Tender For Renovation And Maintenance Work Of Room Nos. 018, 020, 112, 311, 211, 117, 122, 317, V-31 & 316 (Non-Ac Rooms) At Tripura Bhavan, H.C. Block, Salt Lake, Sector-Iii, Kolkata-106, Along With Sh:/ Minor Repair Works, Plumbing Repairs, Door &
Tender Value
32.05 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
5 days left
EMD
64117
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Maintenance Work Of Room Nos. 018, 020, 112, 311, 211, 117, 122, 317, V-31 & 316 (Non-Ac Rooms) At Tripura Bhavan, H.C. Block, Salt Lake, Sector-Iii, Kolkata-106, Along With Sh:/ Minor Repair Works, Plumbing Repairs, Door & Window Repairs And Other Necessary Maintenance Works In Tripura Bhavans, Kolkata.
BOQ
| Sl. No. | Item Description |
| 1 | 14.22 Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in -chargeSOR 2023 Buildings |
| 2 | 11.1 Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete as per direction of Engineer-in-charge.(SOR'2023) Building0.63mm thick with zinc coating not less than 275gm/m2 |
| 3 | 11.4 Providing ridges or hips of width 60 cm overall widthplain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc. complete as per direction of Engineer-incharge(SOR'2023) Building11.4.2 0.63mm thick with zinc coating not less than 275gm/m2 |
| 4 | 13.30 Repairs to plaster of thickness 12 mm to 20 mm inpatches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:13.30.2 With cement mortar 1.4 ( 1 cement : 4 fine sand ). (SOR'2023) Building |
| 5 | 13.50 Painting with acrylic exterior paint (one or\\"more coats ) of required colour of approved brand and n anufaclure on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge..(SOR’2023)Building |
| 6 | 13.10 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.13.10.1 Internal Work-Exposed on wall (SOR’2023) Building |
| 7 | 13.41 Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge.(SOR’2023) Building (SOR’2023) Building |
| 8 | 13.47 Painting on wood work with oil type wood preservative ( one or more coats ) of approved brand and manufacture on old work including preparation of surfaœ as required complete as per direction of the Engineer in charge.(SOR'2023) Building |
| 9 | 14.10 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 14.10.1 Of area 3 sqm and below. (SOR'2023) Building |
| 10 | 14.29 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-incharge: 14.29.1 Up to 150 mm diameter |
| 11 | 18.82 Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:18.82.2 Single socketed pipe - 110 mmOD |
| 12 | 18.87 Providing and fixing to the inlet mouth of soil, waste & vent pipes pipe PTMT grating with thickness of 8mm andweighting not less than 100gm. complete. 18.87.2 100mm |
| 13 | 7.18 Rewinding of Horizontal Motor suitable for centrifugal pumps by complete dismantling in/c providing & rewinding z/ith Super enamelled copper conductor (as per IS : 13730 Part-3) conductor & all necessary spare parts and eassembling thesame including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.iii. 3.0-5.0 HP SOR DWS2023 |
| 14 | 14.21 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.(SOR’2023) Building |
| 15 | 10.42.3 Glazed Vitrified Tiles (Glossy / Mat Finish/ Anti-Skid) Size of tile 1200 mm x 600 mm (SOR’2023-10.42.3.2) |
| 16 | 10.40 Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed With pigment of matching shade etc. all complete as per direction of the Engineer in-charge.10.40.1 450 mm X 300 mm in all shades and design(SOR'2023) Building |
| 17 | 14.33 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.(SOR’2023) Building |
| 18 | 14.9 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :14.9.1 Of area 3 sqm and below.(SOR'2023) Building |
| 19 | 14.9.2 Of area beyond 3 sqm. |
| 20 | 19.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent sement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(SOR’2023) BuildingConcealed work including cutting chases and making good e walls etc. 19.8.1 15 mm nominal outer dia .Pipes. |
| 21 | 19.8.2 20 mm nominal outer dia .Pipes. |
| 22 | 8.5 Providing and fixing panelled / or panelled and glazed utters for doors, windows and clerestory windows including I marked bright finished / black enamelled M.S butt hinges th necessary screws excluding panelling and or glazing, ich will be paid for separately but including the wooden ading of 20 • 12 mm for fixing panelling and or glazing as r direction of Engineer-In-Charge.(SOR’2023) Building3.5.1 Local Teak wood |
| 23 | 8.5.1.2 30 mm thick shutters |
| 24 | 18.82 Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap forthermal expansion:(SOR'2023)Building18.82.2 Single socketed pipe - 110 mm OD |
| 25 | 18.19 Providing and fixing controlled flush, low level cisternmade of vitreous china with all fittings complete.18.19.1 10 litre (full flush) capacity-white |
| 26 | Providing and fixing superior quality basin mixer of approved brand with two concealed stop cocks with basin spout(composite one piece body)compIete as per directioFI f the Engineer in Charge (Jaguar make code-FUS-29433) (approved rate) Aggrement No.T/EE-1/AGAR/EE-1/57/2023-24 |
| 27 | Providing & fixing 3-in-1 CP Wall mixer tap of JAQUAR/PARRYWARE/ROYAL/HINDWARE as selected & approved as per direction of the Engineer-In-Charge (approved rate) Aggrement No.TlEE-1/AGAR/EE-1/57/2923-24 |
| 28 | 8.114 Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension, as below (tolerance +/- 1mm) with wall thickness 2.0mm+/- 02mm. corners of the door frame to be jointed with galvanized brackets and stainless screws, joint mitred and plastic wilded. The hinge side vertical of the frames reinforced by galvanized MS tube of size 19 • 19 mm and 1 mm +/- 0..1 mm wall thickness and 3 nos stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-Charge.8.114.1 Extruded section Profile size 48x40 mm. |
| 29 | 8.115.2 30mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC profile section of size 30mm x 60mm and wall thickness 2mm 1 0.2mm with inbuilt decorative moulding edging on one side. The styles and rails with plastic brackets of size 75x220 mm mitred and welded at the corners. The styles of the shutter reinforced by inserting galvanised MS tube of size 25x20 hurl and 1 mm I 0.1 mm wall thickness. The lock rail made up of \\"H\\" Section, a UPVC profile section of size 30•100 mm and 2 mm 1 0.2 mm wall thickness welded to the shutter 5.67 style with a UPVC profile section single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm 1 0.1 mm wall thickness with 20 mm panel beading of suitable sizelGlass (4 mm thick plain gIass)i louver section, louver frame of suitable size, complete as per manufacturer's specification and direction of Engineer-In-Charge. (for W.C. and Bathroom door shutter). (SOR’2023)Building Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender