Tender For Special Repair To Bldg No P-3 At Cod Dehu Road
Tender Value
48.43 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
11 days left
EMD
96861
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-3 At Cod Dehu Road
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick or stone work built in cement mortar including all arches, pillars all quoins etc complete all as directed. |
| 2 | M & L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified |
| 3 | Dismantling wall/ ceiling boards(fiber pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets |
| 4 | S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing& fixing 10-12 mm thick gypsum board 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified as directed by Engr-in-charge |
| 5 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. |
| 6 | M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing, over and including screed bed of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified. |
| 7 | Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite screed bed of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed. |
| 8 | Dismantling of PVC water tank of capacity exc 250 ltr & n exc 500 litre complete all as specified and directed. |
| 9 | S & F rotational moulded polyethylene water storage tank of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. |
| 10 | Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed. |
| 11 | M&L for vitrified ceramic tiles 10mm thick, light shade (square/rectangular) polished, area of each tiles exceeding 0.36sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or cloloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete |
| 12 | M&L for vitrified ceramic tiles 10mm thick, light shade (square/rectangular) polished, area of each tiles exceeding 0.36sqm but not exceeding 0.42 sqm, as in vertical surface or skirtings etc. set and jointed in neat cement slurry and pointed in white or cloloured cement to match over and including 10 mm th rendering in CM (1:4) complete. |
| 13 | M&L for Non-skid white Ceramic tiles of size 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified. |
| 14 | M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 8 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement over and including backing coat 10mm thick in CM 1:4 all as direced. |
| 15 | Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store. |
| 16 | All as per item No 15 but n'exc 1.5 Sqm each. |
| 17 | Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed. |
| 18 | Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing |
| 19 | S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing. |
| 20 | S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm. |
| 21 | S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm. |
| 22 | S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified. |
| 23 | S & F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 24 | Dismantling wooden Boarding of any description |
| 25 | S & F medium density particle board, 18/19 mm thick, flat pressed three layer or multilayer and graded (grade I or grade II) bonded with BWP adhesive , fixed with screws to timber frame work/steel frame work for kitchen cabinet etc complete all as specified |
| 26 | S & F medium density particle board, 25mm thick, flat pressed three layer or multilayer and graded (grade I or grade II) bonded with BWP adhesive , fixed with screws to timber frame work/steel frame work for kitchen cabinet etc complete all as specified |
| 27 | S & F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. (for Kitchen cabinets, cupboards) |
| 28 | S & F of 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed. |
| 29 | S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed. |
| 30 | S&F 100 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete. |
| 31 | S&F 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete. |
| 32 | S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed. |
| 33 | S & F for 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate complete |
| 34 | S & F in repairs 25 mm chromium plated aluminium alloy anodised curtain rails with fixed to brackets, stops, complete all as specified and directed. |
| 35 | S & F in repairs Ball brass valve high pressure with polythene float and nuts complete screwed for iron pipe or brass furrule bore of pipe 20 mm dia complete all as specified. |
| 36 | Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm. |
| 37 | All as per item No. 36 above but bore of pipe 20mm |
| 38 | Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete incl concealed etc all as specified |
| 39 | Supplying and laying 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete incl concealed etc all as specified |
| 40 | S&F in repair stop valves fancy type chromium plated with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe. |
| 41 | Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 42 | S&F PVC SWR Nahani/floor trap plain with grating including jointing with solvent cement, dia of outlet 75mm, water seal minimum 75mm, complete all as specified |
| 43 | S&F for chromium plated two way bib cock with wall flange 15mm dia equivalent of make as per Appx 'A' as approved by GE all as specified and as directed. |
| 44 | S&F in repairs bib taps chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe. |
| 45 | S&F Grating round 140 mm size of PTMT (Minimum weight 50gms.) |
| 46 | S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including waste pipe, porcelain stopper and brackets including cutting for and pinning in ends of brackets or erecting stand PVC connection 15mm dia , 450 mm long HDPE pipe etc. complete all as specified |
| 47 | S&F in repair 15mm nominal size,fancy type pillar taps, cast copper alloy body and body components with capstan heads, spindle, washer plate and nut with screwed shanks and back nut, with or without lettered hot or cold, nickel-chromium plated finish complete all as specified |
| 48 | Supply and fix in repairs for vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed. |
| 49 | S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm |
| 50 | S&F PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets). |
| 51 | S & F 600xmmx450mm bevelled edge mirror of selected quality galss, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 52 | Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete. |
| 53 | M&L for rendering 15 mm and dubbing coat 10 mm thick on stone masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces ) in cement mortar 1:6 finished even and smooth without using extra cement and using chicken wiremesh on wall surface for rendering complete including dobbing coat out complete all as specified and directed by Engr-in-Charge. |
| 54 | M&L for rendering 15 mm and dubbing coat 10 mm thick on stone/brick masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces ) in cement mortar 1:4 finished even and smooth without using extra cement complete and using chicken wiremesh on wall surface for rendering complete including dobbing coat out complete all as specified and directed by Engr-in-Charge. |
| 55 | M&L for 5 mm thick rendering on ceiling surface in cm 1:3 on concrete surface of roof slab , beam column etc finished even and smooth without using extra cement |
| 56 | M&L for preparation of newly plastered surface of wall and applying two coats of distemper oil emulsion over and including 3 mm thick wall care putty and a coat of alkali resistance primer etc. complete all as specified and directed by Engr-in-Charge. |
| 57 | M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 58 | M&L Two coat of synthetic enamel paint on New steel surfaces nexc 10 cm width or girth incl prepration of surfaces over red zinc chrome primer complete |
| 59 | S & F Three track sliding anodised aluminium window, Ventilators without sash bar, aluminium section weighing 0.55 kg/m including necessary window frames,shutters, joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed. |
| 60 | Excavating in Trenches, not exc. 1.50 M wide and not exc. 1.50 M in depth, for Foundation, Manhole, Shafts, well cesspits, pier holes n.exc 10 Sqm on plan and n.esc 1.5m in depth and getting out in Soft/ Loose Soil, complete all as specified and as directed. |
| 61 | Demolition and breaking up drain pipes RCC set in cement mortar 150mm bore complete all as specified and directed. NOTE: (i)The measurements shall be taken long the centre line of pipe and fittings. (ii)Excavation work shall be measured separately. |
| 62 | Demolition and breaking up drain pipes RCC set in cement mortar 200mm bore complete all as specified and directed. NOTE: (i)The measurements shall be taken long the centre line of pipe and fittings. (ii)Excavation work shall be measured separately. |
| 63 | M/L 150mm bore reinforced cement concrete pipe Class NP2 laid and jointed complete with collars and laid in trenches including testing all as specified and directed. |
| 64 | M/L 200mm bore reinforced cement concrete pipe Class NP2 laid and jointed complete with collars and laid in trenches including testing all as specified and directed. |
| 65 | M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 150 mm bore RCC pipe. |
| 66 | M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 200 mm bore RCC pipe. |
| 67 | Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 250mm in Soft/Loose Soil, complete all as specified and as directed. |
| 68 | Removing the excavated surplus soils exc 1.5KM n.exc 5 KM and depositings where directed at a level n.exc 1.5 mtr above the starting point (Note : Site of disposal of soil is to located by Contractor himself. If any extra lead for disposal of soil behind 5km will be bear by the Contractor) |
| 69 | Supply and fix for 50 mm thick, 900X650mm, heavy duty, factory made precast RCC (1:2:4) type B1 (using 20 mm graded broken stone aggregate) including MS TMT bars 6mm dia @ 150mm C/C both way and set in CM (1:4) finished the surface even and fair complete all as specified and as directed. |
| 70 | S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls |
| 71 | All as per item No but 110mm dia |
| 72 | M&Lfor PVC (SWR) vent cowl of 110mm dia |
| 73 | S&F.110 mm dia PVC (SWR) bends, any radius with access door |
| 74 | M&L(SWG) gully trap 125/110 mm setting and jointing with solvent cement. |
| 75 | S&F Anodised aluminium Powder coated louvered ventilator with provision of exhaust fan using jindal aluminiam section or equivalent make as specified including glass 3 mm thick ordinary quality frosted and stainless steel wire mess 0.36 mm dia wire and 1.40 mm aperture etc including taking out old frame shutter complete all as specified. |
| 76 | M & L for Rendering 10 mm thick in cement mortar 1:4 using water proofing compound @ 3% of weight of cement on RCC roof slab, finished even & smooth without using extra cement as directed by Engineer-in-chargeNote : Water proofing compound shall be measured and paid saperately |
| 77 | Demolition of plain cement concrete in Roof portionas specified. |
| 78 | M&L for avg 40 mm thick cement conceret 1:2:4 type B-1, (20mm graded aggregate) as in levelling course on roof top channel & floor finish complete all as specified and as directed. |
| 79 | M & L for taking out old water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge (a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer. (b) On the dried roof surface, apply one coat of bituminous primer @ 100 Gm/ Sqm as per manufacturers instruction.(c) On this primed surface, the approved APP modified bituminous membrane with non woven polyester mat asreinforcement weighing not less than 3.5 Kg/ Sqm laid by torch application metho and top surface shall be applied with bituminous aluminium paint.(d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction. Note:-Obtain material through out low laying Area |
| 80 | Supply and fix in repair for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407 |
| 81 | Demolition of concrete ( un reinforced ) in ground floors and paving n.exc 15 cm thk (below or above ground level) complete all as specified and directed. |
| 82 | M & L 75 mm thick Cement concrete type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair . |
| 83 | M/L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub basecomplete all as specified and directed. |
| 84 | M& L Chequared Cement Concrete Tiles (Glozy Finish) 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified. |
| 85 | Taking down carefully old/ damaged/unserviceable copper/ aluminium pointwiring (light, fan, socket or power) complete, (fittings such as switchs, ceiling roses, pendents, regulators sockets etc. to be measured seperately), removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified. |
| 86 | Taking down carefully fan any type complete deposited in MES E/M store complete all as specified. |
| 87 | M&L for consealed point wiring complete with 1.5 Sqmm two single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 V grade confirming to IS 694 drwan through PVC conduit of suitable size heavy grade ISI marked including necessary conduit accessories, sunken type pressed steel terminal boxes with plastic laminated sheet of approved shade 3mm thick including 1.5 mm PVC insulated FRLSH copper conductor as in continious earth wire for: |
| 88 | One light /fan/ call bell point controlled by one switch |
| 89 | One 5 pin socket outlet 5 Amps on independent board |
| 90 | One 5 pin socket outlet 5 Amps on same board |
| 91 | All as per item No 87 above but with 2.5 Sqmm two single core PVC insulated but unsheathed copper conductor FRLSH cable1100 V grade drwn through PVC conduit requirement including tees, junctions etcfixed on wall/ floor/ ceiling etc including 1.5 Sqmm PVC insulated but unsheathed multistranded copper conductor FRLSH cable as earth continuity wire including PVC/ Wooden/Modular metal type terminal box of suitable size with top cover for One Light/ Fan/6 Amps switch socket controlled by one way switch complete all as specified and directed. |
| 92 | All as per item No 3 above but with 4 sqmm multi stranded copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with FRLSH PVC conduit 4 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board complete all as specified and directed. |
| 93 | Supply & Fix of switch 1 way, 6 Amps, 1 module complete all as specified and directed. |
| 94 | Supply & Fix of switch socket 5 pin 6 Amps, 3 module complete all as specified and directed. |
| 95 | Supply & Fix of switch socket 5 pin 6/16 Amps, combination type 3 module complete all as specified and directed. |
| 96 | Supply & Fix of Fan regulator 60 Watt 2 module complete all as specified and directed. |
| 97 | Supply & Fix of cover plate frame, 1/2 module complete all as specified and directed. |
| 98 | Supply & Fix cover plate frame, 3 module complete all as specified and directed. |
| 99 | Supply & Fix 4 module complete complete all as specified and directed. |
| 100 | Supply & Fix cover plate frame, 6 module complete all as specified and directed. |
| 101 | Supply & Fix cover plate frame, 8/12 module complete all as specified and directed. |
| 102 | M & L for Modular Bell, Ding Dong AC. 230 volts, single pole fitting complete. |
| 103 | M & L 3 terminals Ceiling rose, AC, 230 V, PVC/ polycarbonatecomplete all as specified. |
| 104 | Supply & fix in replacement of Modular USB socket of 2 module complete with input 250V & output is 12/24 V DC with two USB cord arrangement complete all as specified. |
| 105 | S & F submain wiring with cable insulated single core multistranded copper conductor FRLSH cable 1100 volts 2x 4.0 sqmm drawn through & PVC conduit including all accessories such as tee,bend,elbow & sockest etc of suitable size alongwith 4 sqmm copper conductor cable for earth continuity complete all as specified and directed. (Note : 2 runs of 4.0 sqmm cable, one run of 4.0 sqmm cable and one run PVC conduit will be measured as one RM). |
| 106 | S & F submain wiring with cable insulated single core multistranded copper conductor FRLSH cable 1100 volts 2x 6.0 sqmm drawn through & PVC conduit including all accessories such as tee,bend,elbow & sockest etc of suitable size alongwith 6 sqmm copper conductor cable for earth continuity complete all as specified and directed. (Note : 2 runs of 6.0 sqmm cable, one run of 6.0 sqmm cable and one run PVC conduit will be measured as one RM). |
| 107 | S & F of 8 way VTPN DB made of CRCA sheet, RAL 9003, powder coated for IK-09 double door, IP-54 glazed door, confirms to IS-8623-1, IEC 61439-1&3, 415 v with 200 amps rated bus bar , ready to use DB insulated phase busbar, neutral bar's with shroud's, earth bar, sticking saddles, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates & circuit identification label with provision for FP, MCB/ Isolator/RCCB/RCBO as incomer & SP MCB's as outgoing complete all as specified and directed. |
| 108 | MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 12 way complete all as specified and directed. |
| 109 | Supply & fixing in replacement of MCB TPN (3P+N), 415 Volts, 50HZ, 10KA Brecking capacity, C characteristics of capacity 63 Amp complete all as specified. |
| 110 | Supply & fixing in replacement of MCB SP 240 Volts, AC, 50 HZ, 10 KA, C/D Charactristic of capacity 6-32 Amp complete all as specified. |
| 111 | Supply & fixing in replacement of MCB DP 240 Volts, AC, 50 HZ, 10 KA, C/D Charactristic of capacity 40 Amp complete all as specified. |
| 112 | Supply & fixing surface mounting general purpose aluminium battens with best in class Luminaire Efficacy of 20W. These Extruded Aluminium housing battens are equipped with high specifications CISPR 15 compliant Electronics driver and Milky white, special polycarbonate diffuser, for glare free efficient light distribution. THD: <10% complete all as specified and directed. |
| 113 | M & L for Earthing complete with Galvanised steel earth plate electrode 60 cmx 60 cm x 6.3 mm thick buried bellow ground level connected to galvanised earth lead directely in ground earth pit not less than 3.20 mtr deep wire 4.0 mm dia by means of bolts , nuts, check nuts, and washer of galvanisediron or steel all as shown in electrical plate No-3 SSR Part-1 of 2009 connecting to earthing test point all as specified and directed ,including necessary excavation and earth work in any type of soil ,concre pit CI frame and cover with locking arrangement all as specified and directed by Engr- In- charge. Note: Rate quoted deemed to be including excavation by compressor M/C for Soft disintegrated rock to required depth |
| 114 | Supply and fixing ceiling fans decorative type with remote control complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). |
| 115 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm with complete accessores. |
| 116 | Supply and fix single pole and sheet metal enclosure with three pin socket and plug top and 20 amp single pole MCB complete all as specified and directed . |
| 117 | Supply ,laying ,commossionong,testing in repair UG cable 10 Sq mm x 4 core ,XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with stranded aluminum conducter all as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender