Tender For special Repair To Bldg No P-105 (Or Md Accn) ,Provn Of Path From Bde Hq To Bde Mess And 01X Car And 03 X Two Wheeler Parking Shed At Mil Stn Dharamshala.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Nov 2026
20 days left
EMD
85000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P-105 (Or Md Accn) ,Provn Of Path From Bde Hq To Bde Mess And 01X Car And 03 X Two Wheeler Parking Shed At Mil Stn Dharamshala.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal all rubbish material complete all as specified and as directed. |
| 2 | Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided and removal of debris to out side Mil Stn, complete all as specified and directed. |
| 3 | Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quorns, arches, pillars etc but excluding ashlar facing dressed stone work complete all as specified and as directed. |
| 4 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc including removal of debris to out side Mil Stn, complete all as specified and directed. |
| 5 | Taking up or down steel tubing and connections of 15 mm bore, including cleaning and stacking safe custody for refixing, or removal to store.complete all as specified and as directed. |
| 6 | Taking up or down steel tubing and connections of 20 mm bore, including cleaning and stacking safe custody for refixing, or removal to store.complete all as specified and as directed. |
| 7 | Dismantling PVC water tank of capacity Exc 250 Litre and not Exceeding 500 Ltr,complete all as specified and as directed. |
| 8 | Taking down door shutter of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed. |
| 9 | Taking down chowkat with shutter n.exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 10 | Taking down chowkats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 11 | M&L 25 mm thick PCC 1:2:4, type B-0 using 12.5 mm graded crushed aggregates as in floor finish even and rough to receive topping layer complete all as specified and as directed. |
| 12 | M&L plain cement concrete (1:3:6) type C1 (20mm graded crushed stone aggregate), 75mm thick as in plinth protection courses laid in slope 1:20, top surface of concrete finished even and smooth without using extra cement, incl expansion joint 10mm thick filled with mastic filling comprising of 01 part of heated blown bitumen 85/25 and 03 parts of sand incl demolition of existing cement concrete incl disposal of demolition material upto MD land complete all as specified and as directed. |
| 13 | M & L for providing precast cement concrete type A1 1:1.5:3 (using 20mm graded crushed stone aggregate) in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and as directed. |
| 14 | S & F Mild Steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to, complete all as specified and as directed. |
| 15 | All as per item no14 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 16 | M&L for cement concrete PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges incl demolition and necessary formwork and removal all rubbish material complete all as specified and directed. |
| 17 | M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:6, complete all as specified and directed. |
| 18 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile, incl 15 mm screed bed in CM 1:6, complete all as specified and directed. |
| 19 | M&L non-skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, incl 15 mm screed bed in CM 1:6, complete all as specified and directed. |
| 20 | M&L non-skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, incl rendering 10 mm thick in cement mortar 1:3 on fair faces of brick or concrete surfaces finished even and rough for receiving wall tiles/dado complete all as specified and directed. |
| 21 | M&L for machine cut Kota stone slab flooring 16-18 mm thick over cement screed bed laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including and polishing complete over and including 20 mm screed in cement mortar 1:4 complete all as specified and directed. |
| 22 | M&L for machine cut Kota stone slab flooring 16-18 mm thick riser of step, skirting, dado and piller laid over and including 10 mm thick randering in 1:3 on fair faces of brick or concrete surfaces finishing rough for receiving wall tiles complete all as specified and directed. |
| 23 | M & L 16-18 mm thick black Granite work (table rubbed) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 24 | M&L for providing edge moulding to 16-18mm thick granite/kota stone of counters vanities, steps etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed. |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises M & L for coloured glazed ceramic tiles in vertical surface 250x 250x 7mm/ 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tile incl rendering 10 mm thick in cement mortar 1:3 on fair faces of brick or concrete surfaces finished even und rough for receiving wall tiles/dado complete all as specified and as directed. |
| 26 | M&L for rendering 5mm thick on concrete surfaces of ceiling in CM 1:3, finished even and smooth without using extra cement incl taking down plaster on cement or cement lime plaster,any description, scrubbing down with water, and removal of debris to out side Mil Stn, complete all as specified and directed. |
| 27 | M&L for rendering or plastering work 15mm thick in CM 1:3 in fascia/edges/ceiling and roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finished even and smooth without using extra cement and removal of debris to out side Mil Stn, complete all as specified and directed. |
| 28 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement incl taking down plaster on cement or cement lime plaster,any description, including raking out joints, hacking for key, scrubbing down with water and removal of debris to out side Mil Stn, complete all as specified and directed. |
| 29 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement, complete all as specified and directed. |
| 30 | M&L for 15mm th rendering in CM 1:4 on fair faces of concrete and brick surfaces, mixed with WPC as per manufacture instructions and finished even and smooth without using extra cement incl taking down plaster on cement or cement lime plaster,any description, including raking out joints, hacking for key, scrubbing down with water and removal of debris to out side Mil Stn, complete all as specified and directed. |
| 31 | Supply of integral water proofing compound |
| 32 | S&F pressed steel frames of 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfast incl PCC 1:3:6 type C-0 using 12.5mm graded stone agg for back filling of frame, etc. complete all as specified and directed. |
| 33 | S&F pressed steel frames of 125x60mm for doors/cupboard with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfas incl PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate for back filling of frame, etc. complete all as specified and directed. |
| 34 | Making good dismantled portion for inserting hold fasts in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed. Please Enable Macros to View BoQ information |
| 35 | Making good dismantled portion for inserting hold fasts in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender