Tender For special Repair To E/M Installation (Blog No P-7, P-8 &P-38) B/R Installation (Bldg No P-24, T-25) At Timarpur And Covered Hard Standing For 60 Bicycles And 20 Scooter At Cannon Ridge Military Station, Shakurbasti And 04 X 2 Ton All Weather
Tender Value
45.61 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
19 days left
EMD
91300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To E/M Installation (Blog No P-7, P-8 &P-38) B/R Installation (Bldg No P-24, T-25) At Timarpur And Covered Hard Standing For 60 Bicycles And 20 Scooter At Cannon Ridge Military Station, Shakurbasti And 04 X 2 Ton All Weather Tower Ac For Comn Complex At Entity ‘B Weu Hirankudna Under Ge (North) Delhi Cantt -10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and all as directed. |
| 2 | Taking down chowkhats or frames with shutters exc 1.5 sqm but n.exc 4.00 Sqm each(without taking off shutters from the frame) and all as directed. |
| 3 | Taking down Rolling shutters exc 4.00Sqm eachincluding necessary cutting complete all as directed. |
| 4 | S&F for Steel rolling shutters, with out ball bearing, as specified including top cover, an- choring rod, hasp and staple and one shop coat of primer; erected in position as indi-cated, complete: push pull but gear operated type with bevel gear box and crank handle including ball bearings, frame track, Complete all as specified and directed. |
| 5 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; side hung or barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 |
| 6 | Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. |
| 7 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) or openable type/casement windows upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. rathe shall be included for Glass and wiremesh. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 8 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified. |
| 9 | S&F 100 mm size stainless steel butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed |
| 10 | S&F Stainless steel barrel tower bolt 150mm long extruded section all as specified. |
| 11 | S&F 150mm size stainless steel handles fabricated type anodised complete all as specified. |
| 12 | S&F 300mm long Stainless steel sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete. |
| 13 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition including neccassary scaffolding arrangement complete all as specified and directed.Note : Note : Work shall execute upto 15mtr height |
| 14 | M&L for RCC 1:2:4 type B-1 (using 20.mm graded stone aggregate) as in Chajjas, slab and the like complete all as specified and directed. Note : Work shall execute upto 15mtr height |
| 15 | Use & Waste of formwork to Chajjas, soffits of slab ,chullah hoods, troughs and similar items including edges rough finished surfaces complete all as specified and directed.Note : Work shall execute upto 15mtr height |
| 16 | S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 17 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete.all as specified and directed. |
| 18 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete.all as specified and directed. |
| 19 | M&L for Glazed and skeleton shutters WPC (Wood Polymer Composite) 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 20 | S&F 300mm long stainless steel sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section and fixed complete. |
| 21 | Dismantling of floor tiles, mozzac floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete all as specified and directed. |
| 22 | M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf, Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) including rounding the exposed surfaces of granite complete all as specified. |
| 23 | M&L glazed ceramic coloured tiles of size 600x300x7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick backing coat in CM (1:3) complete all as specified and directed. |
| 24 | M&L non skid ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed. |
| 25 | M&L Vetrfied Ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed. |
| 26 | Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site all as specified and directed. |
| 27 | M&L for 40 mm thick Cement concrete 1:2:4 type B-1 as in floor including surfaces to be finished even and rough with using extra cement complete all as specified and directed |
| 28 | M&L for 75 mm thick PCC (1:3:6) Type C-2 (20 mm graded aggregate) as in plinth protection incl finishing the concrete surface even and smooth w/o using extra cement complete all as specified.(Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.) |
| 29 | Taking down cement plaster on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by the Engr-in-Charge. |
| 30 | Material and labour for 5 mm thick plastering in CM Cement 1: Sand 3 and mixing with Nano wall filler 1% of the 50Kg of Cement on concrete surfaces as in sides of column, lintel, beam, chajja, Ceiling facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and as directed Note :- Nano wall filler shall be measured and paid separately. |
| 31 | Material and labour for 15mm thick plaster in cement mortar with cement 1: sand 4 in two layers and mixing with Nano wall filler 1% of the 50Kg of Cement i.e as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified. Note :- 1. The work shall be executed up to G+5th floor Height.2. Nano wall filler shall be measured and paid separately. |
| 32 | Material and labour for rendering 10mm thick in cement mortar : cement 1: sand 6 and mixing with Nano wall filler on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified.Note :- 1. The work shall be executed up to G+5th floor Height.2. Nano wall filler shall be measured and paid separately. |
| 33 | Supply only Nanotechnology based Elastomeric Hydrophobic Powder/admixture (EHP) powder for cement plaster and concrete. |
| 34 | Complete removal of existing treatment & levelling of wall/ceiling surface using MECHANICAL / ELECTRICAL OPERATED SANDING / SCRAPING MACHINE WITH INBUILT VACCUM SUCTION system to suck the existing treatment as retrieved by scrapping/sanding etc for obtaining smooth paintable surface complete all as specified and directed by Engr-in-Charge. |
| 35 | Material and labour for preparation of old/new plastered surfaces and applying Nanotechnology based Nano Putty is white cement based product with dispersible polymer and functional additives for application on interior rough plasters to give a smooth surface and will form base for paint finish for interiors of the building, applied in 02 coats of total thickness 1.5mm @ 1.2 kgs/sqm complete all as specified. |
| 36 | Material and Labour for 02 coats of Nanotechnology based Acrylic Regular Distemper, water based gives walls a smooth and matt finish and applied on prepared surface of wall & ceiling over a coat of approved nano primer @ 6.50 sqm/ltr using AUTO-ROLLER and AIR-LESS PAINT SPRAYER complete all as specified and dircted by Engr-in-Charge. |
| 37 | Providing and applying Nano Water Base Elastomeric Finish two coats over and above one coat of Nano Water Base Elastomeric Primer not containing toxic materials like Pb, Cr, Zn, biocides/organocides; having defect-free nano-particles with inhibiting characteristics having bacteria killing rate above 40% and high anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 750 , with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 40 micron DFT of top coat, including scaffolding, surface preparation, cleaning etc.complete as per specification on New and Old cleaning Surfaces as directed by the Engineer In-charge. |
| 38 | Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed. |
| 39 | M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:6 complete all as specified and directed. |
| 40 | Taking up or down steel tubing and connections including clening for refixing or removal to store of 15mm bore complete all as specified and directed. Please Enable Macros to View BoQ information |
| 41 | Taking up or down steel tubing and connections including clening for refixing or removal to store of 15mm bore complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender