Tender For Special Repair/Replacement Of Pre-Painted Galvanized Iron (Ppgi) Sheets, Iron Trusses And Re-Wiring In Building Number T-44, T-146, T-155, T-159, T-198, T-199 And T-200 At Patiala Under Ge (N) Patiala
Tender Value
72.13 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
22 days left
EMD
1.33 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/Replacement Of Pre-Painted Galvanized Iron (Ppgi) Sheets, Iron Trusses And Re-Wiring In Building Number T-44, T-146, T-155, T-159, T-198, T-199 And T-200 At Patiala Under Ge (N) Patiala
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of wall and ceiling board (fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed by Engineer-in-charge. |
| 2 | Supply and fixing GI framework for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channnel 0.9 mm thick having two equal flanges of 15mm each web of 45 mm suspended from soffit at approx 900 mm centre to cenmtre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channnel with connecting clips across the intermediate channel at 457 mm centre to centre includinghanger 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 size 60 mm long and expansion hold fasteners 12.5mm dia 40 mm long complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Material and labour for 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with Screws complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Taking down cement mortar plastering on brick or stone walls and concrete surface etc. including raking out joints,hacking for key,scrubbing down with water etc.complete all as specified and as directed by Engineer-in-charge. |
| 5 | Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth ( without using extra cement ) complete all as specified and as directed by Engineer-in-charge. |
| 6 | Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth ( without using extra cement ) complete all as specified and as directed by Engineer-in-charge. |
| 7 | Material and labour for rendering 5mm thick in cement mortar 1:3 on concrete surfaces, as in ceilings etc finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.. |
| 8 | Material and labour preparation of new plastered surface of walls and 1.5 mm thick wallcare puty to achieve smooth surface and applying two coats of oil bound distemper over and including a coat of primer complete all as specified and as directed by Engineer-in-charge. |
| 9 | Material and labour preparing new plastered or unplastered surface of walls and applying two coats of cement base paint over and including a coat of cement primer complete all as specified and as directed by Engineer-in-charge. |
| 10 | Material and labour for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-charge. |
| 11 | Demolition of Brick work or stone/boulder masonary including all quoins,arches,pillars etc,built in cement mortar or cement lime mortar complete all as specified and as directed by Engineer-in-Charge. . |
| 12 | Material and labour for brick work using old size sub class 'B' bricks straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6complete all as specified and as directed by Engineer-in-charge. |
| 13 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm including cutting holes in brick work built in cement mortar of required size for inserting hold fast for new frame and making good the disturbed surface to match the existing surface complete all as specified and as directed by Engineer-in-charge |
| 14 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm including cutting holes in brick work built in cement mortar of required size for inserting hold fast for new frame and making good the disturbed surface to match the existing surface complete all as specified and as directed by Engineer-in-charge |
| 15 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frame/Chowkhat of size 85 x 45 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 16 | All as per serial item No. 15 here-in-before but frame size 65x125mm single rebate.complete all as specified and as directed by Engineer-in-charge |
| 17 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screwscomplete all as specified and as directed by Engineer-in-Charge. |
| 18 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type plain wiremesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk)and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. For fixing stainless steel 304 Grade wire cloth (wire dia. 0.56mm) and Expanded aluminium mesh, wire dia 1.20 mm thickness and mesh aperture size 38x20mm (LWxSW) combinly panel panel area of door excpet stiles and rail to be panelled with mesh wih self tapping round headed screws at requried distance,scres and edges covered with feathered pvc edge beading all round of mesh and WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Supply and fixing 100 mm size Stainless Steel (304 Grade) Butt hinges complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply and fixing powder coated aluminium hook and eye of suitable length adjustable to aluminium window shutters complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Material and labour Steel Window Box type factory made using ERW 'P' Section comprising Double Frame for Gauged and Glazed Skeleton Shutter jointed internally with Flat Iron 40x3mm complete including Mild Steel sower Bolts, Hinges, Handle, Stops, Lugs including GI Steel Wire Cloth (0.36mm) aperture, Glazing/ Glass(3mm), etc. incluidng painting two coat over a coat of primer complete all as directed. Outer Section of Frame should be 50x25mm and Inner Section should be 40x20mm complete all as specified and as directed by Engineer-in-Charge.Notes :-(a) For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit.(b) Cost of Iron Mongery as ordered/required at Site, GI Steel Wire Cloth will deem to be included in the Quoted Unit Rate.(c) Guard Bars are included in the Quoted Unit Rate. Spacing of 10mm Square Bar will be 10 Cm Centre to Centre. |
| 22 | Supply and fixing extruded Brass handles size 150 mm , fabricated type polished complete all as specified and as directed by Engineer-in-charge. |
| 23 | Supply and fixing Brass barrel tower bolts,200 mm long with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Supply and fixing Brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 250mm complete all as specified. |
| 25 | Supply and fixing brass , sliding door bolt 300 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Supply and fixing floor door sotpper of aluminium alloy body and tongue with hard drawn steel spring overall width of cover plate 140 mm fixed in floorcomplete all as specified and as directed by Engineer-in-Charge. |
| 27 | Supply and fixing for anodised powder coated ( Thickness of power coating not less than 50 micron) aluminium ventilator frame fixed type, aluminium section weighing not less than 0.55 Kg/m, half bottom portion fixed with 4mm thick glass, lower stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and as directed by Engineer-in-Charge. |
| 28 | Supply and fixing Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Demolition of cement concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-Charge. |
| 30 | Material and labour for 75 mm thick Cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate ) as a Plinth protection finished even and smoot w/o using extra cement forming 10 mm wide joints and filling the joints with sealing compound grade',A' complete all as specified and as directed by Engineer-in-Charge. . |
| 31 | Dismantling floor ,hearth or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Dismantling of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc complete all as specified and as directed by Engineer-in-Charge. |
| 33 | Material and labour for machine cut kota stone slab 18-20 mm thick as in flooring, laid over and including 20 mm thick screed bedding in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.Notes : (i). All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained.(ii). The colour of the slabs shall be uniform. |
| 34 | Material and labour for Machine cut kota stone slab flooring 18-20mm thick in riser of steps, skirting, dado, window cill and pillar laid over 10mm thickrendering in cement mortar 1:4 etc, and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Material and labour for Non-skid ceramic colouerd tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc.set and jointed withn neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge. |
| 36 | Material and labour for 7-to 8mm ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mmx 7-8 mm thick, in any pattern of light & dark/highlighters etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in neat cement slurry laid over & including 10 mm thick rendering in mortar (1:4) and pointed in white cement mixed with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge. |
| 37 | Material and labour fo Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 38 | Material and labour for Machine cut cudappa stone slab 20 - 25 mm thick laid over and including screed base 20 mm thiclk in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge. |
| 39 | Material and labour for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for laying floor finishes complete all as specified and as directed by Engineer-in-Charge. |
| 40 | Material and labour for 25mm thick cement concrete 1:2:4, type B 0 using 12.5 mm graded stone aggregate as in floor finished rough complete all as specified and as directed by Engineer-in-Charge. |
| 41 | Material and labour for cement concrete 1:4:8, type D-2 using 40 mm graded stone aggretgate as in sub-floor, sub-bases,floors and paving etc complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Material and labour for cement concrete tiles with grey cement and pigment 25 cmx25 cm x 22 mm thick ,machine pressed; set jointed and pointed in neat cement slurry in floors cut and polishsed laid over and including 15mm thick scered bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge., |
| 44 | Supply and fixing in repair Angular Stop Cock, cast copper alloy fancy type chromium plated , screwed down, high pressure,with crutch or butterfly handle, screwed both ends for 15mm bore dia iron pipe or for union and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Supply and fixing in repair bib taps, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down,screwed for 15mm bore dia iron pipe or for brassferrule and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 46 | Supply and fixing in repair brass chromium plated mixer for mixing hot & cold water screwed down for 15 mm bore dia iron pipe complete all as specified and as directed by Engineer-in-Charge |
| 47 | Supply and fixing in repairs vitreous china wash basin oval shape, white, flat back, size 580 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with brass chromium plated waste fitting including 32 mm bore waste pipe complete all as specified and as directed by Engineer-in-Charge |
| 48 | Supply and fixing 32 mm bore low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed by Engineer-in-Charge |
| 49 | Supply and fixing in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flangescomplete all as specified and as directed by Engineer-in-Charge |
| 50 | Supply and fixing in repais Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe ) including provision of lime concrete complete all as specified and as directed by Engineer-in-Charge |
| 51 | Supply and fixing PVC ( SWR ) floor trap, plain dia oof outlet 75 mm with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge |
| 52 | Supply and fixing in repair PVC connection 15mm size with PTMT nuts of length 600mm long complete all as specified and as directed by Engineer-in-Charge |
| 53 | Taking up or down existing steel tubing15 mm bore dia including connections and removing from site complete all as specified and as directed by Engineer-in-Charge |
| 54 | Taking up or down existing steel tubing 20 mm bore dia including connections and removing from site complete all as specified and as directed by Engineer-in-Charge |
| 55 | Supply and fixing/laying CPVC pipe SDR11 outer dia 20 mm pipe & plain CPVC SDR 11 fitting, on walls/ ceiling or laying in floor complete all as specified and as directed by Engineer-in-Charge |
| 56 | Dismantling water tanks capacity exc 500 & not exc 1000 llitres and removing to store complete all as specified and as directed by Engineer-in-Charge |
| 57 | Supply and and fixing,rotational moulded polythylene watwr storage tank ( cylindrical vertical with closed top) ,1000 ltr capacity hoisted and fixed in position including provision of Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20 mm bore dia iron pipe and fixed.(Minimum weight 20mm-210gms) complete all as specified and as directed by Engineer-in-Charge |
| 58 | Supply and fixing in repair 20mm Gun metal globe/Gate valve, with iron wheel head , screwed both ends fo 20 mm bore dia iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 59 | Supply and fixing shelf of PTMT fixed with and including chromium plated brass screws and s and wooden/plastic cleats ( minimum weight-300gms) complete all as specified and as directed by Engineer-in-Charge |
| 60 | Supply and fixing in repair PVC valveless syphonic action type, low level,flushing cistern of PVC 10 litres with dual flushing system,white/ivory/off white with inlet, ball valve, float and handle including brackets and making connection to pipe etc. complete all as specified and as directed by Engineer-in-Charge |
| 61 | Supply and fixing 600x450 mm bevelled edge mirror of slected quailty glass, mounted on 6 mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated screws and cup washers complete all as specified and as directed by Engineer-in-Charge |
| 62 | Material and labour for mild steel framed work such as grills, gratings, etc with ends of bars,shouldered and /or riveted, or forged into spikes, framed guard bars, ladders, framed balusters, walk ways, railings, framework of water tank and similar work conforming to Fe 290. Gde-E-165 complete all as specified and as directed by Engineer-in-Charge |
| 63 | Supply and fixing Anodised aluminium frame for doors, windows,ventilators & Partation powder coated ( minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing, etc. complete all as specified and as directed by Engineer-in-Charge |
| 64 | Supply and fixing sheet glass 4.00 mm thick ordinary quality and glazing with oil putty in square exc 0.50Sqm in each panescomplete all as specified and as directed by Engineer-in-Charge. |
| 65 | Material and labour for removing the existing treatment from walls,preparing the surface and providing 1.5 mm thick wall care putty to achieve the smooth surface and applying two coats of distemper oil emulsion oover a coat of primer complete all as specified and as directed by Engineer-in-Charge |
| 66 | Material and labour for preparation of new or previously untreated wood and wood based surfaces of any description, not ottherwise described, over 10 cm width or girth and applying two coat of synthetic enamel ( ordinary tint ) over and including a coat of pink primer complete all as specified and as directed by Engineer-in-Charge |
| 67 | Material and labour for preparation of plastered or unplastered surfaces of walls and applying two coats of cement based paint over and including a coat of primer etc complete all as specified and as directed by Engineer-in-Charge |
| 68 | Dismantling of asbestos cement corrugated/semi corrugated sheet in roof coverings complete all as specified and as directed by Engineer-in-Charge |
| 69 | Dismantling of timber scantling 40 sqcm and over in section framed work in any position complete all as specified and as directed by Engineer-in-Charge |
| 70 | Material and labour for Clean sawn 2nd class hard wood (Timber) in scantlings complete all as specified and as directed by Engineer-in-Charge |
| 71 | Supply and fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240.complete all as specified and as directed by Engineer-in-Charge |
| 72 | Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge |
| 73 | Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 74 | Material and labour for preparation of wood and wood based materials, new or old, of any descripion and girth, not otherwise described and treated with two coats of creosote complete all as specified and as directed by Engineer-in-Charge |
| 75 | Material and labour for preparation of new or previously untreated steel or iron surfaces of any description, not ottherwise described, over 10 cm width or girth and applying two coat of synthetic enamel over and including a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge |
| 76 | Supply and fixing in repair Stainless steel curtain rod of 20 mm inner dia including decorative finial at both ends and pair ofSS steel brackets fixed at both ends with PVC rawl plug & steel screws complete all as specified and as directed by Engineer-in-Charge |
| 77 | Supply and fixing Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings complete all as specified and as directed by Engineer-in-Charge |
| 78 | Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawings complete all as specified and as directed by Engineer-in-Charge. |
| 79 | Dismantling of PVC Pipes with fittings from 75 mm to 110mm bore dia complete all as directed by Engineer-in-charge. |
| 80 | Supply and fixing for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on wall ccomplete all as specified and as directed by Engineer-in-Charge |
| 81 | Supply and fixing for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and as directed by Engineer-in-Charge. |
| 82 | Supply and fixingr PVC(SWR) bend any radius for f 110 mm bore dia pippe complete all as specified and as directed by Engineer-in-Charge. |
| 83 | Supply and fixing mild steel framed work as in doors or gates of angle or other section with gusset plate, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks or steel hanging doorv fitting and hanging also fastening and fixing complete steel confirming to Fe-410-W (Gde-E250) complete all as specified and as directed by Engineer-in-Charge. |
| 84 | Material and labour for providing and laying Premium (1st) quality straight edge, ceramic tiles exterior grade scratch resistance of size 300x300x7 to 8 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc set and jointed in neat cement slurry laid over and including 15 mm thick screed bed in cement mortar (1:4) and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and as directed by Engineer-in-Charge. |
| 85 | Material and labour for machine pressed precast interlocking paver blocks with ggey cement and pigment any shape and size confirming to IS-15658-2006 of 60 mm thickness,m-35 Grade complete all as specified and as directed by Engineer-in-Charge.d. |
| 86 | Material and labour for sand filling under floor for cushioning including filling the joints ccomplete all as specified and as directed by Engineer-in-Charge. |
| 87 | Taking down carefully existing unserviceable bitumen felt (any number of layers) including plaster of any thickness, and wire brushing and cleaning the surface of roof terraces including flashing and junctions of parapets kerb wall,CC fillets,benching etc and removing taken down material out of MOD land complete all as specified and as directed by Engineer-in-Charge. |
| 88 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge. |
| 89 | Supplied only liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge. |
| 90 | Material and labour for providing plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as roof, kerb, or mud stops,rounded or chamfered on edges etc complete all as specified and as directed by Engineer-in-Charge. |
| 91 | Material and labour for rendering 10 mm thick CM (1:4) on roof slab, mixed with liquid water proofing compound as per manufacrurers instructions finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.. Note: Water Proofing liquid shall be measured and paid separately. |
| 92 | Material and labour for providing and laying APP based polymeric membrance minimum weight 3kg/sqm and minimum 3 mm thick reinforced withpolyster non woven fabric ( wt n.less than 150 gms/sqm) landed on primed surface applied @ .40 kg/sqm by forced application complete all as specified and as directed by Engineer-in-Charge. |
| 93 | Supply and fixing in repairs Vitreous china wash down water closet pan ( pedestal pattern ) white ( excluding fixing bolt, flushing cistern and flush pipe ) complete all as specified and as directed by Engineer-in-Charge. |
| 94 | Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m in deep for foundations, laying cable,pipe etc and getting out as in soft/loose soil complete all as specified and as directed by Engineer-in-Charge. |
| 95 | Demolition by breaking up drain pipes salt glazed stone ware pipe, AC or reinforced concrete of internal dia 150 mm jointed in cement mortar and taking out of from trenches removing the debries from site complete all as specified and as directed by Engineer-in-Charge |
| 96 | Material and labour for laying reinforced concrete pipes 150 mm bore, class NP3, laid and jointed complete with collars in cement mortar (1:1) complete all as specified and as directed by Engineer-in-Charge. |
| 97 | Material and labour for cement concrete type D-2 1:4:8 using 40mm graded stone aggregates for bed to 150 mm bore drain pipes including forming cradels complete all as specified and as directed by Engineer-in-Charge. |
| 98 | Material and labour for mirror polishing on marble / granite / kota stone /whereever required to give high gloos ginish complete all as directed by Engineer-in-charge. |
| 99 | Returning, filling in soft /loose soil including spreading, levelling, water and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed by Engineer-in-Charge. |
| 100 | Removing of excavated material (soil) n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed by Engineer-in-Charge. |
| 101 | Material and labour for Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and as directed by Engineer-in-Charge. |
| 102 | Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling etc complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 103 | Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling etc complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender