Tender For Provision Of External Lighting Along The Sea Front At installation Dronacharya Under Ge Fort Kochi
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
3 days left
EMD
19000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of External Lighting Along The Sea Front At installation Dronacharya Under Ge Fort Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Supply, laying and testing cable Weather proof sheathed copper conductor round flexible industrial 3 core cable of size 1.5 Sqmm cable complete all as specified and as directed. |
| 2 | Supply laying and testing cable XLPE insulated screened PVC bedded galvanised iron strip or wire armoured electric cables (heavy duty) 1100 volts grade with standards Al. conductor of size 16 Sqmm 4 core complete all as specified and as directed. |
| 3 | Excavation in trenches, not exc 1.5 m wide and not exec 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in hard and dense soil complete, all as specified and as directed. |
| 4 | Material and labour for removing excavated soil to a distance not exceeding 50 m and not exceeding 1.5 m above the starting point, and depositing where directed complete, all as specified and as directed. |
| 5 | Riddled Sand Cushioning (dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 cm Spread thickness (8 cm in depth before laying the Cable and 15 cm in depth after laying the Cable) and above. Sand shall be obtained through digging at site 500 mt distance and transporting to site for punned use to sand cushioning up to 18 cm thickness, complete all as specified and as directed. |
| 6 | Supply and lay sub class \\"B” burnt bricks, as in cable protection, laid length of brick perpendicular to length of cable complete, all as specified and as directed. |
| 7 | Material and labour for Returning and filling in of soil including spreading levelling, watering and ramming in layers not exceeding 25 cm complete all as specified and as directed. |
| 8 | Supply and fixing, testing of Heritage Antique celesta design street light, IP65, Decorative poles of 3.5 mtr hight including powder coated poles with housings, bracket designed, made from CRCA/ GI poles with one Nos of LED Celetsa Luminaires 60 watts and including pole base foundation with anchoring 04 Nos long bolt, nut, washers all necessary arrangement complete all as specified and as directed. Make: - SHAKTI (SZPGCMX060-P) (01 NO LED Lights 60 W, 3.5 hight pole with designed arm bracket) or equivalent as approved by GE. |
| 9 | Supply and fixing SMC junction box size of 240x130x95 mm fixed on pole including provision of MCB TPN 20 Amps fixed on rail inside box with proper hinges locking arrangements with provision of clamping accessories complete including taking down old unserviceable item complete all as specified and as directed. |
| 10 | Material and labour for cement concrete 1:4:8 (using 40mm graded stone aggregate) in foundation, filling and mass concrete, etc. including use and waste of formwork as required/ordered, complete all as specified and as directed. |
| 11 | Material and labour for cement concrete 1:3:6 (using 20mm graded stone aggregate) in coping including Use and Waste of formwork as required/ordered, complete all as specified and as directed. |
| 12 | Supply and laying 50mm GI tubing light grade including all accessories for encasing cables for mechanical protection, laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall/floor or along poles or as street light poles or as street light mounting bracket with complete accessories such as bends /sockets/ reducers/ saddles including necessary threading/ drilling works complete all as specified and as directed. |
| 13 | Earthing complete with GI earth plate electrode 60cm x 60cm x 6.3mm thick buried in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate not less than 1.5 m below ground level connected to galvanised iron earth wire 4mm dia by means of bolts, nuts, check nuts, washers made out of galvanised iron steel all as shown in electrical plate No 3 of SSR Part I and earth wire protected by galvanised pipe light grade 15mm bore and connected to LT panel/ pole through test point including necessary earth work and excavation in any type of soil, GI light grade 15mm bore watering pipe with funnel and wire brush, PCC 1:2:4 type B1 chamber with 20mm thick RCC 1:2:4 type B1 , cover slab with 6mm dia MS bars at 100mm c/c both ways with MS hook 6mm dia etc and testing complete all as specified and as directed. |
| 14 | Supply, installation and commissioning including all necessary connection with required accessories and testing complete of factory made out door type (CPRI approved manufacturer) feeder pillar box single side opening of suitable size (65 cm length x 50 cm width and 50 cm thickness) cubical floor mounted type dust & vermin proof make out 3.15mm CRCA sheet with powder coated paint both side, outdoor type, aluminium bus bar of 100 Amps capacity 04 Nos rating for three phase and half of size for neutral mounted on hygroscopic insulator fixed and with fixing continuous welding using 25x4mm flat iron for internal arrangement on MS angle 40 x 40 x 5 mm size base frame fixed providing PCC foundation by means of 4 no MS bolt 16mm dia 100mm long with nuts and washer and necessary internal connection with PVC sheathed copper cable entry system for incoming and outgoing terminal feeder suitable aluminium bus bar arrangement screw bolts, nuts etc complete including locking arrangement including taking down of existing unserviceable one complete all as specified and as directed. |
| 15 | INCOMMING: -(i) MCCB, TPN 4 Pole 415 Volts, 50Hz,63 Amps, 25 kA, thermal magnetic release, with positive break indication with double break contacts with spreader and phase barrier - 01 Each (ii) Multi-function digital energy meter with RS 485 communication port with CTs(iii) Phase Indicator lamp assy RYB - 01 Set.OUTGOING: - (a) MCB TPN 4 pole 63 Amps, 415-volt, 50 Hz with thermal magnetic trip unit rating 40 Amps to 63 Amps) breaking capacity 25KA,100% Icu - 01 Nos. Make: - L&T/Schneider/Siemens/Legrand.(b) Automatic single dial timer switch with contractor, 230V AC quartz time base, with one selector switch for auto/manual selection Part No 15336, Type IH24h. Make- Schneider/L&T/Legrand – 01 No.(c) Auto/Manual switch - 01 Nos (Make - L&T). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender