Tender For Repair, Polishing And Painting Of Wooden , Steel Furniture And Tp Furniture Of Various Units Under Garuda At Naval Base Under Ge(Nw) Kochi
Tender Value
44.80 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
18 days left
EMD
89600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Polishing And Painting Of Wooden , Steel Furniture And Tp Furniture Of Various Units Under Garuda At Naval Base Under Ge(Nw) Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Recaning the worn out and unserviceable plastic cane from the furniture items and carry out recanning as per Godrej pattern using white/coloured cane having minimum width of 2.38mm and 0.4mm thick, half round gola type, weighing not less than 6gm per RM, incl making provn of an additional strand i.e 3 strand in place of two for the centre holes when the total span of caning work exceeding 350mm, complete all as specified and as directed by the Engineer in charge for Chair Dining -Drg No : FD-224.General Notes for Item Nos 1 to 5Canning seat and back of chairs of all types shall carryout with 2 mm wide for general caning work and border/periphery caning work with 3 mm wide plastic cane white/cream color weight of cane not less than 0.250 kg/100 RM including removing old damaged cane(caning shall be in Godrej patttern) all as shown on respective drawings and specified and directed by the Engineer-in-charge. |
| 2 | All as per item No 01 here-in-before but for chair Easy (Seat and back) Drg No : FD-229/201 |
| 3 | All as per item No01 here-in-before but for chair Verandha (Seat and back) Drg No : FD-19/256/359 |
| 4 | All as per item No 01 here-in-before but for stool dressing CB (Seat only) Drg No : FD-27 & FD 280 |
| 5 | All as per item No 01 here-in-before but for chair Writing/CBA Office (Seat only) Drg No : FD-250 & FD-280 |
| 6 | Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair dining all as specified and as directed by the Engineer-in-Charge.(Drg No. FD-279) |
| 7 | Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair writing all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-280) |
| 8 | Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair Easy all as specified and as directed by the Engineer-in-Charge(Drg No.FD-229 ) |
| 9 | Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finnished and polished fully including tightening of the frame work for Sofa single seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-258) |
| 10 | Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood)duly finished and polished fully including tightening of the frame work for Sofa two seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-373) |
| 11 | Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood)duly finished and polished fully including tightening of the frame work for Sofa three seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-281) |
| 12 | Material and labour for removing the unserviceable/broken front leg and providing new one with First class hard wood (teak wood)duly finished and polished fully including tightening of frame work for Chair dining all as specified and as directed by the Engineer-in-Charge(Drg No.FD-279) |
| 13 | Material and labour for removing the unserviceable/broken front leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair writing all as specified and as directed by the Engineer-in-Charge(Drg No.FD-280) |
| 14 | Material and labour for removing the unserviceable/broken front leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair Easy all as specified and as directed by the Engineer-in-Charge(Drg No.FD-229) |
| 15 | Material and labour for removing the unserviceable/broken front leg and providing new one with First class hard wood (teak wood)duly finished and polished fully including tightening of the frame work for Sofa single seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-258) |
| 16 | Material and labour for removing the unserviceable/broken front leg and providing new one with First class hard wood (teak wood)duly finished and polished fully including tightening of the frame work for Sofa two seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-373) |
| 17 | Material and labour for removing the unserviceable/broken front leg and providing new one with First class hard wood (teak wood)duly finished and polished including tightening of the frame work for Sofa three seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-281) |
| 18 | Material and labour for removing the unserviceable/ broken wooden back rest and providing new one with first class hard wood (teak wood) duly finished and polished fully including fixing and tightening the frame work for Chair dining all as specified and as directed by the Engineer-in-Charge(Drg No.FD-279) |
| 19 | Material and labour for removing the unserviceable/ broken wooden back rest and providing new one with first class hard wood (teak wood) duly finished and polished fully including fixing and tightening the frame work for Chair writing all as specified and as directed by the Engineer-in-Charge(Drg No.FD-280) |
| 20 | Material and labour for removing the unserviceable/ broken wooden back rest and providing new one with first class hard wood (teak wood)duly finished and polished fully including fixing and tightening the frame work for Chair Easy all as specified and as directed by the Engineer-in-Charge(Drg No.FD-229) |
| 21 | Material and labour for removing the unserviceable/ broken wooden back rest and providing new one with first class hard wood (teak wood) duly finished and polished fully including fixing and tightening the frame work for Sofa single/two/three seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-258) |
| 22 | Material and labour for removing the unserviceable broken/ wooden side rails of chairs and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Chair dining all as specified and as directed by the Engineer-in-Charge(Drg No.FD-279) |
| 23 | Material and labour for removing the unserviceable broken/ wooden side rails of chairs and providing new one with first class hard wood (teak wood) (each piece) duly finished and polished fully including fixing and tightening the frame work for Chair writing all as specified and as directed by the Engineer-in-Charge(Drg No.FD-280) |
| 24 | Material and labour for removing the unserviceable broken/ wooden side rails of chairs and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Chair Easy all as specified and as directed by the Engineer-in-Charge(Drg No.FD-229) |
| 25 | Material and labour for removing the unserviceable broken/ wooden side rails of peg table and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Peg Table all as specified and as directed by the Engineer-in-Charge(Drg No.FD-277 & FD-384) |
| 26 | Material and labour for removing the unserviceable broken/ wooden side rails of teapoy and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Teapoy all as specified and as directed by the Engineer-in-Charge(Drg No.FD-278) |
| 27 | Material and labour for removing the unserviceable broken/ wooden side rails of table centre and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Table centre all as specified and as directed by the Engineer-in-Charge(Drg No.FD-274) |
| 28 | Material and labour for removing the unserviceable broken/ wooden side rails of Table with drawer 900x600mm and providing new one with first class hard wood (teak wood) (each piece) duly finished and polished fully including fixing and tightening the frame work for Table with drawer 900x600mm all as specified and as directed by the Engineer-in-Charge(Drg No.FD-283) |
| 29 | Material and labour for removing the unserviceable broken/ wooden side rails of tables and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished including fixing and tightening the frame work for Table without drawer 900x600mm all as specified and as directed by the Engineer-in-Charge(Drg No.FD-284) |
| 30 | Material and labour for removing the unserviceable broken/ wooden stiffeners and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Chair dining all as specified and as directed by the Engineer-in-Charge(Drg NoFD-279) |
| 31 | Material and labour for removing the unserviceable broken/ wooden stiffeners and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Chair writing all as specified and as directed by the Engineer-in-Charge(Drg No.FD-280) |
| 32 | Material and labour for removing the unserviceable broken/ wooden stiffeners and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Table 3'x 2' all as specified and as directed by the Engineer-in-Charge(Drg No.FD-55) |
| 33 | Material and labour for removing the unserviceable broken/ wooden stiffeners and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Table writing all as specified and as directed by the Engineer-in-Charge(Drg No.FD-275) |
| 34 | Material and labour for removing the unserviceable broken/ wooden stiffeners and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Table 900x600mm with out drawer all as specified and as directed by the Engineer-in-Charge(Drg No. FD-284) |
| 35 | Material and labour for removing the unserviceable broken/ wooden stiffeners and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Table 900x600mm with drawer all as specified and as directed by the Engineer-in-Charge(Drg No. FD-283) |
| 36 | Material and labour for removing the unserviceable / broken/ damaged hand rest of wooden chairs and providing new one with First class hard wood (teak wood) duly finished and polished fully hand rest and fixing and tightening the frame work for Chair writing all as specified and as directed by the Engineer-in-Charge (Drg No.FD-280) |
| 37 | Material and labour for removing the unserviceable / broken/ damaged hand rest of wooden chairs and providing new one with First class hard wood (teak wood) duly finished and polished hand rest and fixing and tightening the frame work for Chair Easy all as specified and as directed by the Engineer-in-Charge(Drg No.FD-229) |
| 38 | Material and labour for removing the unserviceable / broken/ damaged hand rest of wooden chairs and providing new one with First class hard wood (teak wood) duly finished and polished hand rest and fixing and tightening the frame work for Sofa wooden of different types all as specified and as directed by the Engineer-in-Charge(Drg No.FD-258 , FD-281 & FD-373) |
| 39 | Material and labour for removing the unserviceable/ broken/ damaged legs of peg tables and providing new one with first class hard wood (teak wood) duly finished and polished legs and re-fitting/tightning the frame work for Peg Table all as specified and as directed by the Engineer-in-Charge(Drg No.FD-277 & FD-384) |
| 40 | Material and labour for removing the unserviceable/ broken/ damaged legs of teapoy and providing new one with first class hard wood (teak wood) duly finished and polished legs and re-fitting/tightning the frame work for Teapoy all as specified and as directed by the Engineer-in-Charge(Drg No FD-278) |
| 41 | Material and labour for removing the unserviceable/ broken/ damaged legs of table centre and providing new one with first class hard wood (teak wood) duly finished and polished legs and re-fitting/tightning the frame work for Table Centre(Drg No.FD-274) |
| 42 | Material and labour for removing the unserviceable/ broken/ damaged legs of tables and providing new one with first class hard wood (teak wood)duly finished and polished legs and re-fitting/tightning the frame work for Table writing all as specified and as directed by the Engineer-in-Charge(Drg No.FD-275) |
| 43 | Material and labour for removing the unserviceable/ broken/ damaged legs of tables and providing new one with first class hard wood (teak wood) duly finished and polished legs and re-fitting/tightning the frame work for Table dining with L shaped metal clamps and corner support all as specified and as directed by the Engineer-in-Charge(Drg No.FD-273) |
| 44 | Material and labour for removing the unserviceable/ broken/ damaged legs of tables and providing new one with first class hard wood (teak wood) duly finished and polished legs and re-fitting/tightning the frame work for Table with or with out drawer 900x600mm all as specified and as directed by the Engineer-in-Charge(Drg No. FD-284) |
| 45 | Material and labour for removing the unserviceable/broken /demaged legs and supports of hard beds and providing new one and re-assembling and tightning the frame work for Legs ,with L shaped metal clamps and corner support of hard bed made out of Ist class hard wood (teak wood)duly finished and polished fully all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-246) |
| 46 | Material and labour for removing the unserviceable/broken /demaged parts of hard beds and providing new one and re-assembling and tightning the frame work for Long rails and also providing additional support with L shaped metal clamps for hard bed made out of IInd class hard wood duly finished and polished all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-246) |
| 47 | Material and labour for removing the unserviceable/broken /demaged parts of hard beds and providing new one and re-assembling and tightning the frame work for Ply wood top 12 mm thick for hard bed of size 6'x3' commerical grade ISI marked all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-246) |
| 48 | Material and labour for removing the unserviceable/damaged plywood covering of head board of hard beds and providing new one with 4mm thick OST plywood for Hard bed (Head board) and fiited with teak wood beeding all over and all as specified and as directed by the Engineer-in-Charge(Drg No.FD-246) |
| 49 | Material and labour for removing the unserviceable/damaged plywood covering of foot board of hard beds and providing new one with 4mm thick OST plywood for Hard bed (Foot board) and fiited with teak wood beeding all over and all as specified and as directed by the Engineer-in-Charge(Drg No.FD-246) |
| 50 | Removing the unserviceable/damaged top of Table dining 8 persons and providing new top with 18mm thick pre-laminated particle board exterior grade OST face with teak wood beading and fixing to the frame work including polishing all as specified and as directed by the Engineer-in-Charge{Drg No. FD-273 ) |
| 51 | Removing the unserviceable/damaged top of Table dining 6 persons and providing new top with 18mm thick pre-laminated particle board exterior grade OST face with teak wood beading and fixing to the frame work including polishing all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-239, FD-30 & FD-272} |
| 52 | Removing the unserviceable/damaged top of Table 900mm x 600mm with and without drawer and providing new top with 18mm thick pre-laminated particle board exterior grade OST face with teak wood beading and fixing to the frame work including polishing all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-231 & FD-284} |
| 53 | Removing the unserviceable/damaged top of Teapoy and providing new top with 18mm thick pre-laminated particle board exterior grade OST face with teak wood beading and fixing to the frame work including polishing all as specified and as directed by the Engineer-in-Charge{Drg No.FD-278} |
| 54 | Removing the unserviceable/damaged top of Table dressing Gents and providing new top with 18mm thick pre-laminated particle board exterior grade OST face with teak wood beading and fixing to the frame work including polishing all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-230} |
| 55 | Removing the unserviceable/damaged top of Peg table and providing new top with 18mm thick pre-laminated particle board exterior grade OST face with teak wood beading and fixing to the frame work including polishing all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-277 & FD-384} |
| 56 | Removing the unserviceable/damaged top of Table writing and providing new top with 18mm thick pre-laminated particle board exterior grade OST face with teak wood beading and fixing to the frame work including polishing all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-275 &FD-249} |
| 57 | Removing the unserviceable/damaged plywood back cover of mirror from Table dressing gents and providing new 6mm thick commercial ply wood ISI marked and fixing in possition all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-230} |
| 58 | Removing the unserviceable/damaged plywood back cover from table dressing ladies and providing new 6mm thick commercial plywood ISI marked and fixing in possition all as specified and as directed by the Engineer-in-Charge. {Drg No.FD-251 & FD-378} |
| 59 | Removing the unserviceable/damaged mirror of table dressing gents and providing new mirror 5mm thick and fixing in possition including polising all as specified and as directed by the Engineer-in-Charge{Drg No.FD-230} |
| 60 | Removing the unserviceable/damaged Mirror of table dressing ladies and providing new Mirror 5mm thick for table dressing ladies and fixing in possition including polshing all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-251 & FD-378} |
| 61 | Removing the unserviceable/ damaged ply wood from hat stand with mirror and providing new 4mm commercial ply wood ISI marked for back cover and fixing in position all as specified and as directed by the Engineer-in-Charge{Drg No.FD-233} |
| 62 | Repairing including removing of the unserviceable/ damaged Coat hooks and replacing the same with new Aluminnium anodised in position from each hat stand with mirror all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-233} |
| 63 | Removing the unserviceable/ damaged mirror from hat stand with mirror and supply and fix new mirror 5mm thick including polishing of hat stand with mirror all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-233} |
| 64 | Removing the unserviceable/damaged top of side board and supply new top made out of 19mm thick prelaminated particle board and fixing in position including covering with teak wood lipping/beeding all over all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241} |
| 65 | Removing the unserviceable/damaged single shutter of side board and supply new single shutter made out of 19mm thick prelaminated particle board and fixing in position covering the exposed faces with lipping all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241} |
| 66 | Removing the unserviceable/damaged back side cover of side board and supply new 6mm thick commercial plywood ISI marked and fixing in position all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241} |
| 67 | Removing the unserviceable/damaged drawers of side board and supply new drawers and fixing in position with lipping in open faces and fitted with D shaped SS handle/ ss knob for opening/closing all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241} |
| 68 | Removing the unserviceable/damaged Knob of side board and supply new Aluminium Knob 25mm dia and fixing in position all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241} |
| 69 | Removing the unserviceable/damaged legs of side board and supply new legs of side board made out of first class hard wood(teak wood) duly finished and polished and fixing in position all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241} |
| 70 | Removing the unserviceable/damaged bottom side long rails of side board and supply new bottom side long rails made out of first class hard wood(teak wood) duly finished and polished and fixing in position all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241} |
| 71 | Removing the unserviceable/damaged bottom side short rails of side board and supply new bottom side short rails made out of first class hard wood(teak wood) duly finished and polished and fixing in position all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241} |
| 72 | Removing the unserviceable/damaged middle shelf of side board and supply new middle shelf made out of particle board 19mm thick commercial with lipping on open faces and fixing in position all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241} |
| 73 | Removing the unserviceable/damaged plywood back cover of table bed side and providing new one with 6mm thick commercial plywood ISI marked and fixing in position all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-248} |
| 74 | Removing the unserviceable front top drawer of table writing and replacing it with new made out of 19mm thick prelaminated particle board exterior grade and covered with teak wood lipping/beeding in open faces and fixing in position fitted with new d shaped SS handle/SS knob all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-275} |
| 75 | Removing the unserviceable damaged shutter of table writing and replacing it with new shutter made out of 19mm thick prelaminated particle board including 75mm MS butt hinges (02 Nos) and fixing in position by covering with teak wood lipping/beeding in open faces and fitted with SS D shaped Handle/SS knob all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-275} |
| 76 | Removing of existing unserviceable ply wood Top of Bed and S&F 12mm thick plywood duly treated BWR grade (Commercial type) top to bed plywood top, fixed to existing wooden frame of bed plywood top with M S chromium plated screws counter sunked ply to giving a smooth finish, rubbed /polished, fixed as in repairs completed all as show on drawing specified and directed by Engineer-in-Charge make : Plywood Kitply, Anchor, Century, Sainik,green ply (as approved by GE/Engr-in-Charge) {Drg No FD-21/245/246} |
| 77 | M&L for Anti termite and anti-bug treatment shall be done before polishing the wooden items. M&L for scrapping, grinding will be caried out for renenwal of existing dust,dirt,faded polish etc.strictly as directed by the Engineer -in-charge.M&L for melamine polish,high gloss/mate /wallnut finish with spray machine applying shellac,wood filler,shelear etc after removing exisiting polish making surface smooth by sanding and grinding with standard work manship as directed by the Engr-in-charge for wooden articles including applying wax for deprressed surfaces as well as washing with caustic soda wherever required before polishing as specified and directed by the Engr-in-charge.Shade of polish should be directed by GE/Engr-in-charge for chair dining FD all patterns |
| 78 | All as per Item No.77 herein before but for Chair CB office/writing FD-280 |
| 79 | All as per Item No.77 herein before but for Desk with dias {Drg No.FD-147} |
| 80 | All as per Item No.77 herein before but for Display board various sizes(Large size) {Drg No.F-103/99/75/17/TP} |
| 81 | All as per Item No.77 herein before but for Form with back {Drg No.FD-78(M)} |
| 82 | All as per Item No.77 herein before but for Mirror with shelf {Drg No.FD-52(m)} |
| 83 | All as per Item No.77 herein before but for Stool dressing all sizes including MAP{Drg No.FD-252/374} |
| 84 | All as per Item No.77 herein before but for Sofa 4 Seater{Drg No.FD-258/373} |
| 85 | All as per Item No.77 herein before but for Sofa 2 Seater{Drg No.FD-258/373} |
| 86 | All as per Item No.77 herein before but for Sofa 5 Seater{Drg No.FD-373/281} |
| 87 | All as per Item No.77 herein before but for Sofa Single seater{Drg No.FD-373/281} |
| 88 | All as per Item No.77 herein before but for Table 2' x 2'{Drg No.FD-95} |
| 89 | All as per Item No.77 herein before but for Table 3'x2'(with/without drawer){Drg No.FD-284} |
| 90 | All as per Item No.77 herein before but for Table writing (FD-275/249) |
| 91 | All as per Item No.77 herein before but for Table cook house large FD-377 |
| 92 | All as per Item No.77 herein before but for Table dining 6 pers{Drg No.FD-273/FD/E6/MAP/} |
| 93 | All as per Item No.77 herein before but for Table dining 8 pers{Drg No.FD-239/273} |
| 94 | All as per Item No.77 herein before but for Table dining JCO's{Drg No.FD- FD/MAP/II/03} |
| 95 | All as per Item No.77 herein before but for Table dressing gents with mirror{Drg No.FD-230} |
| 96 | All as per Item No.77 herein before but for Table dressing ladies{Drg No.FD-378},FD/E6/MAP/II/ |
| 97 | All as per Item No.77 herein before but for Table bedside {Drg No.FD-28/248/276} |
| 98 | All as per Item No.77 herein before but for Side board various sizes |
| 99 | All as per Item No.77 herein before but for Bin soil linen all sizes FD-15,212,244 |
| 100 | All as per Item No.77 herein before but for Work bench all sizesDrg No FD-145/TP,various drgs} |
| 101 | All as per Item No.77 herein before but for Table dining 1200x900mm {Drg No.FD- 273} |
| 102 | All as per Item No.77 herein before but for Chair easy with detachable cushion {Drg No.FD-358} |
| 103 | All as per Item No.77 herein before but for Chair easy all patterns including FD-229 |
| 104 | All as per Item No.77 herein before but for Teapoy all patterns including (FD-278/232/278) |
| 105 | All as per Item No.77 herein before but for Table 3'x3'(FD-291/52) |
| 106 | All as per Item No.77 herein before but for Hat stand with mirror all sizes including FD 233,361FD-291/52) |
| 107 | All as per Item No.77 herein before but for Mirror with shelf and frame all sizes including FD /52) |
| 108 | All as per Item No.77 herein before but for Locker bedside wooden all types including FD-222/229/54(M)/DB-074 |
| 109 | All as per Item No.77 herein before but for Book Case{Drg No.FD-237} |
| 110 | Allas per Item No.77 herein before but for Peg Table {Drg No.FD-384} |
| 111 | All as per Item No.77 herein before but for Bed hard {Drg No. FD-246/FD21(M)} |
| 112 | All as per Item No.77 herein before but for Table Centre (FD-274) |
| 113 | All as per Item No.77 herein before but for Chair Dining MAP {Drg No.FD/E6/MAP/10} |
| 114 | All as per Item No.77 herein before but for Chair Dining OFFRS all patterns including {Drg No.FD/E6/MAP/II/04} |
| 115 | All as per Item No.77 herein before but for Table Dining MAP {Drg No.FD/E6/MAP/II/03} Please Enable Macros to View BoQ information |
| 116 | All as per Item No.77 herein before but for Table Dining MAP {Drg No.FD/E6/MAP/II/03} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender