Tender For Special Repair To Bldg No P-524 (Cqb) In Wt Area And Provn Of Protective Work For Security Wall Near Gd Pl Area At Ima Dehradun.
Tender Value
44.90 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
3 days left
EMD
89900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-524 (Cqb) In Wt Area And Provn Of Protective Work For Security Wall Near Gd Pl Area At Ima Dehradun.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 3 | M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed. |
| 4 | M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and smooth (without using extra cement) complete all as specified and directed. |
| 5 | M&L for preparation of newly plastered surface of walls including corners and applying two coats of OBD over applying of 1-2 mm thick wall care putty and a coat of primer finish wall surface even & smooth complete all as specified and directed. |
| 6 | M&L for preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of OBD over applying of 1-2 mm thick wall care putty complete all as specified and directed. |
| 7 | M&L for preparation of newly plastered surfaces of walls and applying two coats of weather coat exterior paint over a coat of alkali resistance primer and over a coat of 1-2 mm thick external wall care putty including sanding/grinding complete all as specified and directed. (Work to be carried upto a height of 7.5m). Make : Asian paints Apex (Ultima)/Berger Paints weather coat Glow/Shalimar Paints weather PRO+ |
| 8 | M&L for preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of weather coat exterior paint over applying of 1-2 mm thick external wall care putty complete all as specified and directed. (Work to be carried upto a height of 7.5m). Make : Asian paints Apex Ultima/Berger Paints weather coat Glow/Shalimar Paints weather PRO+ |
| 9 | M&L for vitrified ceramic light shade tiles of size nexc 0.36 sqm and 10 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 10 | M&L for vitrified ceramic light shade tiles of size nexc 0.36 sqm and 10 mm thick, in skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick screed bed in cement mortar (1:4) and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 11 | Taking down chowkhats or frames exc 1.5 sqm and n.exc 4 sqm each (without taking off shutters from the frame) and removing from the site complete all as specified and directed. |
| 12 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed. |
| 13 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners complete as per dirn of Engr-in-Charge. |
| 14 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners complete as per dirn of Engr-in-Charge. |
| 15 | S&F factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be fixed with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per direction of Engineer-in- Charge. Note : Stainless steel butt hinges to be measured and paid separtely. |
| 16 | M&L 35mm thick factory made solid WPC (Wood plastic composite) moulded gauged door shutter (single door piece to be used) with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufacturer instruction complete all as specified and directed. |
| 17 | S&F for stainless steel Butt Hinges 100 mm fixed to steel/wooden shutters with stainless steel screws complete all as specified and directed. |
| 18 | S&F for stainless steel barrel tower bolts 150 mm size fixed with stainless steel screws complete all as specified and directed. |
| 19 | S&F for 150 mm size solid in one piece stainless steel handles fixed with stainless steel screws complete all as specified and directed by Engr-in-Charge. |
| 20 | S&F for stainless steel sliding door bolts of length 250 mm size and fixed with stainless steel screws complete fixed in repair complete all as specified and directed. |
| 21 | M&L for aluminium alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one Nos wire gauged shutter sliding type, with aluminium sections as per Series-B (18mm) 3 track for sliding windows, and glazed with tinted glass coloured glass 5mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type 2 Nos aluminium handle of size 75mm and locking system including aluminium grill of 5mm thick, average width of aperture 50mm and SS wire cloth 0.46mm dia of wire and 1.40 aperture and provision of openable space for AC (where required) with 04 Nos of tower bolt etc. complete all as specified and directed. |
| 22 | S&F aluminium powder coated frame for fixed partition of section 47.62mm x 44.45 x 1.6 mm thick, shutter glazed with tinted glass 5mm thick/AC panel fixed with rubber gasket and aluminium strips as per standard method also rubber gasket at frame so as to make air tight all as per IS 737-1986 complete all as specified and directed. |
| 23 | S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605 mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework including taking down existing boards any thickness etc complete all as specified and directed. |
| 24 | M&L in repair Drapery rod in any length, high strength stainless steel pipe having outer dia 25-28 mm a pair of brackets & a pair of stainless steel finials complete all as specified and directed. |
| 25 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed. |
| 26 | M&L for rubberised precast prepolished coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with grey cement and pigment complete all as specified and directed. |
| 27 | M&L for Sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 28 | M&L for 40 mm thick PCC type B1 1:2:4 (using 20 mm graded stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of existing old concrete complete all as specified and directed. |
| 29 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints and necessary formwork and demolition of existing concrete complete all as directed. |
| 30 | M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed. |
| 31 | M&L for machine cut Kota stone 20 to 25 mm thick in floorings over cement screed base 20 mm thick in CM 1:4 laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and mirror polishing to be matched with existing floor incl demolition complete all as specified and directed. |
| 32 | M&L for machine cut Kota stone 20 to 25 mm thick in skirtings, dado and pillar over cement screed base 10 mm thick in CM 1:3 laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and mirror polishing to be matched with existing floor incl demolition complete all as specified and directed. |
| 33 | M&L for 20mm thick screed bed in cement mortar 1:3 on roof surface finished even and smooth including taking down existing cement plaster including racking out joints,hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 34 | M&L for Roof treatment by applying a coat of cold applied oil based bituminous primer over cleaned surface @ 0.30 Kg/Sqm and laid 3mm thick APP modified five layer polymeric membrane, minimum weight not less then 3.60 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method as per manufacturer's instructions with side overlap of 75mm & end overlap of 100mm & tucked into the chases on vertical surfaces with grooves & make good in cement mortar 1:3, finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab any description, cleaning off all foreign materials by wire brushing, cleaning roof surfaces with water and removal of spoil out side the IMA premises, complete all as specified and directed.Note : Work shall be executed by authorised applicator of manufacturer and upto roof height of triple storied building and 10 years guarantee shall be submitted by the contractor. |
| 35 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in any type of soil for foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as secified and directed. |
| 36 | S&F 4 mm dia galvanised steel wire, 225mm x 150mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling mesh all as directed. |
| 37 | M&L for boulder filling dry, handpacked tightly, as in wire crate apron bunds (Wire crate measured separately) complete all as specified and directed. |
| 38 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. |
| 39 | Taking down existing ceiling fan of any capacity and make serviceable by replacing unsv parts incl down rod as per site equirement and preparation of old painted surface body and blades of ceiling fan of any capacity ,cleaning foreign material ,filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody and refixing at site after compltion of bldg work. |
| 40 | Taking down exhaust fan of any capacity and make serviceable by replacing unsv parts and preparation of old painted surface body and blades of ceiling fan of any capacity ,cleaning foreign material ,filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody and refixing at site after compltion of bldg work. |
| 41 | Taking down old U/S main switches, Sheet metal enclosures DB including MCCBs, MCBs etc including making good to the disturbed surface of wall all as directed. |
| 42 | Taking down old unsv T/L of any size and capacity all as directed. |
| 43 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed. Please Enable Macros to View BoQ information |
| 44 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender