Tender For Running, Maintenance & Operation Of Specialized Electrical & Mechanical Services Installed At Various Residential Flats Near Lok Niwas Marg And Honble Lg Secretariate Under M4512, Delhi (Sh :-Upgradation Of Coreip Make Ip Pbx System )
Tender Value
53.99 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
1 days left
EMD
1.07 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Running, Maintenance & Operation Of Specialized Electrical & Mechanical Services Installed At Various Residential Flats Near Lok Niwas Marg And Honble Lg Secretariate Under M4512, Delhi (Sh :-Upgradation Of Coreip Make Ip Pbx System )
BOQ
| Sl. No. | Item Description |
| 1 | Up gradation of CoreIP IP PBX System with 30 user to 300 users advance Universal license with 2 Nos 2 U server with configuration 12 core processor, redundat power supply, Dual Giga bit ETH Ports, 16GB DDR5 RAM, 1 x 2TB GB HDD. End points - (IP phones, Smart Mobile Phones, Analog Phones & Video Phones).VPN Server & Client Should be Built-in in the solution. Voice Mail & Voice Mail to Email for all users. Support IPV4 & IPV6 from Day one. * 300 IP User Licence * 16 Port FXO - 1No * SIP Trunk - 30 Channal * 32 party Conference * Call billing software* NMS software * Builtin Firewall for IPPBX * Complete Testing & commissioning etc. |
| 2 | Supplying, installation, Testing and commissioning of IP Phone (SIP supported) with following specifications:- a) 10 SIP lines with Two port 10/100/1000 Ethernet switchb) Integrated POE on IEEE 802.3afc) Full-duplex speaker phone with AESd) 4.3” 480x272 main color displaye) 10 Line key with LED All necessary accessories to connect the switch and SIP phones will be included in the scope of supply. |
| 3 | Supplying, installation, Testing and commissioning of following capacity 24 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: At least 24 X RJ-45 Gigabit Ethernet Ports and additional 2 X 10G Base -T with 4 X SFP Ports with non-blocking architecture by having Switching capacity of min. 168Gbps and packet forwarding rate of 125Mpps or higher, 16K MAC table. Console Port, USB port, Stacking support of min. 8 units per stack. Internal dual AC Power supply, STP, RSTP, MSTP, BPDU Filter, BPDU Restriction, Min. 9K Jumbo Frame, LBD, IGMP Snooping V1/V2/V3, MLD Snopping V1/V2. IGMP /MLD Groups 1K or more, IPv4/IPv6 Loopback Interface, 16 L3 IP Interface, Ipv6 ND, VRRPv3, UDP Helper, ECMP. VLAN: 802.1Ǫ, Port based, Ǫ-in-Ǫ, Multicast VLAN, Protocol VLAN, VLAN Trunking, DHCP Snopping, Server, server Screening. RADIUS , TACACS+ Authentication, ǪoS: 802.1P, 8 queues per port, ǪoS : WRR, Strict+WRR, WRED, 802.1p. ACL: MAC based, IPv4C IPv6, TCP/UDP Port number, time based ACL, TFTP Client, SNMP V1, v2c, v3, SNMP traps, RMON, DHCP server, relay, client, LLDP, LLDP-MED, OAM, Dying Gasp, 802.3ah, sflow, RIP, OSPF v2/v3, policy based route, SSL, SSH. 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required..a) (a) 24 port PoE Layer 2 Network Switch with PoE Support of 370W or higher with each copper port supporting 802.3at PoE+ min. |
| 4 | Supplying Installation Testing and Commissioing of DSS Module for IP Phone with Techncial specificaion - (a) 32 and above Physical Programable keys. (b) Must have dual-color LED indicators (c) Powered with connecting IP Phone with Type C connector. (d) No additional power is required. (e) To be supplied with cables for connecting to IP Phone. |
| 5 | Supplying Installation Testing and Commissioing of IP Phone (SIP supported) with following specifiationsa)4 SIP lines with Two port 10/100/1000 Ethernet switch (b) Integrated POE on IEEE 802.3af (c) speaker phone with AES (d) 2.4” 320x240-pixel LCD with color display |
| 6 | Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel. 24 Ports Cat-6 Patch Panel should have ETL/UL verification program certificate for compliance with ANSI/TIA-568. 2-D etc. complete as required. |
| 7 | Supply, Installation, Testing and Commissioning of Information Outlet Set(I/0) : Single/Dual Face Plate Square (86 x 86mm) x 12 mm Shutter on Face Plate Two Piece design : Mounting Frame and Cover Plate Should support UTP and STP Jacks Cat5e, Cat6 and Cat6A Plug Reliability : 750 |
| 8 | Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted 275 DELHI SCHEDULE OF RATE (E&M) 2025 Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should bein the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc. complete as required.(a) 1 Run cable |
| 9 | Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required.a)Copper Patch Cords of length 1m (3ft) |
| 10 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface /recesses including cutting the wall and making good the same in case of recessed conduit as a) 25 mm Dia |
| 11 | Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0. 8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1. 6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. a) 6U Rack |
| 12 | b) 15U Rack |
| 13 | Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568. 2-D etc. complete as required. a) Copper Patch Cords of length 1m (3ft) |
| 14 | Supply & Fixing of Following size of 25 X25 mm PVC Channel along with accessories in surface of wall etc required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender