Tender For Development Of Road By Providing & Fixing Road Signs, Road Studs, Road Marking, Crash Barrier, Delenators Etc At Differtent Roads Under J Ui Hill Sub-Division, Pwd(R&B) During The Year 2026-27.
Tender Value
56.93 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
19 days left
EMD
1.13 Lakhs
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Road By Providing & Fixing Road Signs, Road Studs, Road Marking, Crash Barrier, Delenators Etc At Differtent Roads Under J Ui Hill Sub-Division, Pwd(R&B) During The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Painting Lines, Dashes, Arrows etc on Roads in Two Coats on old Work Painting lines, dashes, arrows, etc. on roads in two coats on old work with ready mixed road marking paint conforming to IS:164 on bituminous / concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and MoRD Technical Specification Clause1702. |
| 2 | Road marking strips (retro-reflective) of specified shade/colour using Hot Applied Thermoplastic material with Reflectorising Glass Beads on Bituminous Surface Providing and applying 2.5 mm thick thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material including reflectorising glass beads@ 250 gms per sqm area by fully/ semi automaticthermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater including cost of cleaning the road surface of all dirt, seals, oil, grease and foreign material etc, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes as per MoRT&HTechnical Specification Clause 803. |
| 3 | Road Markers/Road Stud with Lens ReflectorProviding and fixing of road stud 100 x 100 mm die cast inaluminium, resistant to corrosive effect of salt and grit,fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873(Part 4) 1973. |
| 4 | Rumble StripsProvision of 15 nos. rumble strips covered with premix bituminous carpet, 15-20 mm high at centre, 250 mm wide placed at 1 m centre-to-centre at approved locations to control speed, marked with white strips of road marking paint. |
| 5 | Retro-reflectorised Traffic SignsProviding and fixing of retro-reflectorisedcautionary, mandatory and informatory sign as perIRC:67 made of encapsulated lens type reflectivesheeting vide MoRD technical specification Clause1701.2.3 fixed over aluminium sheeting, 1.5 mmthick supported on a mild steel angle iron post 75mm x 75 mm x 6 mm firmly fixed to the ground bymeans of properly designed foundation with M 15grade cement concrete 450 mm x 450 mm x 600mm, 600 mm below ground level as per drawingsand MoRD Technical Specification Clause 801.i) with 600 mm equilateral triangle aluminium sheeting |
| 6 | ii) with 600 mm circular aluminium sheeting |
| 7 | iii) with 600 x 600 mm square aluminium sheeting |
| 8 | Type - B, \\"THRIE\\" : Metal Beam Crash BarrierProviding and erecting a \\"Thrie\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with aspace of channel section 150 x 75 x 5 mm, 546 mm long complete as per MoRT&H Technical Specification Clause 811. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender