Tender For Special Repair To Water Supply Line At Pratap Nagar At installation Shivaji Lonavla (8506/E8)
Tender Value
43.59 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
12 days left
EMD
87200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Water Supply Line At Pratap Nagar At installation Shivaji Lonavla (8506/E8)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Oct-2026 | Amendment to BOQ | BOQ | 09-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in hard dense soil all as specified and directed |
| 2 | Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed |
| 3 | Removing excavated soil to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified and directed. |
| 4 | Taking up old Cast iron water main of size any dia including all fittings for spigot and socket ends and lead joints including burning out lead joint and recovering lead complete all as specified as directed. Note :- (i) Excavation earthwork shall be measured and paid seperately |
| 5 | S&F Ductile Iorn pressure Pipes with Spigot and Socket ends centrifugally cast, Class K-9 confirming to IS :8329/2000 laid in trenches including reducing the length of required size complete all as specified as directed for DI pipe of size 80 mm:- Note :- (i) Excavation earthwork shall be measured and paid seperately. (ii) DI fitting will be measured and paid seperately. |
| 6 | All as per item no.5 but of size 100 mm |
| 7 | All as per item no.5 but of size 150 mm |
| 8 | All as per item no.5 but of size 200 mm |
| 9 | Supply and laid spigot and socketed CI /DI fittings. Such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc of size upto 150mm dia. |
| 10 | Taking down unserviceable GI pipe line of following size from the trenches by removing of nut and bolts of following size 20 mm dia |
| 11 | All as per item no.10 but of size 25 mm |
| 12 | All as per item no.10 but of size 40 mm |
| 13 | All as per item no.10 but of size 50 mm |
| 14 | S & F GI tubing medium grade with all new connections and fittings such as tees, bends, elbows, short pieces, connector back nuts, diminishing pieces, caps, plugs unions etc Laid in trenches for size of 40 mm dia pipes complete all as specified and as directed |
| 15 | All as per item no.14 but of size 50 mm |
| 16 | S & F GI tubing medium grade with all new connections and fittings such as tees, bends, elbows, short pieces, connector back nuts, diminishing pieces, caps, plugs unions etc fixed complete to walls and ceiling or laid in floors for for size of 20 mm dia pipes complete all as specified and as directed :- |
| 17 | All as per item no.16 but of size 25 mm |
| 18 | All as per item no.16 but of size 40 mm |
| 19 | Supply and fix in replacement Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete of size 20 mm dia |
| 20 | All as per item no.19 but of size 25 mm |
| 21 | All as per item no.19 but of size 40 mm |
| 22 | All as per item no.19 but of size 50 mm |
| 23 | Supply & fix mechanical joint/Coller ISI marked for spigot end pipe of size 150 mm |
| 24 | All as per item no.23 but of size 100 mm |
| 25 | Dismantling/taking out unserviceable sluice valve of size 80mm to 300mm bore dia by opening/cutting rusted nuts, bolts etc all as specified and directed. |
| 26 | Supply and fix of CI Rising Spindle sluice valve Make-Kriloskar valve both ends flanged and drilled. Hand wheel made out of grey CI, complete valve confirming to IS 14846 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.6 ISI marked complete all as specified and directed of size 80 mm :- |
| 27 | All as per item no.26 but of size 100 mm |
| 28 | All as per item no.26 but of size 150 mm |
| 29 | All as per item no.26 but of size 200 mm |
| 30 | M & L for brick masonary valve pit chambers with and including one brick thick masonary built in cement mortar (1:4)) PCC in foundation 1:4:8 type D2 (using 40 mm graded stone aggregate, rendering 10 mm thick in cm 1:6 internally 10 mm thick rendering in cement mortar (1:4) finished even and fair externally, PCC 1:2:4, type B1 (Using 20 mm graded stoneaggregate) for coping 10 cm thick, 3 mm thick MS plate cover with locking arrangements with angle iron frame of size 50x50x5mm including painting to MS work with two coats of synthetic enamel black paint over one coat of red oxide primer including necessary excavation and earth in any type of soil/strata complete for following size :-Internal dimension 1050x1050x1050mm. |
| 31 | All as per item no.30 but of size 900x900x900 |
| 32 | All as per item no.30 but of size 600x600x600 |
| 33 | Cutting of road /hard standing for laying /dismentling of pipe line and making good surfaces matching with the existing surface after laying of pipe line.up to 30 cm |
| 34 | M& L for Demolition of Cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) with dimensions. |
| 35 | M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rolled/rammed to a rue surface |
| 36 | M & L for Cement concrete type D- 2, 1:4:8 (40mm graded aggregate),75 mm thck |
| 37 | M & L for Sand filling under floors or in foundations including watering and consolidation |
| 38 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment |
| 39 | M & L for Filleting in any position and to any shape in cement lime mortar 1:1:4 including all mitres, stops, etc |
| 40 | S&F Joist, channel, angle,or tee sections, fixed independently, without connecting plates, etc. cut to ordinary lengths i.e.within 20mm of the length indicated (Fe-410-W(Gde-E-250) quality-A. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 12 daysNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender