Tender For Painting To Runway Pavement Dispersal, Taxi Track/Links, Chequerred Painting Etc And Certain Other Misc Works At (Af) Bhuj .
Tender Value
40 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
5 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Painting To Runway Pavement Dispersal, Taxi Track/Links, Chequerred Painting Etc And Certain Other Misc Works At (Af) Bhuj .
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old decorated surfaces of concrete pavement (both rigid ends of runway) and applying one coat of white wash complete all as specified and as directed by Engr-in-charge. |
| 2 | M & L for preparation of old concrete/bitumen surfaces on rigid / flexible portion of Runway/Taxi track /dispersal by brushing, washing, rubbing by gunny bags,cleaning with scrappers or scrapping papers, brooming & fanning over 10cm width or girth of any description and applying one coat of Acrylic water based road marking paint of any tint or colour (white/ Golden yellow etc.) on lines, dashes arrows, letters etc complete all as directed by Engr-in-Charge. |
| 3 | All as per item No 2 above but n exc 10 cm width or girth . |
| 4 | M&L for preparation of old concrete/bituminous surfaces on rigid/flexible portions of Runway/Taxi Track/Dispersal by brushing, washing, rubbing with gunny bags, cleaning with scrapers or scraping papers, brooming and fanning over 10 cm width or girth of any description, and applying one coat of approved quality acrylic water-based road marking paint by suitable road marking machine as approved by GE, of any approved tint or colour (white/golden yellow etc.), on lines, dashes, arrows, letters, symbols etc., including proper machine calibration, maintaining the specified line width and uniform thickness of paint film throughout the application, complete including all labour, materials, road marking machine, tools, plant and equipment and all incidental operations as directed by the Engineer-in-Charge. |
| 5 | All as per item no 4 above but n exc 10 cm in width or girth |
| 6 | M & L for preparation of old painted surfaces of any description on wall/AC sheet/CGI sheet/Steel surfaces exceeding 10 cm in girth or width and applying one coat of synthetic enamel paint of any tint to match with existing surfaces as directed. |
| 7 | M&L for removal of existing paint over dispersal/Taxi Track by using water blasting/sand blasting cum vacuuming system on pavement surface with appropriate water pressure & collection of debris/FOD removal in the process without damage to pavement surface complete all as specified and directed by Engineer-in-charge. |
| 8 | M&L for cutting of grass manually and removal of materials/debris obtained from cutting and cleaning of both sides of runway, PTT near DTGM board, Links, taxi tracks and other airfield areas, including collection, removal and disposal of grass, weeds and other unwanted materials, complete in all respects and as specified and directed by the Engineer-in-ChargeNotes:- 1. The Contractor shall arrange and deploy a minimum of 04 Nos. of labourers at site daily from 0900 hrs to 1700 hrs, including a 30-minute lunch break, for execution of the work . Additional labours shall also be made available as and when required by the Engineer-in-Charge/User for urgent/operational requirements.2. The Department shall have the right to stop, suspend or restrict the work at any time due to security requirements, operational commitments, airfield movement or any other exigency, as considered necessary by the competent authority. The Contractor shall comply with such directions without any claim on this account.3. The Contractor shall provide all necessary tools, implements, equipment, personal protective equipment (PPE) and other resources required for execution of the work.4. The Contractor shall ensure that the work is carried out without obstructing or adversely affecting airfield operations, aircraft movement or safety requirements, and shall immediately remove all cut grass, debris and other materials generated during the work from the operational area. |
| 9 | M&L for ploughing of soft ground arrester area in the pattern prescribed by the Engineer-in-Charge, including deployment of tractor fitted with Jungle Jim/plougher, complete with driver, for ploughing of the soft ground arrester area and cutting of grass around runway and taxi tracks, all as directed by the Engineer-in-Charge.Notes:- 1 Payment shall be made for each hour or part thereof for which the tractor is actually deployed and the work is executed at site. A proper log book shall be maintained by the Contractor and duly signed by the user/representative, JE/Engineer-in-Charge and Contractor. The log book shall be kept on record with the Engineer-in-Charge and produced for verification whenever desired by the GE. Stationery required for maintaining the log book shall be provided by the Contractor. 2. In case of urgent requirement by the User, the Engineer-in-Charge may direct to contractor for deployment of additional tractors fitted with Jungle Jim/plougher, complete with driver, for execution of the work. The Contractor shall arrange and provide such additional tractors with Jungle Jim/plougher and driver as and when directed by the Engineer-in-Charge, without any additional claim other than payment for the actual hours of deployment as admissible. |
| 10 | Providing and operating bush cutter, complete with operator and suitable bush cutter blade, for cutting/scrapping of grass, shrubs, bushes and other vegetation around airfield lights, sign boards, drains and other airfield installations, including collection, loading, removal and disposal of the rubbish/material generated from the site to outside MoD land, complete in all respects and as specified and directed by the Engineer-in-Charge.Note:- 1. The bush cutter, operator, fuel, lubricants, blades and all other accessories/consumables,personal protective equipment (PPE) and other resources required for execution of the work shall be arranged and provided by the Contractor. 2. Additional bush cutters shall be deployed on User's requirement basis as and when directed by the Engineer-in-Charge. 3. All debris, cut grass, shrubs and other waste generated during execution shall be removed immediately from the airfield area and disposed of at a location upto 100 meter as directed by the Engineer-in-Charge. |
| 11 | S&F of double-sided Distance To Go Marker (DTGM) made of high-strength, UV-stabilized, weather-resistant engineering plastic/composite material of monolithic construction, suitable for extreme temperature variation, high wind, solar radiation, moisture and aircraft jet blast, each face approximately 1525 × 1220 mm (5'-0\\" × 4'-0\\"), complete with three frangible supporting legs of approximately 80 mm dia × 450 mm high, all as specified and directed by Engineer-in-Charge.The complete DTGM assembly including sign board, supports, fasteners and accessories shall be frangible and comply with applicable requirements of ICAO Annex 14, Vol. I and ICAO Doc 9157, Part 6 (Frangibility), with manufacturer's frangibility test certificate for the complete assembly. The DTGM shall be UV/weather resistant and capable of withstanding applicable wind and aircraft jet-blast conditions without compromising frangibility.Providing high-intensity prismatic retro-reflective sheeting of approved make, colour and grade, such as 3M™ Series 3930 or approved equivalent, with pressure-sensitive adhesive, including approved numerals, legends and symbols, complete.Note: provide 300 mm wide × 100 mm thick PCC (1:3:6) maintenance/erosion-protection pad, without rigidly restraining or encasing the frangible supports. |
| 12 | Supply and fixing internally illuminated dual side LED Sign Board of various sizes made out of 4.00 mm thick glare free poly carbonate sheet both side with 2.00 mm thick powder coated anodized Aluminum weather-proof sturdy frame to protected from environmental hazards .The board shall have frangible mounting legs with CI casting base with with name of vendor imprinted and necessary fixing of bolts in pcc foundation. Mechanical enclosure will have designed such a way that it can be opened for maintenance from the front without any special tools. The top edge should have heavy-duty hinges that open the front door towards the top side and IP65 or above sealed to provide protection against dust and rain ingress .Signage board shall have letters and symbol made by computerrized cutting of vinyl and pasting on the polycarbonate sheet from inside/outside of the both side of required colour as per ICAO. Light source shall be highly lumious longlife LED's strip of minimum size 700mm x 30 mm or as per size of board as direted by Engineer in charge.Electrical connection of LED clusters should be designed in such a way that failure of a particular cluster or a group of clusters only marginally affects the illumination of the Signage. LEDs need to have more than 50,000 hours of operational life and do not heat up and electronics should be capable for operation from -20 °C to +55 °C and signboard shall be uniformly internally illuminated with required LEDs to achieve uniform illumination level and operated on AGL circuit without flickering including suitable capacity /wattage electronic converters and 100W isolating transformer and pair of two pin secondary connector kit as directed & sign board shall comply as per ICAO Annex.14 Vol.I, ADM part 4 and ADM part 6 complete all as direted by EICNote - (i) All sign board shall be intergarted with MAFI RCMS System .(ii) Dimenssion of Letter and Number and colour as per ICAO . |
| 13 | 1.874 M x 0.800 M |
| 14 | S&F Airfield Sign Board comprising 4 mm thick Aluminium Composite Panel (ACP) with high-intensity retro-reflective coloured sheeting of approved make and colour, complete with letters, numerals, arrows and symbols as per approved airfield sign schedule, complete with stainless steel supporting frame, vertical support posts, frangible breakaway couplings, concrete foundation and all accessories, complete in all respects as specified and directed by the Engineer-in-Charge.The item shall include the following:(i) Sign Panel:- Providing and fixing 4 mm thick Aluminium Composite Panel (ACP) of size 450 mm × 100 mm, finished with high-intensity retro-reflective sheeting of approved colour and grade, complete with letters, numerals, arrows and symbols conforming to the approved airfield signage schedule.ii) Supporting Frame:- Providing and fabricating a rectangular supporting frame of overall size 450 mm × 100 mm, fabricated from AISI 304 Stainless Steel Square Hollow Section (SHS) 25 mm × 25 mm × 2.0 mm thick, complete with cleats, brackets, stiffeners, gusset plates and all necessary welding. The ACP panel shall be securely fixed to the frame using AISI 304 stainless steel countersunk screws/bolts, washers and suitable spacers. All welds shall be continuous, ground smooth, cleaned and passivated after fabrication. The completed frame shall be free from burrs, sharp edges and projections.(iii) Vertical Support Posts:- Providing 02 Nos. vertical support posts fabricated from AISI 304 Stainless Steel Square Hollow Section (SHS) 40 mm × 40 mm × 2.0 mm thick, complete with stainless steel brackets, cleats, nuts, bolts and washers. The posts shall project 300 mm above finished ground level and shall be embedded 500 mm below finished ground level.(iv) Frangible Breakaway Couplings:- Each vertical support post shall be provided with an engineered aviation-grade frangible (breakaway) coupling to be fixed at finished ground level. The coupling shall safely fail under aircraft impact, permitting the complete sign assembly to detach while leaving no hazardous rigid projection above ground level. The coupling shall be corrosion resistant, capable of withstanding operational wind loads during normal service, and shall permit quick replacement without disturbing the foundation.(v) Foundation:- Excavation for post holes in any type of soil and providing Plain Cement Concrete (PCC) 1:2:4 using 20 mm nominal size graded crushed stone aggregate of size 300x300x500mm including placing, compacting, curing, backfilling and disposal of surplus excavated material complete. The concrete foundation shall terminate below finished ground level to ensure that, after operation of the frangible coupling, no concrete or metallic projection remains above the surrounding ground surface. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender