Tender For Special Repair Of Building Of Fire Station No 4 In No 1 Amn Area Of 29 Fad Dehu Road
Tender Value
29.36 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
10 days left
EMD
58720
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Building Of Fire Station No 4 In No 1 Amn Area Of 29 Fad Dehu Road
BOQ
| Sl. No. | Item Description |
| 1 | S& F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 2 | S&F in repair for 15 mm bore long body bib tap, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 3 | S&F in repair for 15 mm bore Stop valves/, cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 4 | S&F in repair for 15 mm bore Stop valves/angle valve, fancy type chromium plated cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 5 | S&F in repair for 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed. |
| 6 | Supply only in repair Grating doom 125mm dia of stainless steel with hole/without hole complete all as specified and directed. |
| 7 | S& F in repair for 20mm Ball valves, high pressures of PTMT, with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms) complete all as specified and directed. |
| 8 | Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed. |
| 9 | Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed. |
| 10 | S & F 15 mm bore GI pipe conceled medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 11 | S & F 20 mm bore GI pipe conceled medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 12 | S&F 1000 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 1000 Ltr capacity complete all as specified and directed. |
| 13 | S & F Vitreous China wash basin white, flat back, size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand, with and including 32mm waste fitting brass, chromium plated with long screwed shank and fly-nut, flange end bedded in red lead cement, brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore, including necessary packing, union and cap and fixed in repairs.Note:wash basin shall conform to IS 2556(part-4)-2004. |
| 14 | S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs. |
| 15 | Supply only in repair soap dish, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed. |
| 16 | S&F PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets). |
| 17 | M&L for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with and including 5 litres Cast iron automatic flushing cistern, including brackets, flush pipe, CP urinal spreader, grating union , union and cap and discharge pipe; fixed in repairs. |
| 18 | Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed. |
| 19 | M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified |
| 20 | M & L for Pre - cast cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) block masonary with solid blocks built in cement mortar 1:6 all as specified and as directed. |
| 21 | Taking down cement plaster on brick walls/ceiling or concrete surface including raking out joints hacking for key and scrubbing down with water etc. complete all as specified & directed by Engineer-in-Charge. |
| 22 | M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete walls finished even and smooth w/o using extra cement. |
| 23 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement. |
| 24 | M&L for rendering 5 mm thick in CM 1:3 on fair faces of ceiling work or conrete surfaces finishing the surfaces even and smooth without using extra cement. |
| 25 | M&L for two coats of oil bound distemper on new plastered surfaces of walls including 1mm thick wall putty on plastered wall surface incl prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge. |
| 26 | M&L for two coats of Cement based paint on new plastered surfaces of walls incl prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge. |
| 27 | M&L for two coats of oil bound distemper on new plastered surfaces of ceiling incl prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge. |
| 28 | Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site n exc. 1.5 Sqm each complete all as specified and as directed |
| 29 | Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n exc 4 Sqm each complete all as specified and as directed |
| 30 | S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm |
| 31 | S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 165 X 60mm |
| 32 | M/L for PCC 1:2:4 type B1 in door frame filling all as specified and directed. |
| 33 | Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing. The door frame shall be tied to wall using 75/100mm long screw as directed |
| 34 | Supply and fixing Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing. |
| 35 | S&F 30mm mm thick flush shutters, solid core construction, with block board core and plywood face panels.all as per spd complete all as specified and as directed. |
| 36 | S & F Glazed skeleton shutter 30mm thk IInd class HW open rebated and prepared to receive glass, gauze etc (without shash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze etc ; size of members of shutters as specified in SSR Pt-I, section 8 clause 8.24 (a) |
| 37 | S & F galvanised mild steel wore cloth, 0.63mm nominal dia of wire and avg width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples |
| 38 | S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed |
| 39 | S& F for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed |
| 40 | S & F in repair for stainless steel curtain rod 25 mm dia complete with bracket and side knobs all as specified and directed. |
| 41 | S & F for 3mm thick sheet glass ordinary quality, in square or reqd shape n exc 0.50 Sqm each pane including oil putty complete all as specified and directed. |
| 42 | S & F for 150mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. . |
| 43 | S&F for 250mm long sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 44 | M&L preparation of new wood surfaces and wood based materials of any description over 10cm width or girth and applying two coat synthetic enamel paint over one coat primer complete all as specified and directed(Bldg upto & including 3 storey) |
| 45 | M&L preparation of new steel & iron surfaces of any description over 10cm width or girth and applying two coat synthetic enamel paint over one coat of red oxide complete all as specified and directed (Bldg upto & including 3 storey) |
| 46 | Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and directed. |
| 47 | S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifed. |
| 48 | All as per item No. 47 above but plain sheet fix in valley gutter / ridge/ View cutter etc.complete all as specified and as directed. |
| 49 | Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level) |
| 50 | Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed. |
| 51 | M&L for 100 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) in plinth protections etc finishing the surface without extra cement even and smooth complete all as specified and directed. |
| 52 | M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base of floor/ hard standing complete all as specified and directed. |
| 53 | M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block (glossy finish) any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified. |
| 54 | M& L Chequered Cement Concrete Tiles (glossy finish ) 20 CM x 20 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified. |
| 55 | M&L for vitrified ceramic light coloured tiles 8 to 10mmthk (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete. complete all as specified and directed. |
| 56 | All as per item No 55 above but on skirtings incl 10 mm th rendering in CM (1:3) complete. |
| 57 | M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx300x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:3 all as direced. |
| 58 | M & L for cement concrete work in pavement/hard standing of flexural strength 40 Kg/per sqcm in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed. |
| 59 | M & L Finishing surface of concrete roads, pavements etc by brooming complete all as specified and directed. |
| 60 | M & L for forming 10 mm thick construction joints 30 mm deep, filled with sealing compound grade 'A' complete all as specified and directed. |
| 61 | M & L for forming 12 mm thick expansion joints 150 mm deep, filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'A' complete all as specified and directed. |
| 62 | M & L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed. |
| 63 | Dismantling of cast iron or reinforced concrete/ PVC pipes size 75/100 mm size, jointed in cement mortar and taking out of trenches, if required complete all as specified and directe |
| 64 | M&L for 75 mm dia PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directe |
| 65 | All as per Srl item No.64.00 above but fixed to walls |
| 66 | All as per Srl item No.64.00 above but 110 mm dia fixed to walls |
| 67 | M&L for 65 mm dia PVC (SWR) bends any radius complete all as specified and directed |
| 68 | All as per Srl item No.64.00 above but 110 mm dia |
| 69 | M&L for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 70 | M&L for 75 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed |
| 71 | Dismantling MS works of any Desc. Not otherwise provided for |
| 72 | S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc and fixing complet Fe-410-w (gdeE-250 quality-A) |
| 73 | M & L for excavation in trenches n exc 1.5M deep & exc. 1.5M wide and getting out in soft/loose soil |
| 74 | Demolition of cement concrete (reinforced) as in manholes cover. |
| 75 | Demolition & breaking up drain pipe (salt glazed , AC or reinforced concrete) set in cement mortar for 100 mm dia pipes. |
| 76 | Ditto- all as item No. 75 above but for internal dia of pipe 150mm. |
| 77 | M&L for reinforced cement concrete pipes class NP-3 , laid in trenches & jointed complete with collars, dia of pipe 100 mm . |
| 78 | All as item No. 77 above but for 150 mm internal dia of pipe. |
| 79 | M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 100 mm bore RCC pipe. |
| 80 | All as item No. 79 above but for 150 mm dia RCC pipe. |
| 81 | M&L for cutting into existing manholes for connecting new drains making good to pipe & rendering, cutting. Out existing benching for & forming branch channel in cement concrete 1:2:4 type B-1 smooth finishing & reforming benchine as required for bore of pipe 100 mm. |
| 82 | M&L for 75 mm thick precast Cement concrete cover slabs 1:2:4 Type B-1 set and jointed in CM 1:6Note:- Reinforcement shall be measured and paid separately. |
| 83 | M&L for mild steel deformed TMT bars 6 to 8mm dia cut to length, bent to shape required incl cranking, bending, hooking ends & binding with & incl mild steel wire (annealed) not less than 0.9 mm dia. |
| 84 | Returning filling in including levelling , watering and well ramming in layers n exc 25 cm thick in soil. |
| 85 | Removal of surplus soil to a distance n exc. 1.5 M & depositing where directed at a level n exc. 1.5 M above starting point. |
| 86 | S& F in repair stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified.(Note : Stainless steel sink to be provided in lieu of ground cemented washing area, hence no credit) |
| 87 | S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insulation 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified |
| 88 | M & L for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like (1:2:4 Type B-1 (12.5mm graded aggregate) ) |
| 89 | M & L for taking out old water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge (a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer. (b) On the dried roof surface, apply one coat of bituminous primer @ 100 Gm/ Sqm as per manufacturers instruction.(c) On this primed surface, the approved APP modified bituminous membrane with non woven polyester mat asreinforcement weighing not less than 3.5 Kg/ Sqm laid by torch application metho and top surface shall be applied with bituminous aluminium paint.(d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction. Note:-Obtain material through out low laying Area |
| 90 | Taking down carefully old/ damaged/unserviceable copper/ aluminium pointwiring (light, fan, socket or power) complete, (fittings such as switchs, ceiling roses, pendents, regulators sockets etc. to be measured seperately), removing materials to store for keeping insafe custody for ruse at site and making good disturbed surfaces of wall, floors etc. comlete all as specified. |
| 91 | Taking down carefully fan any type complete deposited in MES E/M store complete all as specified. |
| 92 | M & L Point wiring complete with 1.5 Sqmm two single core PVC insulated but unsheathed copper conductor FRLSH cable 650/ 1100 V grade drwn through concealed PVC conduit thickness not less than 1.8 mm of suitable size as per site requirement including tees, junctions etc fixed on wall/ floor/ ceiling etc including 1.5 Sqmm PVC insulated but unsheathed multistranded copper conductor FRLSH cable as earth continuity wire including sunken type terminal box of suitable size with top cover for One Light/ Fan/6 Amps switch socket/ Bell controlled by one way switch complete all as specified |
| 93 | All as per items No 92 but on same board. |
| 94 | All as per items No 92 but on independent board. |
| 95 | Point wiring complete with 2.5 Sqmm two single core PVC insulated but unsheathed copper conductor FRLSH cable 1100 V grade drwn through concealed PVC conduit thickness not less than 1.8 mm of suitable size as per site requirement including tees, junctions etcfixed on wall/ floor/ ceiling etc including 1.5 Sqmm PVC insulated but unsheathed multistranded copper conductor FRLSH cable as earth continuity wire including PVC/ Wooden/Modular metal type terminal box of suitable size with top cover for One Light/ Fan/6 Amps switch socket controlled by one way switch complete all as specified |
| 96 | Supply & Fix of switch 1 way, 6 Amps, 1 modue complete all as specified |
| 97 | Supply & Fix of Bell push switch 1 way, 6 Amps, 2 modue complete all as specified. |
| 98 | Supply & Fix of switch socket 5 pin 6 Amps, 2 modue complete all as specified. |
| 99 | Supply & Fix of switch socket 5 pin 6/16 Amps, combination type 3 modue complete all as specified. |
| 100 | Supply & Fix of Fan regulator 60 Watt 2 module complete all as specified. |
| 101 | Supply & Fix of cover plate frame, 1/2 module complete all as specified. |
| 102 | Supply & Fix cover plate frame, 3 module complete all as specified. |
| 103 | Supply & Fix 4 module complete all as specified. |
| 104 | Supply & Fix cover plate frame, 6 module complete all as specified. |
| 105 | Supply & Fix cover plate frame, 8/12 module complete all as specified. |
| 106 | S & F submain wiring with cable insulated single core multistranded copper conductor FRLSH cable 1100 volts 2x 6.0 sqmm drawn through & incl in concealed PVC conduit including all accessories such as tee,bend,elbow & sockest etc of suitable size alongwith 6 sqmm copper conductor cable for earth continuity complete all as specified and directed. (Note : 2 runs of 6.0 sqmm cable, one run of 6.0 sqmm cable and one run of PVC conduit will be measured as one RM). |
| 107 | S & F submain wiring with cable insulated single core multistranded copper conductor FRLSH cable 1100 volts 2x 4.0 sqmm drawn through & incl in concealed PVC conduit including all accessories such as tee,bend,elbow & sockest etc of suitable size alongwith 4 sqmm copper conductor cable for earth continuity complete all as specified and directed. (Note : 2 runs of 4.0 sqmm cable, one run of 4.0 sqmm cable and one run of PVC conduit will be measured as one RM). |
| 108 | S & F of 8 way TPN DB made of CRCA sheet, RAL 9003, powder coated for IK-09 double door, IP-54 glazed door, confirms to IS-8623-1, IEC 61439-1&3, 415 v with 200 amps rated bus bar , ready to use DB insulated phase busbar, neutral bar's with shroud's, earth bar, sticking saddles, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates & circuit identification label with provision for FP, MCB/ Isolator/RCCB/RCBO as incomer & SP MCB's as outgoing all as specified. |
| 109 | MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 8 way |
| 110 | Supply & fixing in replacement of MCB TPN (3P+N), 415 Volts, 50HZ, 10KA Brecking capacity, C characteristics of capacity 63 Amp complete all as specified. |
| 111 | Supply & fixing in replacement of MCB SP 240 Volts, AC, 50 HZ, 10 KA, C/D Charactristic of capacity 6-32 Amp complete all as specified. |
| 112 | Supply & fixing in replacement of MCB DP 240 Volts, AC, 50 HZ, 10 KA, C/D Charactristic of capacity 40 Amp complete all as specified. |
| 113 | Supply and fixing LED Surface mounting General Purpose aluminium battens 18/20 W,4 feet with best in class Luminaire Efficacy. These Extruded Aluminium housing battens are equipped with high specifications CISPR 15 compliant Electronics driver and Milky white, special polycarbonate diffuser, for glare free efficient light distribution. THD: <10% |
| 114 | Supply & fixing 180x180 MM feet ceiling light of 18/20 W recessed mounted pressure die cast aluminium luminaire in powder coated white finish in square profile with optimized heat sink for efficient heat dissipation and independent electronic driver complete all as specified and directed. |
| 115 | M & L for Earthing complete with Galvanised steel earth plate electrode 60 cmx 60 cm x 6.3 mm thick buried bellow ground level connected to galvanised earth lead directely in ground earth pit not less than 3.20 mtr deep wire 4.0 mm dia by means of bolts , nuts, check nuts, and washer of galvanisediron or steel all as shown in electrical plate No-3 SSR Part-1 of 2009 connecting to earthing test point all as specified and directed ,including necessary excavation and earth work in any type of soil ,concre pit CI frame and cover with locking arrangement all as specified and directed by Engr- In- charge. |
| 116 | M & L for DWC pipe of pressure rating 6 kgf / cm2 fixed/ laid in complete to walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :- |
| 117 | 32 mm dia |
| 118 | S & Laying in repair/ replacement cable XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with strandad aluminum conducter of following sizes:- |
| 119 | 25 Sqmm x 4 Core |
| 120 | 16 Sqmm x 4 Core |
| 121 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :- |
| 122 | Soft / loose soil |
| 123 | Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm all as specified and directed. |
| 124 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge. |
| 125 | M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Enger -in- charge. |
| 126 | Supply and fixing ceiling fans decorative type with three blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). |
| 127 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm with complete accessores. |
| 128 | M & L for cutting existing GI tubing of size 20 mmfor alterations or additions (Each cut measured) |
| 129 | Supply and lay in galvanized tubes, medium grade(B class) of size 20 mm including all fittings such as bends, tees, elbows all as specified and directed by Engr-In-charge. |
| 130 | Supply and installed outdoor main control box pillar box cannopy type with IP-55 protection,fabricated with 3.15 mm sheet of size 650mm x 600mm x275mm with 40mm angle iron fram 300 mm from ground leave, suitable for installed arrangement 125 Amps MCCB as incommer,out going 63-02 Nos with busbar made with 30mmx6mm aluminium strip on distribution board having front opening with proper locking arrangement size of the panel 600mm width,650mm hight and 275 mm width, complete all as specified and directed. Note: (a) aluminium busbar rate inclueded |
| 131 | Supply and fixing wall mounting fan complete three blades ,adjustable upward and downward,oscillation ,400 mm sweep with guard, 5.00 BEE star rated with brushless direct current motor 100% copper motor complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender