Tender For special Repair To Vip Guest Room Of Bldg No-14 Of Offrs Mess 1Stc And Fountain, 02 X Gate And Connected Approach Path Near Oac Of 1 Mtr, 1 Stc Under Ge (West) Jabalpur
Tender Value
48.38 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
3 days left
EMD
96760
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Vip Guest Room Of Bldg No-14 Of Offrs Mess 1Stc And Fountain, 02 X Gate And Connected Approach Path Near Oac Of 1 Mtr, 1 Stc Under Ge (West) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm Each complete all as specified and directed. |
| 2 | Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area exc 1.5 Sqm but n-exc 4 Sqm Each complete all as specified and directed . |
| 3 | M & L for taking down cement of cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 6 | Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roofcoverings complete all as specified and directed . |
| 7 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 8 | Dismantling of Stone slabs and kota stone, Granite, Chequered tiles, Paver block, etc of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed. |
| 9 | S &F factory made single piece extruded solid PVC 3D wood grainmoulded door shutter 35mm (single rebate )made out of single piece extruded (SPE) solid PVC with partical baord with smooth 5 mm thick sheet of 20 mm width for style & (5 x 2) 10 mm thick 20 mm width for top & bottom rails,SPE 5 mm thick sheet both side laminated inserted as panel a as 2 mm thick per manufacturers specification and direction of Engineer-in-Charge |
| 10 | S&F Solid PVC Door frame of any sizes 95mm x50 mm made out of 5 mm colour PVC sheet reinforcement with MS square tube,supplying & fixing in opening as per specification & drawing complete all as specified and directed |
| 11 | S&F, extruded brass handles, fabricated type polished , fabricated type, anodised of size 150 mm complete all as specified and directed. |
| 12 | S&F Brass barrel tower bolts, barrel of extruded section , length of bolt 150 mm and fixed complete all as specified and directed |
| 13 | S&F,stainless steel , butt hinges of size 100 mm complete all as specified and directed. |
| 14 | S&F, floor door stopper of brass body and tongue with hard drawn steel spring , fixed in floor, overall length of cover plate 150mm complete all as specified and directed. |
| 15 | S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 16 | M&L for mild steel framed work such as grills,angles,flat iron, etc. with ends of bars, shouldered and/or riveted, or forged into spikes, holefastner , framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; cooler stands; frame work for water tanks also fastening and fixing similar work conforming to Fe-290 Gde E-165 including applying one shop coat of red oxide primer all as specified and directed by Engineer - in - Charge. etc |
| 17 | M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 18 | M&L for 15 mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed. |
| 19 | Material and labour for 15mm thick (in two layers 10mm+5mm) cemet plalster in CM 1:4 over brick wall / concrete surfaces using WPC, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. (Note-WPC will be measurd and paid seprately) |
| 20 | M&L for Cutting holes in brick walls in exc half brick and nexc one brick in cement in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed. |
| 21 | S&F, 5 mm thick, black frosted glass with nano coating fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed. |
| 22 | S&F, in repair, for 5 mm thick ACP Aluminium composite pannel board prelaminated both sides with decorative choice laminations and fixed with screws to aluminium frame work incl frame work complete all as specified and directed. |
| 23 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 24 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 25 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed. |
| 27 | M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm marble pattern with highlighter any colour on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed. |
| 28 | M&L, Non-skid digital coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of Each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete as specified and directed. |
| 29 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of Each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.. |
| 30 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of Each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting ,dados in vertical surfaces etc and including 10mm thick cement plaster 1:4 complete all as specified and directed. |
| 31 | M&L for vitrified double charge tiles 8 to 8.5 mm thick (Square or rectangular) area of Each tile 0.36 Sqm but not exceeding 1.44 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.. |
| 32 | M&L for vitrified double charge tiles 8 to 8.5 mm thick (Square or rectangular) area of Each tile 0.36 Sqm but not exceeding 1.44 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10mm thick cement plaster 1:4 complete all as specified and directed.all as specified and directed.. |
| 33 | M&L for 25 mm thick cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base to receive floor finishes complete all as specified and directed. |
| 34 | S&F , cast iron nahani trap, with chromium plated grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), dia of outlet 100mm complete all as specified and directed. |
| 35 | M&L, salt glazed stoneware gully traps square or round mounthed, type 'P' of size 125 x 100mm, setting and jointing with cement mortar (1:1) complete all as specified and directed. |
| 36 | S&F, in Grating, doom type , 100 mm size of CP complete all as specified and directed. |
| 37 | S&F, 32mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed. |
| 38 | Taking up or down steel tubing and connections complete all as specified and directed for the following bores of pipe:- |
| 39 | (b) 20mm |
| 40 | (c) 25mm |
| 41 | Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed. |
| 42 | Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed. |
| 43 | S&F 75mm bore, PVC (SWR) pipe, single socketed, in any length with rubber ring joints, fixed to walls including stack clamp complete all as specified and directed. |
| 44 | S&F 110mm bore, PVC (SWR) pipe, single socketed, in any length with rubber ring joints, fixed to walls including stack clamp complete all as specified and directed. |
| 45 | S&F PVC (SWR) plain bend any radius for 75 mm bore complete all as specified and directed. |
| 46 | S&F PVC (SWR) plain bend any radius for 110mm bore complete all as specified and directed. |
| 47 | S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed. |
| 48 | S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed. |
| 49 | S&F, Vent cowl 110mm bore PVC (SWR) complete all as specified and directed. |
| 50 | S&F, reducer 75mm bore PVC (SWR) complete all as specified and directed. |
| 51 | S&F, reducer 100mm bore PVC (SWR) complete all as specified and directed. |
| 52 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed. |
| 53 | M&L for 18-20 mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 54 | Rounding to edges of stone slabs one edge, such as window cills fixed with CM 1:4 and similar situations complete all as specified and directed. |
| 55 | Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture as in Kitchen cabinet and cupboard (withshelves and partitions) including necessary fitting & fixture as per manuacturer's instructions complete all as specified & directed. |
| 56 | S&F vitreous china rimiless wall hang WC with UF soft close seat cover , hinges accessories set as per Make Jaquar cat Part No ONS-WHT-10953BIUFSM (including fixing bolts but excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 57 | S&F single piece slim concelaed flusing cistern, with wall mounted frame installation kit and S type drain pipe connection set for wall hung WC with flush control plate) as per cat Make Jaquar part No JCS WHT2400FS and control plate JCP CHR 852415 complete all as specified and directed. |
| 58 | S&F FNS-WHT-40801 Wall Hung Basin with Fixing Accessories,Size: 620x480x185 mm As per Cat No. FNS WHT 40801 of make Jaquar (Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately. |
| 59 | S&F vitreous china full Counter Top Basin, Size: 600x400x185 mm of make Jaquar Cat part No. SLS-WHT-6601 (Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.) |
| 60 | Supply & fixing 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed as per Make Jaquar cat Part No ALD-CHR-705L130 complete all as specified and directed. |
| 61 | S & F 450mm Long Braided Hoses with Two 15mm Nuts & Rubber Washers without Nipple of make jaquar Cat part No . ALD-CHR-805B (Suitable for Geysers) Complete all as specified and directed. |
| 62 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 63 | S&F 8mm dia brass, chromium plated health faucet (Hand shower) with 01 meter long flexible tube and wall hook. Make : Jaquar Cat No - ALD-CHR-573or equivalent as approved by GE, complete all as specified and directed. |
| 64 | S&F basin mixture single lever tall boy with 150 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of 15mm bore complete all as specified and directed. Make : Jaquar (Cat No. OPPCHR 15005BPM ) or equivalent as approved by GE. |
| 65 | S&F Angular stop valves, fancy type, chromium plated with long shank and cup, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore with flange Make Jaquar Cat part No OPP CHR 15053PM for geyser complete all as specified and directed. |
| 66 | S&F two way bib cock fancy type, chromium plated with high pressure, of 15mm bore with flange Make Jaquar Cat part No OPP CHR 15041PM for WC point complete all as specified and directed. |
| 67 | S&F , brass chromium plated single lever concealed diverter mixer 3 in 1 system with provision of both over head shower and hand shower with 115 mm long bend pipe connecting legs and wall flange (without hand and over head shower Make - Cat No. OPP-CHR-15079NKPM, ALDCHR 079 body of conceled diverter and bath tab spout cat part No SPJ CHR 15463PM of Jaquar complete all as specifed and directed. |
| 68 | S& F chromium plated shower rose 300mm x300mm size and 15mm dia with or with square shape single flow (high flow ) including fixing to pipe and union complete As per Cat No OHS 1639 and SHA-455L600 (shower arms ) of Make : Jaquar all as specified and directed |
| 69 | S&F , hand shower sizes 65x95mm rectangular shape singel flow with rubite cleaning system face plate stainless steel and ABS body in chrome finished ) with 1.5 meter long flexible tube with nut and premium wall braket for hand shower 35mm dia and 100mm long round shape complete all as specified and directed. Make : Jaquar (Code No. HSH 1729 , SHA 549D12 and SHA 555 ). |
| 70 | S&F, in repair, chromium plated, Toilet Roll Holder with Shelf complete all as specified and directed. As per ACN-CHR-1157 Make : Jaquar or equivalent as approved by GE from the makes mentioned in Appx 'C'. |
| 71 | S&F Soap dispenser automatic capacity 0.8 ltr material AISI aluminium/ABS (Absolute Butadin steren Jaquar Cat Part No SDR-BLC-DJ0160ASN specified and direcrted. |
| 72 | S&F tumbler holder as per Cat No ACN-CHR-1141N of Make Jaquar or equivalent Make as approved by GE from Appendix 'C'. |
| 73 | S&F Towel ring round with round flange complete . As per Cat No ACN-CHR-1121BN of Make Jaquar or equivalent Make as approved by GE from Appendix 'C'. |
| 74 | S&F CP, soap dish holder complete all as specified and directed. Make : Jaquar Cat No - ACN-CHR-1131N or equivalent as approved by GE. |
| 75 | S&F Corner Glass Shelf (with Bracket) complete all as specified and direcrted Make : Jaquar Cat part No. ACN-CHR-1173 |
| 76 | S&F, , brass, chromium plated tubular towel rack 20mm dia 60cm long between flanges Make : Jaquar Cat No ACN CHR 1181S or equivalent as specified and directed. |
| 77 | S&F in repair, 1000mm x 700 mm plain edge mirror of selected quality glass not less than 5.5mm thick, of approved make and moulded edges ,decorative borders as appfroved by engineer -in-charge mounted on wall with SS fancy type studes with ss screws complete all as specified and directed. |
| 78 | Taking down aluminuim window/steel window & ventilator frame of any description not exc 1.5Sqm Each complete all as specified and directed. |
| 79 | Demolition and breaking up drain pipes (slat glazed stoneware, AC or RCC) set in cement mortar for 150mm bore of pipe complete all as specified and directed. |
| 80 | M&L for 150mm bore, reinforced concrete pipes, class NP-2, laid and jointed complete with collars all as specified and directed. |
| 81 | M&L for cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested for 150mm bore of pipe complete all as specified and directed. |
| 82 | M&L for cement concrete (1:2:4), type B-1, using 20mm graded stone aggregate in window cills, lintel band, bed block, copings and the like including weathering, slightly rounded or chamfered angles and throating, Including necessary form work complete all as specified and directed. |
| 83 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed. |
| 84 | Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed. |
| 85 | Removing excavated material soils, not exc 50m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed. |
| 86 | Cutting chases, pinning in, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth on brick masonry wall complete all as specified and directed. |
| 87 | M&L for refixing of false ceiling any type complete as specified and directed. |
| 88 | S&F, in repair, jet spray with 1mtr (stainless steel), chromium plated tube for vitreous china water closet complete all as specified and directed. Make-Jaquar Essco(Cat No - ALE -547) or equivalent as approved by GE. |
| 89 | S&F, swivel mirror round As per Cat No CAN CHR -1195N of Make : Jaquar complete all as specified and directed. Complete all as specified and directed. |
| 90 | S&F,Double Arm Wall Mounted Reversible Plain/Magnifying (3X) Pivotal Mirror As per Cat No CAN CHR -1193N of Make : Jaquar complete all as specified and directed. |
| 91 | S&F Shower panel cat part no. SHP-SSF-ST8896 Shinny Shower Panel 1600X200mm With Chrome Plated In Stainless Steel Finish,Anti-finger print stainless steel body ,Movable ABS top shower Cascade shower ,2 Moveable ABS body massage jets ,Hand shower with flexible hose ,Brass Spout ,Thermostatic mixer with diverter, 40cm stainless steel braided hose, Minimum Water pressure required 2 bar complete all as specifed and directed. |
| 92 | S&F, Aluminium powder coated sections((minimum thickness of powder coating 50 micron) for doors/windows/ventilators with one or more rebates including joining cleat including locking arrangment for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including complete all as specified and directed. Note:- sheet glass, wire cloth shall be measured and paid seperately. Please Enable Macros to View BoQ information |
| 93 | S&F, Aluminium powder coated sections((minimum thickness of powder coating 50 micron) for doors/windows/ventilators with one or more rebates including joining cleat including locking arrangment for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including complete all as specified and directed. Note:- sheet glass, wire cloth shall be measured and paid seperately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender