Tender For Special Repair Of Bldg No T-115 (Unit Guest Room) At Afmsd Under Ge (West), Delhi Cantt-10.
Tender Value
48.95 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
10 days left
EMD
97900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Bldg No T-115 (Unit Guest Room) At Afmsd Under Ge (West), Delhi Cantt-10.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating( 150GSM) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating( 150GSM) GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge,roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 5 | Providing & fixing Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm all as specified as per directions of the Engineer-in Charge. |
| 6 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 7 | M&L for exposed 8mm thick metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 8 | Dismantling wooden scantling work framed truss etc complete all as specified and directed. |
| 9 | S&F mild steel rolled work as in roof trusses, (framed),trussed,purlin,crane gantries,rails and heavy bracket framing (Beam,angle,channel or flat section) including distance pieces,cleats etc,confirming to gradeFe 410 -W (GdeE- 250) quality-A, complete all as specified and directed. |
| 10 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 11 | S&F for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, angle iron chowkhats; ladders; framed balusters; walk ways; railings; framework of water tanks, wind tie and similar work conforming to Fe.290.Gde-E-165 including fixing of hold fast with bed block of size 200x200x15mm in CM 1:2:4 (using 20mm graded agg complete all as specified and directed. |
| 12 | M&L 1.6mm thick mild steel, plain, sheet inwall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to concrete or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed. |
| 13 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over and incld a coat of red oxide primer.complete all as specified and directed. |
| 14 | Taking down Chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from the frames).complete all as specified and directed. |
| 15 | Taking down Chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames).complete all as specified and directed. |
| 16 | M&L PCC 1:3:6 type C1 (20mm gr agg) as in anchoring hold fast, bed plate etc all as specified and directed. |
| 17 | Taking down cement plaster from stone/brick walls including racking out joints for keys and scrubbing down with water etc, complete all as specified and directed. |
| 18 | Material and labour for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement; 4 coarse sand)(sand source - Badarpur) furrowing the under layer with scatching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 marble dust : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings incl nailing with 75 mm MS nails @ 450 mm both ways on wall surface complete all as specified complete incl taking down old plaster as per specifications and direction of the Engineer-in-charge. |
| 19 | M&L for forming groove (area of each panel not exceeding 2 sqm each) of size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed. |
| 20 | M&L for 10mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on external walls, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed. |
| 21 | M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over and incld a coat of alkali primer (of approved quality and tint) on wall using painting roller, complete all as specified and directed. |
| 22 | M&L for complete removal of exixting treatment of walls and applying two coat of oil bound distemper over and incld a coat of alkali primer (of approved quality and tint) on wall using painting roller, complete all as specified and directed. |
| 23 | Providing and applying wall care putty of 1 mm thick over plastered surface to prepare the surface even and smooth. complete all as specified and directed. |
| 24 | Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and Precast concrete articles, complete all as sfd and directed. |
| 25 | M&L for Brick work with Sub class 'B' old size burnt bricks straight or curved on plan exceeding 6m mean radius, built in Cement mortar 1:6 complete all as specified and directed. |
| 26 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 27 | Demolition of cement concrete in ground floor and paving n.exc 15CM thickness (below or above ground level) complete all as specified & directed. |
| 28 | M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-2(using 40 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight all as directed at site complete all as specified & directed. |
| 29 | M&L PCC 1:3:6 type D2 using 40 mm graded stone aggregate as in foundation filing and mass concrete complete all as specified & directed. |
| 30 | Dismantling of stone slab/paving tiles laid, bedded and pointed in any mortar of any description or thickness in floors complete all as specified & directed. |
| 31 | M&LProviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and properembedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using platevibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed. |
| 32 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and incld 15mm thick cement screed base in CM 1:4 complete all as spd & directed. |
| 33 | M&L Machine cut kota stone slab 20-25 mm thick as in vertical surfaces such as riser of steps, skirting, dado and pillar etc., laid over and incl 10 mm thick backing coat in CM 1:3 set and jointed in neat cement slurry and pinted with cement and pigment to match the shade of the slab incl rubbing and polishing etc complete all as specified and as directed. |
| 34 | Grinding, rubbing and Mirror polishing on old marble/granite/kota stone/stone work where ever required to give high gloss finish complete all as specified and directed. |
| 35 | S&F 35mm thik 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 36 | M&L for two coat of synthetic enamel painting on new wooden surfaces over 10cms width or girth over a coat of pink primer etc all as specified and directed. |
| 37 | S&F providing 30mm thick factory made solid WPC door shutter consisting of density 650 kg/cum manufactured by an ISO 9001-2015 certified company door to be panneled. The door should be water prooof , termite proof, fore retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardware should be fixed with 19x6mm size steel screws etc complete as per direction of engr in charge, manufacturers specifications & drawings Note: Fixture /fittings shall be measured & paid under relevant item. |
| 38 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantt and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 39 | S&F providing 30mm thick factory made wire mesh solid WPC door shutter consisting of density 650 kg/cum manufactured by an ISO 9001-2015 certified company door to be panneled with SS mosquito mesh and XTN aluminum mesh for additional strength and safety purpose. ( Conforming as per IS 4020) The door should be water prooof , termite proof, fore retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardware should be fixed with 19x6mm size steel screws etc complete as per direction of engr in charge, manufacturers specifications & drawings Note: Fixture /fittings other than hinges shall be measured & paid under relevant item. |
| 40 | S&F 100mm long aluminium butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed. |
| 41 | S&F 125mm long aluminum anodised handle complete all as specified and directed. |
| 42 | S&F 150mm long aluminium anodised tower bolt complete all as specified and directed. |
| 43 | S & F stainless steel butt hinges 100mm long medium weight etc complete all as specified and directed. |
| 44 | S & F 200mm long aluminum, anodized barrel tower bolts of extruded section complete all as specified & directed. |
| 45 | S & F aluminum anodised handle 150 mm long cast type complete all as specified & directed. |
| 46 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. |
| 47 | S&F Door closer hydraulically regulated,aluminium extruded section body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed. |
| 48 | S&F floor door stopper Overall length of cover plate 140 mm of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 49 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereverrequired including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 50 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 51 | S&F 4 mm thick figured glass/ pin head type and glazing in squares not exc 0.5 Sqn in each pane complete all as specified and directed. |
| 52 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples (for windows and gauzed doors) all as specified and directed |
| 53 | Supply and fabrication & fixing of cupboards, lower and upper cabints ( depth of 45 Cm up to 70 Cm) etc ,front side, bottom, top, and partions etc made out of 15-18 mm thick HDHMR board and back side 12 mm board (action tesa or equivalent ) with the front face shall be covered with laminate of high gloss from merino and the edges to be covered via 1.3 mm thick edge bending tape (colour of glossy laminates as approved by GE) Colour of laminates , design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters , C/J gola profile for handel less, etc as required complete all as specified and as directed including frame work etc all as specified and directed.. |
| 54 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and including disposal of all debris out side MoD land complete all as specified and directed. |
| 55 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular ) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 15 mm thick screed bed in CM 1:6 complete all as directed. |
| 56 | M&L vitrified tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment match the colour of tiles with and incl 15mm thick screed bed in CM 1:6.complete all as specified and directed by engr in charge. |
| 57 | M&L for glazed ceramic coloured tiles (350x250x7mm/450x350x7mm ) thick on vertical surfaces such as skirting and dado set and joint in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in C:M 1:3 rough to receive tiles complete all as specified and directed by engr in charge. |
| 58 | S&F curtain rod 25 mm dia SS, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 59 | M&L for 17-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl Screed bed or bedding layer 15 mm thick of mortar 1:4 complete all as specified and directed. |
| 60 | S&F in repair grating doom 100 mm dia square pattern with frame with hole/ without hole of CP complete all as specified and directed. |
| 61 | M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified & directed. |
| 62 | Supplying and laying of 20 mm external dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all plain fittings in trenches/ walls including dismantling old GI pipes including complete all as specified and directed. |
| 63 | Supplying and laying of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass and plain fittings including dismantling old GI pipes complete all as specified and directed. |
| 64 | S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls fixed with MS clamps and shoe at ground level incl dismantling up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as directed. |
| 65 | S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls fixed with MS clamps and shoe at ground level incl dismantling drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as directed. |
| 66 | M&L in repair for PVC floor trap of 100mm dia,plain with grating including jointing with solvent cement.complete all as specified and directed. |
| 67 | S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement.complete all as specified and directed. |
| 68 | S&F 110mm PVC (SWR) bends any radius complete all as specified & directed. |
| 69 | S&F 75 mm PVC (SWR) bends any radius complete all as specified & directed. |
| 70 | S&F PVC (SWR) 110 mm vent cowl complete all as specified & directed. |
| 71 | Supply and fix chromium plated single tubular towel rail 20mm dia, D type 60 cm long between flanges, including a pair of CP brass brackets complete all as specified and directed. |
| 72 | Supply and fix chromium plated single tubular towel rack 20mm dia, D type 60 cm long between flanges, including a pair of CP brass brackets complete all as specified and directed. |
| 73 | Supply and fix chromium plated single tubular towel ring standard size including a pair of CP brass brackets complete all as specified and directed. |
| 74 | Supply and fix for chromium plated soap dish complete all as specified and directed. |
| 75 | S&F in repair vitreous china wash hand basin, white flat back, size 580 x 450mm excluding taps, waste pipe chain and plug and porcelain but including brackets, 32 mm dia waste coupling complete all as specified and directed. |
| 76 | S&F in repairs Two way Bib cock, fancy type chromium plated cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete in all respect as specified. |
| 77 | S&F in repair Health Faucet mild steel chromium plated suitable for 15 mm dai pipe with 1.25 mtr long flexible tube and wall hook including making connections and fixed in position complete in all respect as specified. |
| 78 | S&F Brass CP mixer for mixing hot & cold water (for wash hand basin) and fixed including dismantling of 15mm dia chromium plated pillar tap, complete all as specified and directed. |
| 79 | Supply and fix in repair 15 mm dia 3- in- one wall mixer , chromium plated brass fancy type with all connection sleeves, capstan head, scrwed down complete all as specified. |
| 80 | S&F in repairs stainless steel kitchen sink with drainage board made of stainless steel 1.0 mm thick sheet, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, connecting up and with al required plugs, washers, grating, strainer, connecting union, wastes copling etc, incl bedding in CM 1:4 on dwarf wall, supported on half brick thick walls on two sides with suitable MS cantilever brackets.complete all as specified and directed. |
| 81 | S&F Brass CP mixer for mixing hot & cold water (for sink) and fixed including dismantling of 15mm dia chromium plated pillar tap, complete all as specified and directed. |
| 82 | S&F in repair mirror 600mm X450mm bevelled edge of selected quality glass with chromium plated brass screws and cup washers complete all as specified and directed. |
| 83 | S&F in repair sphyphonic/wash down standrad size, square/oval, rimless one piece EWC of white colour incl traps, seat cover, flushpipe and connecting pipe, inlet and over flow pipes for flushing cistern incl jointing to socket of flushing rim and connecting pipe to union of flushing cistern complete all as specified and directed. |
| 84 | S&F in repairs PVC connections braded wire 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 85 | S&F in repair 15mm dia bib taps, cast copper alloy chromium plated with capstan head fancy type,screwed down,screwed for iron pipe or for brass ferrule and fixed all as specified. |
| 86 | S&F in repairs 15 mm bore chromium plated fancy type stop valve/angle valve, cast copper alloy screwed down high pressure with capstain head with long shank & cup complete all as specified & directed. |
| 87 | S&F Stainless Steel 304 grade plate rack standard size 600mmx900mm complete all as specified & directed. |
| 88 | M&L 1000 litres capacity rotational moulded polyethylene water storage tanks ISI marked triple layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified including 20 mm brass valve high pressure with polyethylene float and fly nut complete and GI tank nipple, screwd for iron pipe incld dismantling of tank tank nipple and float valve complete all as specified and directed. |
| 89 | Excavation in trenches n.exc 1.5m wide and n.exc 1.50m depth, for foundation etc. and getting out in soft/loose soil.complete all as specified and directed. |
| 90 | Returning filling in excavated approved earth in to trenches around pipe etc after laying of pipes and testing complete including watering and well ramming in 25 cm layers complete all as specified & directed.complete all as specified and directed. |
| 91 | Removing surplus soil to a distance beyond 5 km upto total distanceof 15 km out side defence area where directed complete all as specified & directed.. |
| 92 | M&L for 150mm nominal size Double wall corrugated HDPE pipes stiffness class SN 8 high density,polyethylene pipe resistent to chemicals,easy and light weighted,long living,low friction,flexible,sun resistant pipe and laid in trenches incl demolition of old pipes complete all as specified and directed. |
| 93 | S&F factory made SFRC (Steel fibre reinforcement concrete ) manhole cover medium duty M-25 grade,75mm thick with SFRC frame of clear size exc. 0.35 Sqm but n.exc 0.90 Sqm, provided with provision of two lifting hooks welded at appropriate location, complete all as specified & directed. |
| 94 | Supply and fix sheet glass shelf/corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as directed. |
| 95 | S&F in repairs 32 mm PVC waste pipe 600 mm long with complete all as specified. |
| 96 | S&F Chromium plated toilet paper holder including fixing arrangement complete all as specified and directed . |
| 97 | Supply and fix in repair chromium plated shower rose 150 mm size with shower arm rod complete all as specified and directed. |
| 98 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removal rubbish outside MD Land complete all as specified and as directed |
| 99 | M&L for RCC 1:1.5:3 nominal mix with using 20mm graded stone agg as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, desk slabs and in shelves and the like etc all as specified and directed. |
| 100 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and as directed. |
| 101 | Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns/beams, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips , complete all as specified and as directed. |
| 102 | M&L post construction Anti Termite Treatment treating the top surface of filled earth at the rate of 5 litres of emulsion per sqm of surface area.complete all as specified and directed. |
| 103 | M&L ploviding and injectiong chemical emulsion for post construction anti termite treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. complete all as specified and directed. |
| 104 | Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets,regulators light fittings) and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specfied & directed. |
| 105 | Material & Labour for point wiring with 1.5 sqmm (nominal size) single core, 1100 Volts grade, multi stranded, PVC insulated, unsheathed FRLSH electrolytic copper conductor cable conforming to IS 694:2010 with and including continuous earth wire of size 1.5 sqmm (nominal size) single core, 1100 Volts grade, multi stranded, PVC insulated, unsheathed, FRLSH electrolytic copper conductor cable and connected to earth dolly, colour coded as per IS 11353:1985 drawn through an including concealed medium grade, PVC conduit of 20 mm dia (Nominal bore) or higher, minimum wall thickness 1.6 mm conforming to IS 9537(Part 3):1983 for conduits complete with and including all conduit accessories (conforming to IS 3419:1988 for conduit accessories) and factory made not less than 1.2 mm thick sunken modular flush sheet galvanised metal enclosure having zinc coating not less than 120 GSM conforming to IS 14772:2000 having bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover plate with frame and making good of disturbed surfaces of wall/ceiling/floor etc complete all as specified in IS 732:2019 and directed by Engr-in-Charge at site for the following :- |
| 106 | (a) One light/fan/bell/Exhaust fan/Fresh Air Fan point controlled by one way switch 5 amps. (Switch to be measured and paid separately) complete all as specified and directed. |
| 107 | (b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. (Switch and socket to be measured and paid separately) |
| 108 | (c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board alongwith other switches. (Switch and socket to be measured and paid separately) |
| 109 | All as per above item No 108. but with cable 2.5 Sqmm size 1100 volts grade for One 3 Pin socket 15A Independent board |
| 110 | Material & Labour for point wiring with 4.0 sqmm (nominal size) single core, 1100 Volts grade, multi stranded, PVC insulated, unsheathed FRLSH electrolytic copper conductor cable conforming to IS 694:2010 with and including continuous earth wire of size 4.0 sqmm (nominal size) single core, 1100 Volts grade, multi stranded, PVC insulated, unsheathed, FRLSH electrolytic copper conductor cable and connected to earth dolly, colour coded as per IS 11353:1985 drawn through an including concealed medium grade, PVC conduit of 20 mm dia (Nominal bore) or higher, minimum wall thickness 1.6 mm conforming to IS 9537(Part 3):1983 for conduits complete with and including all conduit accessories (conforming to IS 3419:1988 for conduit accessories) and factory made not less than 1.2 mm thick sunken modular flush sheet galvanised metal enclosure having zinc coating not less than 120 GSM conforming to IS 14772:2000 having bottom, side and back-wall knockouts for conduit entry from any direction for one 3 pin AC Box outlet 20 Amps concealed and making good of disturbed surfaces of wall/ceiling/floor etc complete all as specified in IS 732:2019 and directed by Engr-in-Charge. (For AC point) |
| 111 | S&F single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp, 10 KA breaking caacity complete all as specified and directed. |
| 112 | S&F Modular switch 1 way 6A,1 module, 230V, 50 Hz complete all as specified and directed. |
| 113 | S&F Modular switch 1 way 16A,1 module, 230V, 50 Hz complete all as specified and directed. |
| 114 | S&F Modular socket 6A- 3 pin combined 2 module,230V, 50 Hz complete all as specified and directed. |
| 115 | S&F Modular socket 6A/16A - 2/3 pin combined 2 module, 230V, 50 Hz complete all as specified and directed. |
| 116 | Supply and fix switch modular type single pole bell push 6 Amps.complete all as specified and directed. |
| 117 | S&F bell ding dong AC,230 volts,single pole .complete all as specified and directed. |
| 118 | S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed. |
| 119 | M&L for Decorative wall light fitting made up of Polycarbonate B-22 base suitable including 9 watt LED Lamp complete all as specified and directed. |
| 120 | Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated, FRLSH, unsheathed cables of 1100 Volts grade conforming to IS 694:2010 complete including taking down existing old wire all as specified and directed. Note :- Two runs of IC x 6.00 sqmm (Phase wire and neutral ) and one run of IC x 6.00 sqmm (as earth wire) will be measured as one unit length. |
| 121 | Taking down of Ceiling fan, Ceiling cable end, dismantling blades and removing fan and blades and deposit to the MES store yard complete all as specified and directed. |
| 122 | S & F 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor copper wound, class of insulation : B, 3 nos. blades, 45-60 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.50, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS 374:2019), THD less than 10%, regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete. |
| 123 | S&F of factory made epoxy polyester powder coated distribution board SP & N 12 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43, IK 9 protection) fixed flush to wall and suitable for universal mounting and including 100 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 10 SP MCBs as outgoings complete all as specified and conforming to IEC 61439-3 including taking down old DBs all as specified and directed.NOTE :-(a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 124 | S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity conforming to IEC 60898-1:2002 complete all as specified and directed. |
| 125 | S&F of single pole MCB 40 Amps, 240 v, 50 Hz AC made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity conforming to IEC 60898-1:2002 complete all as specified and directed. |
| 126 | S&F of SPN MCB 40 Amps, 240V, 50 Hz AC made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10KA breaking capacity conforming to IEC 60898-1:2002 complete all as specified and directed. |
| 127 | S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-43 & IK 9 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 100 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for 100 Amps, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings including blank spacer for blank space complete all as specified and conforming to IEC 61439-3 including taking down old DBs all as specified.NOTE :-(a) MCBs/MCCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 128 | S&F of MCCB 100 Amp, 4 pole, 16 KA breaking capacity at 415 V, 50 Hz conforming to IEC 60947-2 with fixed thermal magnetic release complete all as specified directed. |
| 129 | S&F of surface mounting LED aluminium Batten 20 W LED light. Fixture should have System Luminous Efficacy : ≥ 100 Lm/W, life of fixture not less than 50K Hrs,CCT 4000-6500K & CRI>80, PF≥0.90. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed. |
| 130 | S&F of surface mounting LED aluminium Batten 10 W LED light. Fixture should have minimum efficacy at system level >=100 lumens/Watt, life of fixture not less than 50K Hrs,CCT 4000-6500K & CRI>80, PF≥0.90. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed. |
| 131 | S&F of 35 watts 230 V AC outdoor type with High efficient LED Building security light fitting with high pressure die cast Aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP: 65/66 protected complete with bracket made out of 40 mm GI pipe light grade 1.2 mtr long bend to shape with clamps and fixing bolts all as specified and directed. |
| 132 | Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, copper winding of sweep 300 mm complete all as directed and specified. |
| 133 | Supply and fix exhaust fan metallic type ventilating single phase 230/240 V of 300 mm sweep with louvre including cutting of holes in a round/square shape complete all as directed and specified. |
| 134 | S & F water heater storage type Geyser vertical type with suitable size of fastner and inner tank material of superior glass lined tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braided pipe of size 15mmx600mm long with adopter for inlet and outlet water connection suitable for hot and cold water having adjustable knob for temperature control and inner tank should be glass lined coated, capacity 25 Ltrs, having heating element 2 KW and BEE 5 star rated, suitable for 230 volt, 50 Hz electric supply complete all as specified and directed . |
| 135 | M&L in replacement of earthing complete with galvanised steel earth plate 600X600X6 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.50 m below GL) connected with GI earth lead wire 4.0 mm as earthing leads by means of bolts, nuts, check nuts and washers all joints as shown on drawings and including excavation, earth work. GI pipe light grade 15 mm bore for protection of GI earth wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1 chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed at site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender