Defence Statutory Bodies & Commissions/Committees Closing in 9 days TDR #58096354

Tender For Repair To Fencing, Drain & Paved Area In Otm Accn In Aor Of Age Br-Ii Under Ge Hisar At Hisar Mil Station

Issued by Statutory Bodies & Commissions/Committees · Hisar, Haryana
Tender Value
30 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
9 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair To Fencing, Drain & Paved Area In Otm Accn In Aor Of Age Br-Ii Under Ge Hisar At Hisar Mil Station

BOQ

Name of Work:- REPAIR TO FENCING, DRAIN & PAVED AREA IN OTM ACCN IN AOR of AGE BR-II UNDER GE HISAR AT HISAR MIL STATION
Sl. No. Item Description
1Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work,masonary etc. any section, including taking out embedded portion andmaking good disturbed ground complete all as specified and directed.
2Dismantling fencing wire mesh, any type complete all as specified and directed.
3Excavation in post holes (or similar) each n.exc 0.5 cum, getting out in any type of soil complete all as specified and directed.
4M&L cement concrete in foundation filling and mass concrete 1:3:6 type B-2(using 20mm graded Agg) complete all as specified and directed.
5M&L for hand rails, half round or other stock section or core for wooden hand rail straight portion and curved or ramped portions of hand rails to required shape or figure (curved, ramped or scroll portions only measured), drilled and countersunk for balusters, nosing to steps incl embedding in concrete and screwing etc, wind ties for roof incl securing bolts: post and struts in fencing incl cutting topes to shape as directed, drilling holes, notching for wire etc, flat iron fillets incl all necessary drilling bolting or riveting etc, and similar work conf to Fe 290 grade E-165 complete all as specified and directed.
6Supply only chain link fencing of oblong wire mesh size 100x100mm with weight n.exc 4kg/sqm complete all as specified and directed.
7Fixing only chain link fencing incl line wires, an mesh, size and type to any type of standards, rails, strain in bolts etc incl provision of binding wire andd fixing with MS angle iron fencing posts complete all as specified and directed.
8M&L for preparation of new steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a red oxide zinc chrome primer complete all as specified and directed.
9S&F in reapirs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts incl securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed(each line wire to be measured) complete all as specified and directed.
10Supply only 10mm MS round or square bars, as in horizontal line wire/bar in available lengths, complete all as specified and as directed.
11Dismantling floor, hearth or wall tiling/granite including cement mortar bedding (but not backing) removing, serviceable tiles to stone and rubbish off the premises all as specified and directed.
12Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified.
13Demolition of Brick work, stone/boulder or block masonry, built in cement mortar excluding ashlars facing dressed stone work and pre-cast concrete etc complete all as specified.
14M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) finishing surface even and smooth without using extra cemnt as in floor & Plinth protection complete all as specified and directed.
15M&L for 100mm thick Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone agg) as sub floor,sub base floor and paving etc,complete all as specified and directed.
16M&L for rubber moulded Machine pressed precast conctete interlocking paver block any shape and size with gray cement and pigment confirming to IS -15658-2006 of 60 mm thickness, M-35 Grade on 25mm thick sand cusion all included.
17M & L in repair for rubber moulded chequered cement concrete tiles 25cm x 25cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and pigments on screed bed or bedding layer of mortar 15 mm thick in cm 1:6 for laying floor finishes including demolition of old tiles complete all as specified and directed.
18M & L for Vitrified Ceramic heavy duty tiles 10-12 mm thick polished, area of each tiles n exc .36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to match over 15mm thick screed bed in CM 1:6 etc complete complete all as specified and directed.
19Ditto all as above but in skirtings/risers with 10 mm thick backing coat in CM (1:4).
20M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.
21M&L for 20mm thick granite ( of any type) slabs/Tiles laid in floors/treads over 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white cement with admixture of pigment to match the shade of granite all as specified and directed.
22M&L for 25 mm thick top layer of wearproof hardner granolithic concrete with 1:4:12 (metallic hardner:cement:6mm grit) including metalic hardner complete all as specified and directed.
23Taking down cement plaster of any description built in cement mortor complete all as specified and directed.
24M&L for 15mm thick rendering in CM 1:4 on stone / concrete block masonry surfaces other than fair faces of concrete / brick is to be finished even and smooth (without using extra lime or cement) complete all as specified.
25M&L for rendering 10mm thick on stone / concrete block masonry surfaces of any description in cement mortar (1:6) is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.
26M&L for preparation of newly plastered of wall surfaces and applying two coats of cement based paint over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified.
27M&L for preparation of newly plastered of wall surfaces and applying two coat of oil emulsion distemper over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58096354
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 30 Lakhs
LAST DATE 06-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair To Fencing, Drain & Paved Area In Otm Accn In Aor Of Age Br-Ii Under Ge Hisar At Hisar Mil Station
Basic Detail
Tender No GE(H)-40/2026-27
Bidding Type Tender
Location
City Hisar
State Haryana
Key Dates
Publish Date 16 Oct 2026
Submission Date 06 Nov 2026
Open Date 09 Nov 2026
Finance
Tender Value 30 Lakhs
Tender Fee 500
EMD 60000
Exemption Available
Document List
a0c5f0be-7e8d-4dc5-a10b-791483b67855.html
BOQ_891039.xls
TENDERGE40.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 06, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Nov 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

a0c5f0be-7e8d-4dc5-a10b-791483b67855.html

xls

BOQ_891039.xls

pdf

TENDERGE40.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender