Tender For Provn Of Guard Room At 71 Sub Area Pro Unit Under Ge (North) Udh Ur.
Tender Value
23.16 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
3 days left
EMD
46320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Guard Room At 71 Sub Area Pro Unit Under Ge (North) Udh Ur.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type soil inclding clearing away all grass, vegetation, saplings, shrubs, brushwood, roots and trees not exc 30cm girth and removing rubbish out side of the defence land, complete all as specified and directed. |
| 2 | Excavating over area not exc 1.5 mtr deep and getting out in any type of soil, complete all as specifeid and directed. |
| 3 | Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipes,laying of underground cables etc. and getting out in any type soil, complete all as specified and directed. |
| 4 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed. |
| 5 | Removing excavated surplus soil to a distance not exc 50 mtr and deposited where directed at a level not exceeding 1.50 mtr from the starting point, complete all as specified and directed. |
| 6 | Removing of demolition and excavated material to a distance exc 1.5 KM but not exc 5.0 KM form site and depositing where directed by Engineer-in-Charge. |
| 7 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete, complete all as specified and directed. |
| 8 | M&L for RCC M-25 (Design Mix) using 20mm graded crushed stone aggregates for foundation including rafts, footings, foundation beams, plinth beamsn bases for columns etc, basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 9 | M&L for RCC M-25 (Design Mix) using 20mm graded crushed stone aggregates for slab supported on wallls, beams etc, complete all as specified and directed. |
| 10 | M&L for RCC M-25 (Design Mix) using 20mm graded crushed stone aggregates for beams, cantilevers, bressummers, lintels over 1.5 mtr span, complete all as specified and directed. |
| 11 | M&L for RCC M-25 (Design Mix) using 20mm graded crushed stone aggregates for columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 12 | Use and waste of formwork to sides of coloums, beams, slab, landings and similar work not exc 200mm thick in rough finish surfaces of concrete, complete all as specified and directed. |
| 13 | M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 14 | All as per serial item No. 13.00 here-in-above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders. |
| 15 | M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, built in CM 1:6, complete all as specified and directed. |
| 16 | M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, built in CM 1:4, complete all as specified and directed. |
| 17 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floors or pavings or sub base etc, complete all as specified and directed. |
| 18 | M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan, any radius in half bricks thick wall, built in cement mortar 1:4, complete all as specified and directed. |
| 19 | M&L for 15mm thick rendering in cement mortar 1:4 with brick or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 20 | M&L for 10mm thick rendering in cement mortar 1:6 with brick or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 21 | M&L for 5mm thick cement plaster in cement mortar 1:3 as on ceiling, finishing the surface even and smooth without using extra cement, complete all as specified and directed. |
| 22 | M&L for preparation of surfaces and applying three coats of white wash on newly plastered surface of ceiling, complete all as specified and directed. |
| 23 | M&L for preparing of new plastered surfaces of walls and applying two coats of cement base paint over one coat of alkali resistance primer including 1 to 1.2mm thick exterior wall care putty (to be applied in two coats), complete all as specified and directed.Note :- Putty surface shall be rubbed with emery paper to form even and smooth surface. |
| 24 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distember over one coat of primer, complete all as specified and directed. |
| 25 | Supply only integral water proofing compound, complete all as specified. |
| 26 | M&L for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, finished even and smooth without using extra cement including making joints 10mm wide and 30mm deep at spacing not more than 2.5 mtr and at corners at mandatory and filled with sealing compound Grade A, complete all as specified and directed. |
| 27 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in sub base floor, finished rough to receive topping layer, complete all as specified and directed. |
| 28 | M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.06 Sqm but not exc 0.11 Sqm (Min size 300mm x 300mm) as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 29 | M&L for 18-20mm thick machine cut kota stone slab flooring as in floors, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid/ fixed over and including 20mm thick screed bed in CM 1:3, complete all as specified and directed. |
| 30 | M&L for glazed ceramic coloured tiles as on vertical surfaces of wall, size of each tile 450mm x 350mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in CM 1:4, complete all as specified and directed. |
| 31 | S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6, complete all as specified and directed. |
| 32 | S&F factory made, 2nd class hard wood rail and style 35mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 33 | S&F 30mm thick factory made, 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats at site, complete all as specified and directed. |
| 34 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 35 | S&F 4.0mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, fixed to steel, metal frames, complete all as specified and directed. |
| 36 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with uitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and as directed. |
| 37 | S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing and as directed. |
| 38 | S&F 150mm extruded aluminium alloy handles, fabricated type, anodised and fixed with brass screws, complete all as specified and directed. |
| 39 | S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed with brass screws, complete all as specified and directed. |
| 40 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed with brass screws, complete all as specified and directed. |
| 41 | S&F 200mm long aluminium anodised barrel tower bolt of extruded section and fixed with brass screws, complete all as specified and directed. |
| 42 | M&L for 3 layer rotational moulded polyethylene water storage tanks any colour 1000 ltr Capacity (Cylindrical vertical with closed top), hoisted and fixed in position including tank nipple inlet and outlet and conneting pipes all as specified in SSR Part-I complete all as specified and directed. |
| 43 | S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed to 20mm bore iron pipe and fixed in position, complete all as specified and directed. |
| 44 | S&F 20mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 45 | S&F 15mm dia bib tap, long body, chroimum plated (ISI Marked with valid CML No) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including elbow/ socket etc. as required at site, complete all as specified and directed. |
| 46 | M&L for 15mm bore steel water tubing, medium grade, galvanised iron with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 47 | M&L for 20mm bore steel water tubing, medium grade, galvanised iron with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 48 | M&L for 25mm bore steel water tubing, medium grade, galvanised iron with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 49 | S&F PVC connection pipe of 15mm dia with PTMT nuts of length 450/600mm, complete all as specified and directed. |
| 50 | S&F brass chromium plated shower rose of 125mm size with arm and with or without swivel joints, fixed steel pipe or union, complete all as specified and directed. |
| 51 | S&F concealed type stop/ angle valve, brass chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions including fittings as required at site, complete all as specified and directed. |
| 52 | S&F PVC low level flushing cistern of 10 ltrs capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc, complete all as specified and directed. |
| 53 | S&F vitreous china wash down water closet pan `P` (Orissa pattern) white including fixing bolts including connection to drain pipe (or out going pipe) and to flushing pipe, anti syphonage pipe etc, complete all as specified and directed. |
| 54 | S&F vitreous china urinal, pedestal type, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed. |
| 55 | S&F urinal spreader of chromium plated for fixing with 15mm bore pipe (minimum weight 60 gms), complete all as specified and directed. |
| 56 | S&F pillar tap, fancy type, brass chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore pipe connection and fixed, complete all as specified and directed. |
| 57 | S&F vitreous china counter top wash basin of size 600mm x 450mm over 18mm thick pre-polished granite slab including supply of granite, cutting, edge moulding, polishing, cut-outs, fixing wash basin, sealing joints, making necessary cut-out for basin and holes for waste, fixing basin in position with approved adhesive, sealing joints with white cement/ silicone sealant, complete all as specified and directed, |
| 58 | S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 59 | S&F PVC (SWR) bends of 75mm bore, any radius with oval & acces door, complete all as specified and directed. |
| 60 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, fixed to 75mm bore pipe, complete all as specified and directed. |
| 61 | S&F PVC (SWR) junction single, Single T, equal or unequal, fixed to 75mm bore pipe, complete all as specified and directed. |
| 62 | S&F 110mm bore PVC (SWR) pipes, double socketed in any length with rubber ring joints, fixed to walls with MS clamps of suitable size, complete all as specified and directed. |
| 63 | S&F 600mm x 450mm size bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 64 | S&F in replacement of 20mm dia brass chromium plated tubular towel rails, 'D' type 60cm long between flanges, complete all as specified and directed. |
| 65 | M&L for mild steel work such as grills, gratings etc. with ends of bars, shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tank and similar work, conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 66 | M&L for preparation of new or previously untreated steel and iron surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over preprimed surfaces, complete all as specified and directed. |
| 67 | S&F factory made mild steel ventilator / windows, box type with upper top hung shutters and bottom fixed type shutters including pintol hinges, steel peg stay and one shop coat of red oxide primer, complete all specified and directed.Notes :- (i) The window shall be fabricated as per Drg No. CEUZ/TD/1302/2009 Sheet 1/3 to 3/3.(ii) MS fillets, glazing, wire gauge shall be measured and paid separately. |
| 68 | S&F 4mm thick figured glass, pin head type and glazing with oil putty or wooden beads in square not exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 69 | M&L for applying first coat fiber reinforced elastomeric liquid water proofing membrane (Make - Asian Paints) formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110 having minimum elongation of 350%, tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50mm and allow it to dry and apply second of undiluted coat @ 0.45/tr/sqm and apply third and final coat undiluted @0.451 ltr/sqm and including 10mm thick rendering in CM 1:3 and finishing the surface even and smooth before application of priming coat, complete all as specified and as directed by Engineer-in-Charge. |
| 70 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, park, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 71 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in copings, kneelers, apex stones, pier caps, bed plates, bonders (for stone walling), corbels, brackets etc. (of any section indicated) with plain fair faces including chamfers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to match, complete all as specified and directed. |
| 72 | Construction of soakage well, excavation in any type of soil, foundation in PCC 1:3:6 type C-1, wells of honey combed and solid in M-25 Grade cement concrete including intercepting chamber, screen chamber, brick work in CM 1:4, RCC cover slab in M-25 Grade cement concrete, RR masonry, filling with brick bats complete of size 1.2 Mtr dia X 3.0 Mtr deep, complete all per drawing No. CE/TD-1202/2003 dated 09 Oct 2003 Sheet 1/2 & 2/2 and as specified and directed by Engineer-in-Charge. |
| 73 | Construction of septic tank, excavation in any type of soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC slab covers including RCC precast manhole cover having 6mm thick plate embedded all and sludge chambers etc, complete for 10 Users, reinforced cover with angle iron frame, vent shaft around/fibre, complete all per drawing No. CE/TD-1202/2003 dated 09 Oct 2003 Sheet 1/2 & 2/2 and as specified and directed by Engineer-in-Charge. |
| 74 | M&L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipes of 150mm bore including packing under and hauching against the sides of pipes after they are laid and tested, complete all as specified and directed. |
| 75 | M&L for 150mm bore reinforced cement concrete pipes, class NP2, laid in trenches and jointed complete with collars, complete all as specified and directed. |
| 76 | Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in landing, cover slabs (for manholes etc.), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in cement mortar 1:4 with joints to match, complete all as specified and directed. |
| 77 | M&L for cutting into existing manholes for connecting new drains of 150mm bore, making good to pipe and rendering, cutting out existing benching and forming branch channel in cement concrete 1:2:4 type B-1, smooth finished and reforming benching as required, complete all as specified and directed. |
| 78 | M&L for 40mm bore steel water tubing, medium grade, galvanised iron with all fitting, laid in trenches, complete all as specified and directed. |
| 79 | M&L for 25mm bore steel water tubing, medium grade, galvanised iron with all fitting, laid in trenches, complete all as specified and directed. |
| 80 | S&F 25mm dia stop valve, screwed, complete all as specified and directed. |
| 81 | M&L for cutting the existing MS/ DI/ CI/ GI branch pipe line of any size carefully by means of gas cutter, removing the rusted MS pipe lines, making provision for joining new MS/ CI/ DI/ GI pipes of same size by welding MS flanges of suitable size and making leake proof joint including all jointing materials like bolts, nuts and gaskets as required at site, complete all as specified and as directed by the Engineer-in-Charge.Note :- GI pipes will be measured and paid under relevant items of this BOQ. |
| 82 | M&L for point wiring using approved colour coding as per IS code (Red, Black and Green for single phase circuit) with multi-stranded copper condutor 1.5 Sqmm nominal cross section area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, in and including medium grade PVC concealed conduit ISI marked of dia not less than 25mm and conduilt accessories, concealed in wall/ roof/ floor etc. with terminated to new pressed flush metal box and readily available cover with outer plates and inner plates etc, suitable for mounting modular type switches, sockets, fan regulators etc. and PVC insulated multi-stranded copper condutor 1.5 Sqmm nominal cross section area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly, complete all as specified and directed with the followings :-One light point, controlled by one SP switch. |
| 83 | All as per serial item No. 82.00 here-in-above but one fan point, controlled by one SP switch. |
| 84 | All as per serial item No. 82.00 here-in-above but one exhaust fan point, controlled by one SP switch. |
| 85 | All as per serial item No. 82.00 here-in-above but one 5 Amps socket on independent board, controlled by one SP switch. |
| 86 | All as per serial item No. 82.00 here-in-above but one 5 Amps socket on same board, controlled by one SP switch. |
| 87 | M&L for point wiring with two runs of FRLS PVC insulated unsheathed 1100 Volts grade cable multi-stranded copper conductor of size 2.5 Sqmm, drawn through in and including PVC conduit size of not less than 25mm dia, concecled in wall/ roof/ floor surface including sutiable size new annealed sunken boxes, modular frame and cover plate for fixing of modular switch, socket and regulator along with earth wire of PVC insulated unseathed 1100 Volts grade cable multi-stranded copper conductor of size 2.5 Sqmm and for modular socket outlet, 2-in-1, 6/16 Amps on an indeendent board including making good disturbed surfaces, complete all as specified and directed. |
| 88 | S&F modular switch, one module, 5/6 Amp, one way, 230 Volts AC, complete all as specified and directed. |
| 89 | S&F modular socket 6 Amps, 5 pin, flush type, 240 volts with polycarbonate body, complete all as specified and directed. |
| 90 | S&F modular socket outlet, 5 pin, 6 Amps and 15 Amps, multipurpose 2 in 1, flush type, 230 volts with polycarbonate body, complete all as specified and directed. |
| 91 | S&F modular switch single pole, one way, 16 Amps 230/240 Volts with polycarbonate body, complete all as specified and directed. |
| 92 | S&F ceiling rose, 3 phase, PVC / polycarbonate, surface type, 65mm x 50mm, insulated body, three terminal, complete all as specified and directed. |
| 93 | S&F LED light fitting of 20 Watt high quality material and design. Extruded aluminium housing enhances safety with high quality PC diffusers, reliable and robust housing structure, maximize the endurance over the life time slim integrated design, easy to install. Efficacy : 110 lm/W and also available in warm white and natural white complete making all connection using 1.5 Sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceiling, complete all as specified and directed. |
| 94 | S&F LED light fitting of 10 Watt Trimline Neu is a robust and high performance batten. This LED luminaire comprises of extruded channel in thermally conductive material. High translucent serrated milky white diffuseris used to get glare free and smooth light distribution. Efficacy : 120 lm/W. Also available in warm white and natural white complete making all connection with using 1.5 Sqmm copper conductor multistranded PVC insulated 2 Core flexible cable from ceiling rose to fitting, complete all as specified and directed. |
| 95 | S&F MCB metalic distributition board 12 Way, double door, 230 Volts, concealed flush to wall for mounting MCBs factory made, conforming to IS:13032, fabricated out of CRCA sheet fitted with DIN channel, neutral link and approriate rated bus bar. The DBs shall be semi glossy finished with epoxy polyster based powder paint sprayed and backed at high temperature, between powder paint process to ensure smooth finish and protection against corrsion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs and shall also be provided with lable marking indicating. The incoming and outgoing circuits on all ways as specified and the DBs shall be of IP-43 protection, complete all as specified and directed. |
| 96 | S&F 35 Watt LED security light fitting with best in class, design & robust heat sink along with class leading IP, IK & surge protections for long lasting performance and with GI pipe medium grade of 0.60 mtr long and 25mm dia (as per manufacturer's standard) and in 45 degree bend, shape and necessary clamping devices as required at site, complete all as specified and directed. |
| 97 | Supply, laying and testing or passing through existing/ new duct/ pipe, 1100 Volts grade heavy duty XLPE cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armored with galvanized steel wire or tape and overall PVC sheathed, size 16 Sqmm 2 Core nominal cross section, complete all as specified and directed. |
| 98 | S&F MCB single pole and neutral, 240 Volts, 32 Amps, breaking capacity 10 KA, ‘B’ Series, complete all as specified and directed. |
| 99 | S&F MCB single pole, 240 Volts, 6 to 32 Amps, 50 HZ, 10 KA, ‘B’ series, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 100 | S&F MCB single pole, 240 Volts, 6 to 32 Amps, 50 HZ, 10 KA, ‘B’ series, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender