Tender For Addn/ Altn To Building No 35 B Sardhana Road Of 22 Rapid (S) Under Ge (North) Meerut Cantt
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Nov 2026
10 days left
EMD
9700
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/ Altn To Building No 35 B Sardhana Road Of 22 Rapid (S) Under Ge (North) Meerut Cantt
BOQ
| Sl. No. | Item Description |
| 1 | M&L 1st class teak hard wood, plain, solid, straight chowkats and frames, wrought, framed, worught, framed rebated on the solid, rounded of chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 2 | M&L 35mm thick 1st class teak hard wood heritage wood work shutter designer pattern (panelled/ plain) design pattern as approved by GE) including fixing to frame complete all as specified and directed. |
| 3 | M&L 35mm thick 1st class teak hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed |
| 4 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 5 | M&L for preparation of new or previously untreated surfaces of any description, over 10cm in width or girth and french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed. |
| 6 | S&F Brass 300mm sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed all as specified & directed. |
| 7 | S&F brass barrel tower bolt with bright bolt 300 mm long all as specified & directed |
| 8 | S&F 150mm Extruded brass handles, fabricated type polished all as specified & directed |
| 9 | S&F 100mm butt hinges, stainless steel complete all as specified and directed. |
| 10 | S&F Brass Mortice lock, vertical type, size 100 mm, 4 levers complete all as specified and directed. |
| 11 | S&F, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed. complete all as specified and directed. |
| 12 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 13 | S&F Powder coated anodised aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 14 | S&F Powder coated Anodised aluminium door shutters section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, sliding door bolt, tower bolt and anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 15 | S&F 4.8mm thick glass ordinary quality, ground or obscured or frosted, on one side fixed in windows/ ventilators in squares exc 0.50 Sqm in each pane complete all as specified and directed. |
| 16 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 17 | M&L for rendering 15 mm thick on brick or concrete on fare surfaces in cement mortar 1:4 finished even and smooth without using extra cement at any heigth complete all as specified and as directed. |
| 18 | M&L for rendering 10mm thick in CM 1:6 on fair face of brick work or concrete surfaces finished even and smooth without using extra cement at any height complete all as specified and directed. |
| 19 | M&L for complete removal of existing treatment on walls complete all as specified and directed |
| 20 | M&L for applying 2mm thick wall care putty on walls a complete all as specified and directed. |
| 21 | M&L for preparation of new or previously untreated surfaces of any description over 10cm width or girth and applying two coats of plastic emulsion paint at any height complete all as specified and directed. |
| 22 | Material & Labour for complete removal of existing treatment of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) (Weather coat) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 23 | M&L 75mm thick PCC in plinth protection and paving 1:3:6 type C-1,(20mm gradded aggregate) finishing cement concrete even and smooth in slope without using extra cement complete all as specified and directed. |
| 24 | Demolition of brick work / stone masonry built in cement mortar complete all as specified and directed. |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises complete all as specified and directed. |
| 26 | M&L Vitrified Ceramic tiles dark shade/double charged/ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 27 | All as described item Ser No 26 here-in-before but as in skirting complete all as specified and directed. |
| 28 | M&L for High strength polymer modified adhesive for fixing tiles as per manufacturer directions complete all as specified and directed. |
| 29 | S&F for Rolled sections as in main and cross beams, hip and jack rafters; Purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates of Fe-410-W(Gde-E-250 quality-A) (framed)etc,complete all as specified and directed. |
| 30 | M&L for Two coat of synthetic enamel paint on new steel surface, including preparation of surface, of any description over 10CM width or girth not otherwise described over one coat of red oxide complete all as specified and directed. |
| 31 | S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 32 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 33 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 34 | Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476(part4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of Hot dipped galvanized iron section of 0.33mm thick (galvanised @ 120grams per sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600mm to form grid module of size 600x600mm suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x85x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm centre to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 35 | M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 36 | S&F in repairs double bowl stainless steel kitchen sink 1mm thick with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 1142mmx504mmx250mm including waste coupling and waste pipe complete all as specified and directed. |
| 37 | M&L for treating the soil along with external perimeter of building at the rate of 2.25 litreof emulsion per metre of the perimeter wall complete all as specified and directed. |
| 38 | M&L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cementmortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 39 | S&F in repairs 140mm floor door stopper of aluminium alloy body and tonge, anodised with hard drawn steel spring complete all as specified and directed. |
| 40 | S&F in repairs stainless steel drapery rod of size 25mm inner dia (in lengths as directed) of approved colour with and including decorative finial at both ends and pair of stainless steel brackets fixed at both ends with PVC rawl plugs and screws on walls/beam complete all as specifed and directed. |
| 41 | S&F in repairs vitreous china wash down water closet pan one piece EWCs snow white size (700x350x745mm) with duraplast slim soft close seat cover including connection to outgoing pipe and S trap complete all as specified and directed. |
| 42 | M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, sheathed, copper conductor cable in and including PVC concealed conduit of not less than 20mm dia complete with all accessories/fittings, brass screws, washer etc, including modular boxes, modular plates suitable for fixing modular switches/sockets and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, sheathed and connected to common earth and earth duly complete all as specified and directed for the followings :- (a) One tube light/Bulb/ ceiling fan/ exhaust fan/ security light point controlled by one, one way switch 05 / 06 Amps. |
| 43 | All as described item Ser No 42 here-in-before One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. complete all as specified and directed. |
| 44 | All as described item Ser No 43 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. complete all as specified and directed. |
| 45 | S&F Modular Switch, 1 module, 6A, AC, 240V, one way ISI Marked and as specified. |
| 46 | S&F Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, ISI Marked and as specified. |
| 47 | S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, ISI Marked and as specified. |
| 48 | S&F Modular Switch, 1 module, 16A, AC, 240V, one way ISI Marked and as specified. |
| 49 | Supply & fix in repair recess mounting high lumen LED flat panel 2'X2' 36Watt, white powder coated CRCA housing with high power LEDs, aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver, LED strip ,connector block etc. and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed. |
| 50 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 ,IK08 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed . |
| 51 | Supply and fix MCB single pole 240 volt 6 to 32 amps 10 KA. complete all as specified and directed. |
| 52 | S&F in repair MCB SPN 40 Amps, AC, 240V, 10KA, ISI Marked 'C' curve incl thimble etc complete all as specified and directed. |
| 53 | M & L for sub main wiring with two single core 2.5Sqmm nominal area with 1100 Volt grade, conforming to IS 694 (2010) PVC insulated, unsheathed, with one runof 2.5 sqmm multi stranded copper conductor cable (FRLSH) ISI marked for continous earth wire drwan in and including concealed rigid non-metallic PVC conduit (ISI Marked) of size 19/20 mm dia medium grade with fitting (ISI) marked including cutting , chasing for conduit and making good ofvwalls etc complete all as specified and directed. |
| 54 | Single pole and neutral enclosure with two pin and earth plug and socket complete with 20 Amp MCB,comlete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender