Tender For Repair / Maintenance Of Joinery, Plastering, Plumbing, Sanitary And Certain B&R Works For Dept Of Chinese Language, Burmees Language, English Language, Dept Of Map Craft, Hrdc, Dept Of Education Flw(S), Flw(N), It Cell, Mapps, Amn Point, C
Tender Value
9 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
0 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Joinery, Plastering, Plumbing, Sanitary And Certain B&R Works For Dept Of Chinese Language, Burmees Language, English Language, Dept Of Map Craft, Hrdc, Dept Of Education Flw(S), Flw(N), It Cell, Mapps, Amn Point, Community Hall & Religious Institutes And Other Dept At Aec Training College And Centre Pachmarhi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed by Engineer-in-charge. |
| 2 | Taking down shutter of any description n exc 1 sqm each complete all as specified and directed by Engineer-in-charge. |
| 3 | Taking down chowkat with shutter (without taking off shutter from the frame) area exc 1.5 sq.m but n.exc 4 Sqm each and removing from the site complete all as specified and directed by Engineer-in-charge. |
| 4 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 sqm each complete all as specified and directed by Engineer-in-charge. |
| 5 | S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete all as specified and directed by Engineer-in-charge. |
| 6 | S&F anodised aluminium frame with powder coating (minimum thickness of powder coating 50 micron) for doors window ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-charge. |
| 7 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including glass and ss wiremesh,powder coating necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer-in-charge. |
| 8 | M&L Framed work such as grills, gratings, etc.. with ends of barsshouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming toto Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-charge. |
| 9 | S & F factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed by Engineer-in-charge. |
| 10 | S&F pressed steel frame size (105 x 60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-charge. |
| 11 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete all as specified and directed by Engineer-in-charge. |
| 12 | S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed by Engineer-in-charge. |
| 13 | S&F 100 mm size MS butt hinges medium weight cold rolled fixed with screws to framecomplete all as specified and directed by Engineer-in-charge. |
| 14 | S&F125 mm long,aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-charge. |
| 15 | S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-charge. |
| 16 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engineer-in-charge. |
| 17 | S&F 125 mm size aluminium handles, cast type, anodised complete all as specified and directed by Engineer-in-charge. |
| 18 | S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed by Engineer-in-charge. |
| 19 | M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0 .5 sqm each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames. complete all as specified and directed by Engineer-in-charge. |
| 20 | S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specified and directed by Engineer-in-charge. |
| 21 | Hacking out old glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed beads complete all as specified and directed by Engineer-in-charge. |
| 22 | M&L type C1 Cement concrte 1:3:6 (20 mm graded aggregate) for insertion of hold fast, in MS door frame etc. incl. necessary form work etc complete all as specified and directed by Engineer-in-charge. |
| 23 | Demolition of cement concrete in ground floors and pavings not exc 15cm thick complete all as specified and directed by Engineer-in-charge. |
| 24 | Material and labour for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor finished even and smooth with out using extra cement complete all as specified and directed by Engineer-in-charge. |
| 25 | M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in floor, including rough finished with out using extra cement complete all as specified and directed by Engineer-in-charge. |
| 26 | Dismantling of floor, hearth or wall tilling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge. |
| 27 | M & L for double charged vitrified tiles 8-9 mm thick area of each tile n exc 0.36 Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cment to match colour tiles complete all as specified and directed by Engineer-in-charge. |
| 28 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cment to match colour tiles complete all as specified and directed by Engineer-in-charge. |
| 29 | Material and labour for Premium quality, glazed coloured ceramic tiles 200 x 300 x 7mm thick on vertical faces including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed by Engineer-in-charge. |
| 30 | M & L for Glazed ceramic coloured tiles in vertical surface 350x250x7mm/ 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cm 1:3 complete all as specified and directed by Engineer-in-charge. |
| 31 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-charge. |
| 32 | Material and labour for machine cut kota stone slab 20-25 mm thick (of size not less than 55 cm x 55 cm) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:6) base including rubbing and mirror polishing, complete all as specified and directed by Engineer-in-charge. |
| 33 | M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and directed by Engineer-in-charge. |
| 34 | Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-charge. |
| 35 | M&L for suspended false ceilling comprising of 6mm thick non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engineer-in-charge. |
| 36 | Demolition of brickwork built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-charge. |
| 37 | Material & labour old size brick work with sub class 'B' bricks in CM 1:6 brick straight or curved on plain exeeding 6m mean radius complete all as specified and directed by Engineer-in-charge. |
| 38 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-charge. |
| 39 | M & L for rendering 15mm thick on other than fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement)., complete all as specified and directed by Engineer-in-charge. |
| 40 | M & L for rendering 12mm thick in CM (1:6) on brick work or concrete surfaces finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge. |
| 41 | Material and Labour for 5mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge. |
| 42 | Supply only integral water proofing compound of approved brand/make, complete all as specified and directed by Engineer-in-charge. |
| 43 | Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to store complete all as specified and directed by Engineer-in-charge. |
| 44 | Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to store complete all as specified and directed by Engineer-in-charge. |
| 45 | S&F 500 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position complete all as specified and directed by Engineer-in-charge. |
| 46 | S&F 1000 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position complete all as specified and directed by Engineer-in-charge. |
| 47 | S&F in repair ball valve/float ball high pressure of PTMT 20mm with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc complete all as specified and directed by Engineer-in-charge. |
| 48 | Taking up or down 15mm bore steel tubing and connections, complete all as specified and directed by Engineer-in-charge. |
| 49 | Taking up or down 20mm bore steel tubing and connections, complete all as specified and directed by Engineer-in-charge. |
| 50 | Supply and fixing steel water tubing of 15 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed by Engineer-in-charge. |
| 51 | Supply and fixing steel water tubing of 20 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor, wall and on ceiling, complete all as specified and directed by Engineer-in-charge. |
| 52 | S & F in repairs bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-charge. |
| 53 | S & F in repairs 15mm dia stop valves / angle cock fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-charge. |
| 54 | S & F in repairs 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. |
| 55 | S & F in repairs 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. |
| 56 | Supply and fixed (in repair) PVC connections 45cm long and 15mm dia with chromium plated brass nuts and PVC washers on both ends, complete all as specified and directed by Engineer-in-charge. |
| 57 | S & F in repairs vitreous china wash basin, white flat back, size 550 X 400 mm excluding taps, chain and plug and porcelain stopper but including brackets, waste coupling, waste pipe etc complete all as specified and directed by Engineer-in-charge. |
| 58 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed by Engineer-in-charge. |
| 59 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low levelcistern complete all as specified and directed by Engineer-in-charge. |
| 60 | S & F in repairs 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-charge. |
| 61 | S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed by Engineer-in-charge. |
| 62 | S & F in repairs 20 mm dia brass chromium plated tubular towel rail, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-charge. |
| 63 | S & F in repairs Health faucet (ABS Body) mild steel CP 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl fixed in position complete all as specified and directed by Engineer-in-charge. |
| 64 | S&F in repairs stainless steel toilet paper holder fixed with wooden gutties and screws to wall surfaces complete all as specified and directed by Engineer-in-charge. |
| 65 | S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed by Engineer-in-charge. |
| 66 | Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified and directed by Engineer-in-charge. |
| 67 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed by Engineer-in-charge. |
| 68 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed by Engineer-in-charge. |
| 69 | M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed by Engineer-in-charge. |
| 70 | S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified and directed by Engineer-in-charge. |
| 71 | S&F 4mm thick sheet glass ordinary quality exc 0.5 Sqm, concrete or brick surrounds, glazed with putty or fixed beads complete all as specified and directed by Engineer-in-charge. |
| 72 | S&F for in repair Brass chromium plated shower rose 125mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-charge. |
| 73 | S&F in repair C.P. grating 100mm square/round with or without hole complete all as specified and directed by Engineer-in-charge. |
| 74 | S&F in repairs 40 mm dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed by Engineer-in-charge. |
| 75 | M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying one coat of Oil Bound Distemper complete all as specified and directed by Engineer-in-charge. |
| 76 | M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying two coat of Oil Bound Distemper complete all as specified and directed by Engineer-in-charge. |
| 77 | M&L for complete removal of existing surface of walls and applying two coats of oil bound distemper white or tinted over 1 mm thick white wall care putty complete all as specified and directed by Engineer-in-charge. |
| 78 | M & L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed by Engineer-in-charge. |
| 79 | M & L for preparation of old plastered surfaces of walls and applying two coat of white wash complete all as specified and directed by Engineer-in-charge. |
| 80 | M & L for preparation of old plastered surfaces of ceilings and applying one coat of white wash complete all as specified and directed by Engineer-in-charge. |
| 81 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge. |
| 82 | M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge. |
| 83 | M & L for preparation of new painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engineer-in-charge. |
| 84 | M & L for preparation of new plastered surface of wall and applying two coats of cement base paint with alkali resistant priming paint complete all as specified and directed by Engineer-in-charge. |
| 85 | M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed by Engineer-in-charge. |
| 86 | M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-charge. |
| 87 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete all as specified and directed by Engineer-in-charge. |
| 88 | M&L for preparation of old cement based surfaces of walls and applying one coat of cement based paint complete all as specified and directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender