C (Orissa Pan) |
| 50 | Proving cding & fixing P.V.C. low level flushing cistern with manually controlled device10 litre capacity-White(low level) |
| 51 | Fixing wash basins with hole for pillar taps |
| 52 | Fixing PVC waste pipe 40mmX 800 mm long PVC corrugated waste pipe |
| 53 | Fixing Pillar taps capstan head screw down high pressure lettered 'Hot' & 'Cold' with long screws,shanks & back nuts15mm dia CP Pillar Cock |
| 54 | 15mm dia CP concealed stop Cock |
| 55 | 20 mm dia CP angular stop cock |
| 56 | Fixing Chromium Plated Brass Shower rose with 15mm or 20mm inlet including polishing all complete as per specification.15mm dia CP revolving shower |
| 57 | Fixing standard size Chromium Plated brass or glazed porcelain Toilet paper holder fixed to wooden plugs with chromium plated brass screws complete as per specification. |
| 58 | Fixing mirror of superior glass mounted on 6 mm thick A.C sheet or plywood sheet & fixed to wooden plugs with chromium plated brass screws & washers complete as per specification. |
| 59 | Fixing Standard Sized Chromium Plated brass towel rail complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws, complete as per specification.25 x 450mm long CP towel rail |
| 60 | Fixing standard sized Chromium plated brass towel ring fixed to wooden plugs with chromium plated brass screws, complete as per specification.Chromium Plated brass towel ring |
| 61 | Display Board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender