Tender For Special Repair Of Offrs Md Accn (Maj) Bldg No P-216/1 & 216/2 & Special Repairs To Otm Bldg No T-142 & T-143 (Bn Mag) At Bd Bari Mil Stn Under Ge Kaluchak.
Tender Value
45.62 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
20 days left
EMD
91300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kaluchak → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Offrs Md Accn (Maj) Bldg No P-216/1 & 216/2 & Special Repairs To Otm Bldg No T-142 & T-143 (Bn Mag) At Bd Bari Mil Stn Under Ge Kaluchak.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed. |
| 2 | Demolition of cement concrete (unreinforced) or tiling etc in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed. |
| 3 | Demolition of cement concrete (Re-inforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed. |
| 4 | Taking down cement plaster/wall tiles including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed |
| 5 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed. |
| 6 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified & directed. |
| 7 | M&L Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, complete all as specified & directed. |
| 8 | S&F Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 8 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts etc all as shown on Drg No CEPZ/TD -354/09 sheet 1/3 to 3/3 including one coat of red oxide zinc primer, complete all as specified and directed. |
| 9 | M&L PCC 1:2:4 ftype B-1 using 20mm graded aggregates as in anchoring hold fast, copoing, apex plates, bed plates and the like including weathering slightly rounded or chamfered angles and throating etc. complete all as specified and directed. |
| 10 | S&F of aluminium powder coated (minium thickness 50 micron) door shutter, rails (top, middle and style) of size 82.53x44.45mm and bottom rail of size 114.30x44.45mm made out of 1.6mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, mortice lock having six levers, aluminium body hydraulic door closer of suitable size, handles 2 Nos in each shutter, tower bolt, hinges etc, anodised aluminum snap beading screws, complete all as specified & directed. Note PVC Panels & Sheet Glass will be measured and paid separately under respective item complete all as specified & directed. |
| 11 | S&F of 5.5mm thick glass with solar control film 50micron reflective type sticed to glass panes as per instructins of manufacturersas in aluminium door with aluminium hollow beading/glazing clip (included with shutters) including rubber gasket, complete,all as specified & directed |
| 12 | S&F powder coated aluminium sliding window (three track) consisting of two shutter of glazed and one shutter of flyproof. complete all as specified & directed.Note :The item shall be included as following :(a) Aluminium powder coated frame of section 100 x 44 mm x 1.5 mm with or without rebate.(b) Aluminium powder coated for window shutters of section 40 x 20 mm x 1.5 mm thick (Two shutter of glass and one shutter of wiremesh) incl self locking catch & roller etc).(c) 5.5 5mm thick coloured or tinted glass glazing as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket(d) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples. |
| 13 | S&F powder coated aluminium sliding window (Two track) consisting of two shutter of glazed and flyproof mesh fixed on external face of window frame. complete all as specified & directed.Note :The item shall be included as following :(a) Aluminium powder coated frame of section 63.5 x38.10 mm x 1.02 mm thick with or without rebate.(b) Aluminium powder coated window shutters of section 40 x 18 mm x 1.25 mm thick (Two shutter of glass and one shutter of wiremesh) incl self locking catch & roller etc).(c) 5.5 5mm thick coloured or tinted glass glazing as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket.(d) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples and aluminium beads.. |
| 14 | M&L for Framed work as in grills,gratings etc with end of bars shouldered or riveted or forged into spikes, framed guard bars confirming to Fe-290, Gde -E-165 complete all as specified & directed. |
| 15 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified & directed. |
| 16 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet 5mm thick to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified & directed. |
| 17 | M&L for Hasp and staple 100 mm in size, aluminium anodised, including bolt to hinge plate and fixed with screws. complete all as specified & directed. |
| 18 | S&F 18mm thick PVC Celuka board without lamination of any colour as in Kitchen cupboard shutters/shelves etc, fixed in repairs, complete all as specified & directed |
| 19 | S&F 18mm thick PVC celuka board with lamination, glossy finish of any colour as in Kitchen cupboard shutters/ shelves etc, fixed in repairs, complete all as specified & directed |
| 20 | S&F 6mm thick PVC celuka board without lamination of any colour as in kitchen cupboard shutters/shelves etc, fix in repairs, complete all as specified & directed |
| 21 | S&F Zero crank hinge of size 150mm, heavy duty, soft closing type as in shutter of cupboards in Kitchen, complete all as specified & directed |
| 22 | S&F 50mm dia and 75mm long steel support, fixed at bottom of cupboard box, complete all as specified & directed |
| 23 | S&F Stainless steel designer handle (heavy duty) of 100mm size, fixed to drawers or cupboard shutters, complete all as specifed & directed |
| 24 | S&F Stainless steel designer handle (heavy duty) of 150mm size, fixed to drawers or cupboard shutters, complete all as specifed & directed |
| 25 | S&F Magnetic catcher, heavy duty, brass body and striking plate fixed in cupboard shutters,complete all as specified and directed. |
| 26 | S&F 150mm long fancy type stainless steel handels for shutters complete asll as Specifed and directed. |
| 27 | S&F Continuous (piano) hinges, mild steel, bright finish width of flaps (when open) 40mm all as specified and directed |
| 28 | S&F 100mm size hasp and staple stailess steel safety type , fixed with screws complete all as specified and directed |
| 29 | S&F 50mm dia polished hardwood knobs fixed with screws complete all as specified and directed |
| 30 | S&F of stainless steel auto, zero crank hinges, fancy type (as per sample) with cocealed patern fitted to shutters complete all as specified and directed. |
| 31 | S&F for Butt hinges 100 mm long, stainless steel, medium weight and fixed complete all as specified & directed. |
| 32 | S&F stainless steel, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed complete all as specified & directed. |
| 33 | S&F stainless stee, barrel tower bolts 200 mm of extruded section and fixed complete all as specified & directed. |
| 34 | S&F stainless stee, barrel tower bolts 150 mm of extruded section and fixed complete all as specified & directed. |
| 35 | S&F stainless stee, handles 150 mm of extruded section and fixed complete all as specified & directed. |
| 36 | S&F stainless stee, handles 125 mm of extruded section and fixed complete all as specified & directed. |
| 37 | S&F for floor door stopper of 140mm long cover plate of brass body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 38 | S&F Mild steel, 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door frame. complete all as specified & directed. |
| 39 | Supply and fixing in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel wings with 50 mm dia and proportionate for part there off, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. Note :-The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings) complete all as specified & directed. |
| 40 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 41 | M&L Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing ,etc., and making good, cutting not exc 20 cm girth in brick walls, complete all as specified & directed. |
| 42 | Supply & Fixed steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified & directed. |
| 43 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 44 | Supply & Fixed steel water tubing 20 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified & directed. |
| 45 | Taking up or down steel tubing of 25mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 46 | Supply & Fixed steel water tubing 25 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified & directed. |
| 47 | Supplied and fixed Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. |
| 48 | Supplied and fixed Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. |
| 49 | S&F Stop valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore and fixed. complete all as specified & directed. |
| 50 | S&F Bib tap 15 mm bore long body, Brass CP, fancy type (long shank )., with crutch or butterfly handle screwed down screwed for iron/PVC pipe or for brass ferrule and fixed, complete all as specified & directed. |
| 51 | S&F Stop valve /Angle valve (ISI Marked), fancy type, chromium plated with long shank and cup (concealed type). screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron /PVC pipe or for unions of 15 mm bore and fixed in repair complete all as specified & directed. |
| 52 | Supply and fixed Soap dish cantabile-clea (material SS finish, glossy) fixed to plugs with CP brass screws. complete all as specified & directed. |
| 53 | S & F in repair corner glass shelf 5.5mm thick with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified & directed. |
| 54 | Supply & fixed in repair, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white including integral foot rests (excl flushing cistern and flush pipe) but including provision of lime concrete. complete all as specified & directed. |
| 55 | Supply & fixed i repair , Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device. complete all as specified & directed. |
| 56 | S&F in repair Health Faucet with 8 mm dia,1.2 m long Long Flexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed. |
| 57 | S&F Toilet paper holder, Brass CP, with brass cp screws. complete all as specified & directed. |
| 58 | Supply & fixed Plastic Cabinet type looking mirror of selected quality glass, and fixed to wooden plugs with CP brass screws and cup washers. complete all as specified & directed. |
| 59 | S&F in repair stainleess steel towel rack 600 MM long with lower hanger, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed. |
| 60 | Supplied and fixed in repair CP brass towel ring 20mm dia, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed. |
| 61 | Supply and fixed in repairs 15mm bore brass Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange mixing hot and cold water, screwd down for 15mm dia iron pipe complete all as specified and as directed . Note:- Hand shower & over head shower will be measured and paid separately. complete all as specified & directed. |
| 62 | S&F Centre hole basin mixer without popup waste system with 450mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed and all as specified and directed. |
| 63 | S&F Sink mixer with regular spout brass CP for iron/pvc pipes 15 mm bore, screwed for iron pipe and fixed and all as specified and directed. |
| 64 | Supply & fixed in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litres. complete all as specified & directed. |
| 65 | M&L for sunken treatment with glass fiber reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent) complete all as following :-Base Coat : Berger HS Latex plus (or equivalent)consumption base coat : 0.3 kg/m2Reinforcement : Glass fiberSecond and Third coat : Latex sheild 2K (or equivalent)Consumption top coat : 3 kg/m2System reqquirements : density : 2.00 kg/ltr;Compressive strength: 0.5N/mm2Wall penetration through the RCC slab must be sealed using Berger HS Repair (or equivalent).Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus (or equivalent) modified mortar with a bonding coat of Berger HS Latexplus (or equivalent) modified cement slurry upto sft.All depressions, unevenness, surface honeycombng shal be repaired using Berger HS Latex plus (or equivalent) modifiled polymer mortar with a bonding coat of Berger HS latex plus (or equivalent) modified cement slurry.Including cleaning of RCC surface to remove dust, loose paricles, etc with compressed air or any other suitable technique depending on site conditions, grinding aby sharp edges, etc.Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'AB' on page no. 108 of tender documents as per Sch 'A' Note No 19 Page No 17). |
| 66 | M&L for capillary rise treatment of walls as following :-Base coat: Berger HS Latex plus (or equivalent)Consumption base coat: 0.3 kg/m2Second and Third coat: Latex sheild 2K (or equivalent)Consumption top coat: 3 kg/m2System requirements: density: 2.00 kg/ltrCompressive strength: 0.5 N/mm2 Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'GH' on page no. 120 of tender documents as per Sch 'A' Note No 19 Page No 17). |
| 67 | Supplied and fixed sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed. |
| 68 | M&L Stainless steel plate rack(Utensil Rack) of size (900mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts,bolts & washers complete all as specified and as directed. |
| 69 | Supply & fixed, Vitreous china wash basin, white flat back, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but including vitreous china pedestal and PVC waste pipe with union, flexible suitable for wash hand basin or urinal, 32 mm dia. complete all as specified & directed. |
| 70 | Supply & fixed in repair, Pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia bore of pipe . complete all as specified & directed. |
| 71 | Supply & fixed in repair 600 x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers. complete all as specified & directed. |
| 72 | S&F Brass CP towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and directed. |
| 73 | S& F stainkless steel, Hat and coat hooks, solid body, 175mm to 250 m complete all as specified & directed. |
| 74 | Supply & fixed, PVC connection 15 mm bore with PTMT nuts of length 450 mm long. complete all as specified & directed. |
| 75 | M&L PVC (SWR) floor trap, dia of outlet in 75 mm, plain excluding grating, but including jointing with solvent cement fixed in repair. complete all as specified & directed. |
| 76 | Supply & fixed PVC grating square, 150 mm (Hinge pattern and with or without hole).complete all as specified & directed. |
| 77 | Supply & fixed in repair, 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. complete all as specified & directed. |
| 78 | Supply & fixed , 110 mm bore PVC (SWR) bends any radius, with or without excess door. complete all as specified & directed. |
| 79 | Supply & fixed , 110 mm bore PVC (SWR) branch piece , with or without excess door, single (Single Y) equal or unequal.with excess door. complete all as specified & directed. |
| 80 | Supply & fixed , 110 mm bore PVC (SWR) branch piece, with excess door, double (double Y) equal or unequal, with or without excess door. complete all as specified & directed. |
| 81 | Supply & fixed , 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal,with excess door. complete all as specified & directed. |
| 82 | Supply & fixed , 110 mm bore PVC (SWR) junction double, (double T), equal or unequal, with excess door complete all as specified & directed. |
| 83 | Supply & fixed , 110 mm bore PVC (SWR) vent cowl complete all as specified & directed. |
| 84 | Supply & fixed in repair, 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenches or in floor. complete all as specified & directed. |
| 85 | Supply & fixed in repair, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenches or in floor. complete all as specified & directed. |
| 86 | Supply & fixed in repair, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. complete all as specified & directed. |
| 87 | Supply & fixed , 75 mm bore PVC (SWR) bends any radius, with or without excess door. complete all as specified & directed. |
| 88 | Supply & fixed , 75 mm bore PVC (SWR) branch piece, single (Single Y) equal or unequal ,with excess door. complete all as specified & directed. |
| 89 | Supply & fixed , 75 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal.with excess door complete all as specified & directed. |
| 90 | Supply & fixed , 75 mm bore PVC (SWR) junction single, (Single T) ,with excess door, equal or unequal complete all as specified & directed. |
| 91 | Supply & fixed , 75 mm PVC (SWR) junction double, (double T), with excess door, equal or unequal complete all as specified & directed. |
| 92 | M&L Vitrified light shade ceremic tiles 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:4, complete all as specified & directed. |
| 93 | M&L Vitrified light shade ceremic tiles 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick rendering in cement mortar 1:3, complete all as specified & directed. |
| 94 | M&L Non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified and directed . |
| 95 | M&L Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed. |
| 96 | M&L 20 mm thick granite black marble (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including Screed bed or bedding layer of mortar 15mm thick for laying floor in CM 1:4 finished even & rough to receive top layer, complete all as specified and directed. |
| 97 | M&L Machine cut Kota stone slab flooring not less than 19mm thick (size of stone shall not less than 55cmx55cm), 75mm wide white marble border alround, laid over & including 15 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified & directed. |
| 98 | M&L Machine cut Kota stone slab not less than 19mm thick as in riser of steps, skirting, dado and pillar laid over & including 15 mm thick screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified & directed. |
| 99 | M&L 25 mm thick (average thickness) PCC1:2:4, type B-0 using 12.5mm graded stone aggregates as in floor by maintaing required gradient/undulation, finished even and fair. Complete all as specified and directed |
| 100 | M&L Rendering 10 mm thick plaster in cement mortar 1: 3 on concrete surfaces as in ceilings finished even and smooth without using extra cement, complete all as specified & directed. |
| 101 | M&L Rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:6, finished even and smooth without using extra cement. complete all as specified & directed. |
| 102 | M&L Rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:4, finished even and smooth without using extra cement. complete all as specified & directed. |
| 103 | Supply only integral WPC complete all as specified & directed. |
| 104 | Taking down cement plaster and decayed concrete of any description, upto tripple storey of building, from roof projection, chajja etc and making good the decayed portion with cement mortar 1 :3 mixed with water proofing compound as per manufacturers instruction or PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including necessary form work and finally finished the surface with 15mm thick cement plaster in CM 1:3 , complete all as specified and directed. |
| 105 | M&L for 75 mm thick cement concrete 1:2:4, type B2 (using 40mm graded agg) as in plinth protection finished even and smooth using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified & directed. |
| 106 | M&L Preparation of newly plastered surface of wall & applying 2-3mm thick Acrylic wall care putty on wall surfaces and all as specified and directed. |
| 107 | M&L Preparation of newly plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade , complete all as specified & directed. |
| 108 | M&L Complete removal of existing treatment of external wall surfaces such as RCC fins/facias/roof projection etc and applying two coats of all weather coat or Appex paint. complete all as specified & directed. |
| 109 | M&L for preparing newly plastered surfaces and applying two coats of distemper over one coat of primer as in ceiling etc. complete all as specified & directed. |
| 110 | M&L for preparing old plastered surfaces and applying two coats of distemper over one coat of primer as in ceiling etc. complete all as specified & directed. |
| 111 | M&L for preparation of old Painted steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer. complete all as specified & directed. |
| 112 | M&L Preparation of old Painted surfaces of wood or wood based surfaces of any description exc.10 cm. in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified & directed. |
| 113 | M&L 25 mm thick (average thickness) PCC1:2:4, type B-0 using 12.5mm graded stone aggregates as in floor by maintaing required gradient/undulation, finished even and fair as in roof padding including prepration of surface and mix with water proofing compound and finished even and fair without using extra cement, complete all as specified and directed. (Note : WPC will measured and paid separately as supply only). |
| 114 | M&L Complete removal of existing roof treatment or roof tile and removing from site to a place outside defence land as specified by civil authorities and clean the surface of roof with water and remove dust complete all as specified & directed. |
| 115 | M&L for Home Sheild PU Roofkoat (or equivalent) is a one component liquid, solvent free, cold applied water-proofing membrane that is highly elastic and UV resistant with 10 years warranty. ASTM D 6083-97 a waterproofing and heat reflecting system having following key performace properties : 1. UV resistant, prevent yellowing and weathering2. Highly elastic upto 350% and crack bridging3. Excellent adhesion on porous and non-porous substrates4. Tensile strength > 10 N/mm2 with Geo Textile fleece5. Soler reflective Index (SRI) more then 109-111 ASTM E 1980-11 System :First coat : Providing and applying primer over the prepared surface with HS PU roofkoat Primer (or equivalent)Coverage :0.2kg/m2 (with 50 % dilution of water)Reinforcement : Geotextile 40 gsmSecond coat : Home sheildroofkoat (or equivalent)Consumption : 0.5 kg/m2Third coat : HS PU roofkoat (or equivalent)Consumption : 0.8 kg/m2 System buildup-1.5kg/sqm with geotextile of 40 gsmFor accessible roof, tiles with scred/ adhesive may be fixed thereafter.Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'EF' on page no. 116 of tender documents as per Sch 'A' Note No 19 Page No 17). |
| 116 | M&L TMT bars (Fe 500),10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified & directed. |
| 117 | M&L Precast reinforced cement concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in cover slab set in CM 1:6, complete all as specified and directed. Note : (Reinforcement shall be measured and paid separately). |
| 118 | M&L Pre-cast cement concrete, factory made, hydraulically pressed blocks made of 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerb stone etc, setting in mortar mortar 1:3, complete all as specified & directed. |
| 119 | Precast designer coloured paver tiles with glossy finish (factory made rectified) of size 300mmx300mm x 20mm, top layer glazed made in any type of cement and pigment, in required patterns (compressive strength not less than 250 Kg per Sqcm) in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified & directed. |
| 120 | M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded agg) as in Sub-base to floor finishes. complete all as specified & directed. |
| 121 | Material and labour for writing letters or figures (block, Roman, Italic or Indian) exceeding 15 centimeter high but not exceeding 30 centimeter high etc with synthetic enamel paint including necessary scaffolding up to four storeys height of bldgs if required,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. |
| 122 | Material and labour for Stops, commas, short lines, dashes, hyphens, brackets, etc. including necessary scaffolding up to four storeys height of bldgs if required,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. |
| 123 | M&L Cleaning/clearing of sewage line (including manholes) 100mm to 150mm bore of any description, underground at any depth ,removing any type of blockage including desilting, descaling & dechocking of drains as well as manholes and depositing the sludge in a pit (including digging of pit) not less than 100 metres away from the site of cleaning and covering the sludge with layer of 2.5cm thick layer of earth and spraying unslacked lime on the pit and make line smooth functional all as specified and directed. |
| 124 | M&L Cleaning of blocked WC/floor trap/gully trap etc. including and upto first manhole manually and well flushing with clear water, making the seat functional including deposting the sludge in a pit (including digging of pit) not less than 100 meter away from site of cleaning and covering the deposited sludge with minimum 25cm thick layer of earth and spreading unslacked lime on the pit all as specified and directed. |
| 125 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, internal dia of pipe 150 mm, complete all as specifed & directed. |
| 126 | M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate for 150mm dia bore pipes all as per SSR Part-I specifications, complete all as specified and directed. |
| 127 | S&F 150mm diameter DWCPE (SN8) HDPE Pipes laid in trenches on PCC bed including jointing as per manufacturer's instructions and as directed. (Bedding/Haunching and earthwork paid separately under respective items of schedule) |
| 128 | M&L Cutting into existing manholes for connecting new drains (internal dia of pipe 150mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified & directed. |
| 129 | Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan in any type of soil and getting out, complete all as specified & directed. |
| 130 | Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specifed & directed. |
| 131 | Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified & directed. |
| 132 | Dismantling of AC corrugated sheets of any thickness as in roofs including ridge complete all as specified & directed. |
| 133 | S&F , prepainted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering /cladding to wall, fixed with self taping screws complete all as specified & directed. |
| 134 | S&F , prepainted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering /cladding to wall, fixed with self taping screws as in ridge covering. complete all as specified & directed. |
| 135 | Dismantlingwrought iron or mild steel work of any description. complete all as specified & directed. |
| 136 | S&F `Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etcconforming to Fe 410 W (gde E-250) Quality A complete all as specified and directed. |
| 137 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410 W (gde E-250) complete all as specified & directed. |
| 138 | S&F plates (plain or chequered) chennels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachementconforming to Fe 410 W (gde E-250) quality A complete all as specified and directed. |
| 139 | S&F mild steel purpose made bolts of diameter of neck exc 12 mm but n.exc 20 mm with hexagonal or square head one end and screwed the other or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or sqare n.exc 30 cm long complete all as specified & directed. |
| 140 | M&L for cement concrete type B1 (1:2:4) using 20 mm graded as in beams, cantilevers, bressummers, lintls over 1.5 m span complete all as specified and as directed. |
| 141 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup ports, overhangs, etc also spays between floors and beams etc complete all as specified & directed. |
| 142 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia) or securing with clips complete all as specified & directed. |
| 143 | --- ditto ---- & item No. 141 but 5 to 10 mm dia as in stirrups, spacer etc |
| 144 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets any thickness complete all as specified & directed. |
| 145 | M&L for Suspended false ceiling system using 4mm thick high pressure steam cured fibre cement pre-primed textured varient E-board (classic), ISI marked, conforming to IS:14982-2000 over and including GI snap grid frame work for false ceiling, grid size 605 x 605 mm with GI angle of size 24x24mm, main runner ‘T’ of size 24x38mm, secondary runner ‘T’ of size 24x28mm with 6mm GI wire with butterfly clips for leveling, fastners, supports, plugs to walls/joists etc all as per manufacturer’s Instructions, including making holes, cutting chasis and making good existing walls in cement mortar 1:3 or PCC 1:2:4 type B1, complete all as specified and directed. Note : All steel members shall be hot dipped galvanised with zinc coating not less than 120 gm/sqm. complete all as specified & directed. |
| 146 | S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, keys , hinges lock, lock strike plate etc.made out of 1.25mm thick MS sheet including one shop coat of red oxide zinc chrome primer etc complete all as specified and directed . |
| 147 | M&L 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with both face is covered with deco rative face veneer with lipping/frame to match complete all as specified & directed. |
| 148 | S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters open rebated & prepare to receive glass, gauge etc (without sash bars /edges of framing plain chamfered or rounded, fitted with cut and mitred beds for securing glass etc) size of members of shutters as spd in SSR Part-I section-8 clause 8.2 (A). complete all as specified & directed. |
| 149 | S&F for Box type steel windows comprising of tubular frame and shutters made out of 1.25mm thick MS steel tube, factory made, with double side shutters wire gauged shutter and glass glazed shutter (wire and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to F1 frame work, including other fittings, hinges, handles tarred hold fasts PCC blocks etc all as shown on Drawing No CEPZ/TD-354/09 sheet 1/3 to 3/3 including taking down old steel window of any size icluding taking down /up complete all as specified and directed. |
| 150 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads all as spd & directed |
| 151 | S&F Sheet glass, ordinary quality, 3mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified & directed. |
| 152 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (both type) 300mm longh, and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 153 | S&F Aluminium anodised 150mm long barrel tower bolt of extruded section and fixing complete all as specified and directed |
| 154 | Butt hinges 100mm medium weight stainless steel complete all as specified and directed. |
| 155 | S&F Aluminium handles cast type anodised 150mm complete all as specified and directed |
| 156 | M&L PCC 1:3:6 type C - 1 (using 20 mm graded crushed stone aggregate) as in back filling of chowkats and bed blocks for hold fasts etc complete all as specified and directed. |
| 157 | M&L for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with 2nd class soft wooden beadings all as specified and directed |
| 158 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed. |
| 159 | M&L Machine cut kota stone slab flooring/Stair,skirting and dado 20-25mm thick over cement screed bed laid and jointed cement screed bed laidand jointed with grey cemant slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for floor/ tread of staircase over and including15mm thick screed bed in CM 1:6 after roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg cement per sq. metre incl marble strip design complete all as specified & directed. |
| 160 | M&L Machine cut kota stone slab flooring/Stair,skirting and dado 20-25mm thick over cement screed bed laid and jointed cement screed bed laidand jointed with grey cemant slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for floor/ tread of staircase over and including10mm thick plaster in CM 1:4 after roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg cement per sq. metre incl marble strip design complete all as specified & directed. |
| 161 | M&L 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed.(Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning/ corners. |
| 162 | S&F Fancy type drapery rod 20 mm dia fixed to side brackets golden glob fixed in repair complete all as specified and directed. |
| 163 | S&F MS Bracket powder coated for holding curtain rod fixed with screws to walls as approved by Engr-In-Charge fixed in repair complete all as specified and directed. |
| 164 | S&F Fiber fancy dome type corner ends fixed to curtain rod 20mm dia fixed in repair complete all as specified and directed. Please Enable Macros to View BoQ information |
| 165 | S&F Fiber fancy dome type corner ends fixed to curtain rod 20mm dia fixed in repair complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender