Tender For Special Repair/Replacement Of Lt Ug Cables And Connected Items At Nsry (Svp) Under Ge Haddo, Sri Vijaya Puram
Tender Value
44 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
16 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/Replacement Of Lt Ug Cables And Connected Items At Nsry (Svp) Under Ge Haddo, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Material and Labour for cutting existing BT / PCCroad of size 45cm x 60cm for taking out/laying of underground cable/pipe and including necessary earth work and refilling the same in layers well ramming including watering as required and matching with the existing surface with 200mm thick PCC 1:2:4 type B1 and curing the same with wet gunny bags and removing debris to a distance not less than 50m complete all as specified and as directed . |
| 2 | Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3½ core x 400 sqmm (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge. |
| 3 | Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3½ core x 300 sqmm (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge. |
| 4 | Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3½ core x 240 sqmm (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge. |
| 5 | Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3½ core x 185 sqmm (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge |
| 6 | Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3½ core x 150 sqmm (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge |
| 7 | Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3½ core x 120 sqmm (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge |
| 8 | Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3½ core x 95 sqmm (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge |
| 9 | Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3½ core x 70 sqmm (laid in trenches, ducts, pole, wall etc.) complete all as specified and directed by engineer in charge |
| 10 | Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3½ core x 50 sqmm (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge |
| 11 | Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3½ core x 35 sqmm (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge |
| 12 | Supply, laying, testing and commissioning of LT XLPE insulated, sheathed, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of size 3½ core x 25 sqmm (laid in trenches, ducts, pole, wall etc.) complete all as specified and as as directed by engineer in charge |
| 13 | Supply and laying HDPE DWC pipe of size 120mm (OD) x 103mm (ID) along with connected accessories like couplers, bends, end caps etc. for LT/ HT cable protection complete all as specified and as directed by engineer in char |
| 14 | Supply and laying HDPE DWC pipe of size 77mm (OD) x 63mm (ID) along with connected accessories like couplers, bends, end caps etc. for LT/ HT cable protection complete all as specified and as directed by engineer in charge. |
| 15 | Supply and laying HDPE DWC pipe of size 50 mm (OD) x 38 mm (ID) along with connected accessories like couplers, bends, end caps etc. for LT/ HT cable protection complete all as specified and as directed by engineer in charge. |
| 16 | Excavation in trenches not exc 1.5 M deep and 1.5 M width and getting out in soft or loose soil for foundation of poles (or) cable laying complete all as specified and directed |
| 17 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soils complete all as specified and directed. |
| 18 | Removing/excavated soil to a distance not exc 50 M and depositing where directed at a level not exc 1.5 M above the starting point all as specified and directed. |
| 19 | Material & labour for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete all as specified and directed. |
| 20 | Material and Labour for lifting the RCC slab, approximate length (2 to 4.5m) x width (1 to 2m) and upto 300 mm thick and about 3.0 to 5.0 ton in weight on IN Jetty by lifting of suitable slab with in 10 to 15m of length as per site condition by cutting/chipping the clearance, groove all around, keeping aside using a crane for laying of LT/HT cables or removing and relaying after fault rectification and replacing RCC slab at the same location after carrying out repairs including making good the surface with pack 1:2:4 complete all as specified and directed. Note: Two to three Nos of slab shall be taken out/ removed as per site condition for laying of cables/ earth strip in the cable duct of Jetty after for a span of 15 to 20 meters or as per site requirement. |
| 21 | Supply & lay GI Pipe 100 mm medium grade in the trench crossings/obstructions for cable protection, including taking down old pipe one all as specified & directed. |
| 22 | Taking down old unserviceable LT UG cable size 25 sqmm to 185 sqmm all as specified and directed by Engr_In-Charge. |
| 23 | Taking down old unserviceable LT UG cable size 240 sqmm to 400 sqmm all as specified and directed by Engr_In-Charge. |
| 24 | Disconnecting the old HT/LT UG cable of size 95 to 400 sqmm and draw out from the pipe undermeath and in the drain and ground and power house. LT cable after check the meggering found the unserviceable remove the site and which found the serviceable relaying the same with proper clamping and necessarry all as specified and directed by engr in charge. |
| 25 | Supply, connect and testing for straight though joints for 1100volts grade of LT UG cables of size 3½ core 25 to 50 sqmm including taking out old joint complete all as specified & directed. |
| 26 | Supply, connect and testing for straight though joints for 1100volts grade of LT UG cables of size 3½ core 70 to 95 sqmm including taking out old joint complete all as specified & directed. |
| 27 | Supply, connect and testing for straight though joints for 1100volts grade of LT UG cables of size 3½ core 120 to 150 sqmm including taking out old joint complete all as specified & directed. |
| 28 | Supply, connect and testing for straight though joints for 1100volts grade of LT UG cables of size 3½ core 185 to 240 sqmm including taking out old joint complete all as specified & directed. |
| 29 | Supply, connect and testing for straight though joints for 1100volts grade of LT UG cables of size 3½ core 300 to 400 sqmm including taking out old joint complete all as specified & directed. |
| 30 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping of pole including use & waste of necessary form work including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as as directed by engineer in charge. |
| 31 | Material & labour for laying of chequered plates of any thickness by cutting / making in to the shape providing necessary angular supports and handles with 6 mm dia rod as per the site condition for cable trenches of various sub-stations alongwith painting of two coat of synthetic enamel over a coat of of redoxide all as specified and directed. |
| 32 | M&L in constructing cable trench with 230 mm thick or more block masonry in cement mortar 1:6, for LT underground cables, of minimum internal width 600 mm and depth 600 mm, including excavation in ordinary soil, dressing and levelling of trench bottom, providing and laying brick masonry in required alignment and levels, forming necessary corners, junctions and openings, including all labour, materials, scaffolding, curing and incidental works, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender