Tender For Periodical Maintenance Of Pwd Road To Jimbahal From Ch.0.000 To 0.650 Km For The Year 2026-27
Tender Value
8.47 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
8 days left
EMD
8470
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Maintenance Of Pwd Road To Jimbahal From Ch.0.000 To 0.650 Km For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area etc. complete as per direction of the Engineer in charge. |
| 2 | Providing and laying moorum on shoulder / Berm including all cost and conveyance of all materials and labour charges etc complete for finished item of work as per the direction of EIC. |
| 3 | Cleaning the existing black topped surface with removal of foreign materials with brooms soft brushes and finaly dusting with old gunny bags or compressed air to receive bituminous treatment as per direction of E I C. |
| 4 | Providing, laying, scraping, cleaning the road surface applying tack coat using 3.0Kg of bitumen for 10 Sqm and laying 75mm thick built up spray grouting in one layers 37.5mm thick each layer using 0.45cum of 25mm to 40mm size hard granite metal and 12.00Kg penetration grade of bitumen for 10 Sqm in each layer with 0.12cum of 12mm size hard granite chips as key stone for 10 Sqm spreading over and laying including heating pouring and spreading over and spreading bitumen metal and chips and rolling with PRR including hire and running charges of PRR and all other machineries including cost and conveyance of bitumen, metal and chips complete as per specification and direction of Engineer-in-Charge |
| 5 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using S-65 penetration grade bitumen @ 14.6 kg/10 sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508 of MoRD and as per direction of Engineer-in-Charge . |
| 6 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MoSRT&H Specifications for Road & Bridge works (4th Revision) |
| 7 | Labour for laying 6mm thick Precoated Seal coat type B using 0.06cum of 06 mm size and down graded as per sieve analysis and 6.80kg of bitumen per 10sqm and applying tack coat 2kg of bitumen for 10sqm including hire and running charges of P.R.R. Hot mix plant tar boiler, cost, carriage and royalty etc. complete as per direction of the Engineer in Charge. |
| 8 | Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment ,level and slopes and as per the direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender