Tender For Provn Of Defi Exhaust Fans, Desert Coolers And Geysers At Ajmer Mil Station Under Ge Nasirabad
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Nov 2026
6 days left
EMD
87500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ajmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Defi Exhaust Fans, Desert Coolers And Geysers At Ajmer Mil Station Under Ge Nasirabad
BOQ
| Sl. No. | Item Description |
| 1 | Supply & installation Evaporative Desert cooler having nominal air flow capacity of 6000 CFM, electric driven suitable for single phase, 230 volts, AC 50 Hz complete body of size 100 X 100 X 80 cm (approx L*W*H) fabricated with 20 guage plain mild steel galvanised sheet, with wood wool pads having nominal air flow capacity of 6000 CFM, having cooler fan motor with 100% copper winding of capacity 750 watt/1400 rpm approx with 18'' metal blade size, and submersible pump of capacity 1.5 m head, complete cooler body powder coated, with all fittings and fixtures with M & L for fabrication of mild steel cooler stand of size 70 X 80 X 90 cm (L*W*H) fabricated with angle iron of 35 X 35 X5 mm, conforming to Fe-290 Gde E-165, including cutting, welding, cross support in upper side and lower side with flat iron of size 35 X5 mm as directed or grauting (if required) including two coat black paint synthetic enamel paint over a coat of red oxide primer fixed at location complete all as specified and directed |
| 2 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, Blades, and frame and louvers including M&L for core cutting of proper size in wall of any type including PCC work and making good surface complete all as specified and directed |
| 3 | Supply and fix BLDC exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m including M&L for core cutting of proper size in wall of any type including PCC work and making good surface complete all as specified and directed |
| 4 | S&F installation, testing and commissioning of water heater storage type, electric suitable for single phase ,50HZ, AC supply, stainless steel inner assembly, 2 KW heating element, Twin thermostat for water temperature and safety thermostat stove enamel outer body steel with two sets of chromium plated adopter at each end suitable for 15mm bore GI pipe at cold water inlet and copper tubing connection with chromium plated adopter at ends, at hot water outlet, with safety fusible plug confirming to relevant IS of 50 ltrs capacity 5 star rated fixed and testing including fixing arrangement and Stainless steel connection pipes 36\\" 02 nos complete all as specified and directed Make:- Havells/Venus |
| 5 | M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for One 3 pin 5 Amp socket on independent board complete all as specified and directed |
| 6 | S&F switch piano flush type 5 amps, single pole one way 240 volts complete all as specified and directed |
| 7 | S&F Socket outlet 3 Pin 5/6 Amp flush type complete all as specified and directed |
| 8 | Supply & fix GI Tubes 15 mm dia medium grade with all fittings and fixed complete to walls/floors/trenches complete all as specified and directed |
| 9 | Supply and fixing stop valve brass CP high pressure both ends screwed for iron pipe of size 15 mm dia complete all as specified and directed |
| 10 | Supply and fixing Bib tap brass CP screwed for iron pipe of size 15 mm bore complete all as specified and directed. Please Enable Macros to View BoQ information |
| 11 | Supply and fixing Bib tap brass CP screwed for iron pipe of size 15 mm bore complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender