Tender for Supply of Various Items for mc Washim .

Sharing tender

Tender for Supply of Various Items for mc Washim . 1 Spplying and erecting cast iron poleof 8 M height Single arm Classic Ornamental Combo Pole with base made out of S.G.Iron grade 500/7, shaft made of MS Pipe in 3 Sections (Bottom dia: 139 mm, Middle dia 114, Top dia: dia: 60 mm) and rings made of Cast Iron and base casting made out of S.G.Iron grade 500/7, painted with Polyurethane paint for UV stabilization. Cast Iron material used for casting of embellishments of Grade FG-150/220. MS pipes used shall be ISI - marked & of B-class as per the IS 1161. Bracket Arm is of suspended type with arm made of MS pipe as per IS: 1161 and bracket shaft pipe of 42 mm dia and arm made of Cast Iron. Arm Width for the single arm is 900 mm. Embellishment on bracket arm is made of cast iron heritage type. Each cast piece is shot blasting to remove all its external dirt and residues etc. All CI & MS units are given an extensive treatment with PU based etch primer and paint prescribed for such surfaces to make it absolutely rust and corrosion proof, as well as giving it a pleasing appearance through antique finish. Minimum DFT level is 60 Microns. All the joints and carvings of the pole unit shall be free from any kind of distortion for a pleasing aesthetic look. The pole is structurally designed to sustain desired wind load at location. The Pole unit should be grouted using 3 nos. anchor J-bolts of size M-20 x 600 mm long with PCD 425mm confirming to EN 8 Grade. Total height of the pole along with Bracket is 9000mm. A suitable service window shall be provided in the base of pole to allow access to electrical connections and terminations.1.01 Supplying and erecting the ornamental aluminium powder Coated Housing with PDC heat sink optical grade injection mounted polycarbonate clare diffuser high bright LED For Better output Constant current Electric driver Provided with high Voltage open & short circuit protation suitabale for Q42mm id Pole LED Landscape light 100 Watts Luminaire flux 6000 Im Lumeen Efficacy 100 Im/w Correlanted Colore Temperatur 5665k+3555K Colour Rendering Index 70 maintenance of lumex output 50000 hrs operating Tempereature Range 10 c to 50 C input Voltage 140 to 270 v AC Current in Amp 0.263 A External Surge protection 10kv ingraess protection IP65 Net Wight 7.2kg Approx light fitting having suitable connector for fixing on required post. The fixture have casted part which are well assembeled design for bettar look. it shall have designed to illuminate large area with its wide Dispersion without affecting the environement. It shall have glass fixture to cover light and stainless steel fasteneing element for assembling light. The fixtures havingprovision to fix complete with required power supply.for access to the electric and optical auxillary compatment with silicon gaskets fixing. As regarding the electrical auxillaries for LED Module & input frquence of 50 HZ, THD<10% with inbuilt surge protection of 10KV Ac and High grade heat sink in extredud aluminium with silicon compound used for PCB heat tranfer. Each LED with specfic lens for uniform photometric distribution. 1.02 Providing, supplying and laying natural stone cobble/paving blocks of approved quality, of nominal size 100 mm × 100 mm (4 × 4) and 60 mm thickness, made from hard, dense, sound, durable and weather-resistant natural stone such as Black Basalt/Trap or Granite, machine cut and properly dressed on all sides, with reasonably uniform dimensions, true and straight edges and uniform texture/colour, free from cracks, seams, cavities, weathered portions and other defects. The cobble stones shall be laid over a properly prepared and compacted bedding layer as specified by the Engineer-in-Charge, maintaining required line, level, slope and camber, with close and uniform joints, joints filled with clean fine sand, followed by mechanical plate compaction and finishing. The item shall include supply, transportation, loading, unloading, stacking, cutting, dressing, laying, fitting, joint filling, compaction, labour, tools, plant, machinery, wastage and all incidental works complete as directed by the Engineer-in-Charge.Total in Figures Quoted Rate in Figures Quoted Rate in Words