Defence Statutory Bodies & Commissions/Committees Closing in 13 days TDR #58096319

Tender For Provn Of Hard Core (Pcc) Platform To Develop A Safe All Weather Volleyball Court, Provn Of Flood Light And Chain Link Fencing At Ancepta At Brichgunj Mil Stn, Under Ge Brichgunj, Sri Vijaya Puram

Issued by Statutory Bodies & Commissions/Committees · South Andamans, Andaman And Nicobar Islands
Tender Value
45.93 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
13 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of Hard Core (Pcc) Platform To Develop A Safe All Weather Volleyball Court, Provn Of Flood Light And Chain Link Fencing At Ancepta At Brichgunj Mil Stn, Under Ge Brichgunj, Sri Vijaya Puram

BOQ

Name of Work:- PROVN OF HARD CORE (PCC) PLATFORM TO DEVELOP A SAFE ALL WEATHER VOLLEYBALL COURT, PROVN OF FLOOD LIGHT AND CHAIN LINK FENCING AT ANCEPTA AT BRICHGUNJ MIL STN, UNDER GE BRICHGUNJ, SRI VIJAYA PURAM
Sl. No. Item Description
1Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in any type of soil soil, complete all as specified and as directed.
2M&L for Hardcore of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 7.5 cm thick watered and rolled/ rammed to a true surfce complete all as specified and as directed.
3M&L for Plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
4M&L for Precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 (using 20mm graded stone aggregates), exc. 10cm in width and set in cement mortar 1:6 complete all as specified and directed.
5M&L for Forming 20mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound,Grade ‘A’ Notes :(i) Joints to be provided using mechanical cutter. (ii) Joint filling to be done using masking tapes complete all as specified and as directed.
6M&L for 15mm thick rendering in two layers of 10mm thick backing coat inCM 1:6 and 5mm thick floating coat in CM 1:4 mixed with water proofing compound on all external wall surfaces/ RCC roof surface all as specified and as directed. (Note : Water proofing compound shall be measured and paid seperately)
7M& L for Preparation of new plastered surface or unplastered surfaces of walls and cornices and applying two coats of wheather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer over a coat of exterior grade wall care putty complete all as specified and as directed.
8Supply only Integral water proofing compound conforming to IS-2645 1975 complete all as specified and as directed.
9M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
10M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors finished with white cement and pigment including 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
11Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out in Hard/dense soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surplus soil to a distance not exceeding 50m and making good surfaces complete all as specified and as directed.
12M&L for Plain cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
13Supply only PVC coated (1mm thick) chain link fencing exc 2.00 but n.exc 3.50 kg per sqm with size of mesh 50 x 50 mm and thickness of wire n.exc 2.83 mm complete all as specified and as directed.
14Supply only 6mm dia wire PVC coated for support/ line wire to chain link fencing, complete all as specified and as directed.
15Fixing only PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires complete.(Supply of MS line wire and flat iron bolt & nuts measured and paid seperately) complete all as specified and as directed.
16S&F Mild steel angles, bars, flats etc as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
17S&F Mild steel bolts with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm long n.exc 10 cm long dia metre of neck exceeding 11 to 15 mm complete all as specified and as directed.
18M&L for Preparation new steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
19M&L Preparation new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and as directed.
20Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 10 sq mm 4 core complete all as specified and as directed.
21Excavation in trenches not exceeding 1.50m wide and n.exc 1.5m depth for foundation, laying of UG cables / pipeline etc or for shafts, wells, cesspits, manholes, pier holes etc not excluding 10 Sqm on plan in any type of soil and getting out , complete all as specified and as directed.
22Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm in any type of soil complete all as specified and as directed.
23Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
24Supply & laying of cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD confirming to IS 14930 -II and ISI Marked complete all specified and as directed.
25M&L for Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in Plain cement concrete 1:3:6, type C1, Pre cast RCC 1:2:4, type B1, cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including earth work excavation complete all as specified and as directed electrical plate No. 3 of SSR part - I
26Supply,erection,testing and commissioning of 6M high pole with following specifications and components:- Octogonal pole 3/0mm wall thickness, with bottom size 130mm diameter, top of the pole size 70 mm diameter and 3mm thick and base plate of size 200 X 200 X 12 mm.The pole shaft shall be made of single piece MS structure continuously tapered having polygonal (8sides) cross section and a single longitudinal welding, The welding will be done as per BS 5135 / IS 9595 and No circumferential welding shall be allowed in the pole shaft. The MS shall conform to BSEN 10025/10027. The structure shall be single hot dip galvanized as per IS 4759/BSEN 1461. A suitably designed door shall be provided at 600mm height from the pole base. Foundation accessories will be as per IS 1367 including supply and installation of 6 ways- 20A connector & 1A MCB mounted on 6mm thick painted M.S/GI plate, insulated, and fixed inside the pole suitable for termination of armoured aluminium cable as required and wiring to Luminaries from the 6A MCB, with 3x 2.5 sq.mm. PVC insulated copper, stranded conductor (P+N+PE) double sheathed wire including terminations. Excavation and necessary concrete foundation 1:2:4 concrete, bolts, nuts and washers of suitable size complete all as per manufacturer instruction and as directed by Engr-In-Charge.
27M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed.
28S&F in Repair LED flood light 150 watt 230 V AC outdoor type made up of pressure die cast aluminium housing with toughened glass and with high power LED withh secondary optics as lighting source and having TOP opening separate driver compartment with IP 66 protection and impact resistance of IK07 with 10 KV built in surge protection device of Crompton cat part no : LFLN-150-CDL/60-M or equivalent in Havells/Bajaj/Philips complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58096319
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 45.93 Lakhs
LAST DATE 06-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Hard Core (Pcc) Platform To Develop A Safe All Weather Volleyball Court, Provn Of Flood Light And Chain Link Fencing At Ancepta At Brichgunj Mil Stn, Under Ge Brichgunj, Sri Vijaya Puram
Basic Detail
Tender No 8864A
Bidding Type Tender
Location
City South Andamans
State Andaman And Nicobar Islands
Key Dates
Publish Date 16 Oct 2026
Submission Date 06 Nov 2026
Open Date 09 Nov 2026
Finance
Tender Value 45.93 Lakhs
Tender Fee 500
EMD 92000
Exemption Available
Document List
502ed580-85ac-4785-a3d1-1eb2e3f6354f.html
8864TENDER.pdf
BOQ_890844.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 06, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Nov 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
html

502ed580-85ac-4785-a3d1-1eb2e3f6354f.html

pdf

8864TENDER.pdf

xls

BOQ_890844.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender