Tender For Special Repair To Bldg No P-195 Of 12 (I) R&O Flt, Provn Of Support Hand Railing For Various Wards And Depts Of 165 Mh, Provn Of Toilet/Bathroom At Training Area Of 3 Cesr In ‘Q Zone And Provn Of Toilet/Bathroom At Spear Play School At Rms
Tender Value
42 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
12 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wokha → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-195 Of 12 (I) R&O Flt, Provn Of Support Hand Railing For Various Wards And Depts Of 165 Mh, Provn Of Toilet/Bathroom At Training Area Of 3 Cesr In ‘Q Zone And Provn Of Toilet/Bathroom At Spear Play School At Rms
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 2 | Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 3 | Taking down door shutter exceeding 1 sqmtr but not exceeding 2 sqmtr each and removing to store complete all as specified and as directed. |
| 4 | M&L for light/coloured shade vitrified ceramic tiles (8-9mm) thick of size exc 0.36sqm but n.exc 0.42 Sqm each in floors, laid over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles including cement mortar bedding of any description and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 5 | M&L for light/coloured shade vitrified ceramic tiles (8-9mm) thick of size exc 0.18sqm but n.exc 0.36 Sqm each in floors, laid over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles including cement mortar bedding of any description and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 6 | M&L for light/coloured shade vitrified ceramic tiles (8-9mm) thick of size exc 0.18sqm but n.exc 0.36 Sqm each on vertical surfaces such as skirting, dado,risers to steps, over and including 10 mm thick backing coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles including cement mortar bedding of any description and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.as directed. |
| 7 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm each, in floors, laid over and including 15mm thick screed bed for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed. |
| 8 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm each, in floors, laid over and including 15mm thick screed bed for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. |
| 9 | M&L for Glazed ceramic coloured tiles in vertical surface including high lighter/strips of tile size 450X 350X 7 mm,/350 x 250 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over and including backing coat of 10 mm thick in CM (1:4) including dismantling of old tiles including cement mortar bedding of any description and removing rubbish off the premises complete all as specified and as directed. |
| 10 | M&L for Glazed ceramic coloured tiles in vertical surface including high lighter/strips of tile size 450X 350X 7 mm,/350 x 250 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over and including backing coat of 10 mm thick in CM (1:4) complete all as specified and as directed. |
| 11 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors, laid over and including 15mm thick screed bed for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. |
| 12 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 13 | M&L for Rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work/concrete work and finished even and smooth without using extra cement complete all as specified and as directed. |
| 14 | Supply only water proofing compound complete all as specified and as directed. |
| 15 | M&L for rendering 15 mm thick in cement mortar (1:4) on brick work/concrete surfaces finished even and fair with and including WPC @ 2% by weight of cement content and without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separately. |
| 16 | M&L for rendering 5 mm thick in cement mortar (1:3) on ceiling surface and finished even and fair complete all as specified and as directed. |
| 17 | M&L for preparation of new plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint over and including a coat of primer complete all as specified and as directed. |
| 18 | M&L for applying 1.5mm thick Birla white putty/JK white wall care putty on walls complete all as specified and as directed. |
| 19 | M&L for preparation of old plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint over and including a coat of primer complete all as specified and as directed. |
| 20 | M&L for preparation of new plastered surfaces of wall applying two coats of oil bound distemper white or tinted on walls over and including a coat of alkali resistant primer over and including 1.5mm thick wall care putty(in two layers) of approved shade complete all as specified and as directed. |
| 21 | M&L for complete removal of existing treatment and applying two coats of oil bound distemper white or tinted on walls over and including a coat of alkali resistant primer over and including 1.5mm thick wall care putty(in two layers) of approved shade complete all as specified and as directed. |
| 22 | M&L for complete removal of existing treatment on ceiling surfaces and applying two coats of oil bound distemper white or tinted over and including a coat of alkali resistant primer over and including 1.5mm thick wall care putty(in two layers) of approved shade complete all as specified and as directed. |
| 23 | M&L for preparation of new plastered surface of ceilings and applying two coats of oil bound distemper white or tinted over a coat of alkali resistant primer over and including1.5 mm thick cement based wall care putty(in two layers) over ceiling complete all as specified and as directed. |
| 24 | Demolition of cement concrete in unreinforced of any description and in any position not otherwise specifically provided, complete all as specified and as directed. |
| 25 | M&L for 75 mm thick PCC (1:3:6) type C2 , using 40 mm graded stone agg in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and as directed |
| 26 | S&F in repairs 1000 ltr capacity rotational moulded polythylene water storage tanks double layer (cylindrical, vertical with closed top ),including provision of 20 and 25 mm dia spouts for inlet and outlet and connection including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20 mm - 210 gms) complete all as specified and as directed. |
| 27 | S&F 1000 ltr capacity rotational moulded polythylene water storage tanks double layer (cylindrical, vertical with closed top ),including provision of 20 and 25 mm dia spouts for inlet and outlet and connection including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20 mm - 210 gms) complete all as specified and as directed. |
| 28 | S&F 500 ltr capacity rotational moulded polythylene water storage tanks double layer (cylindrical, vertical with closed top ),including provision of 20 and 25 mm dia spouts for inlet and outlet and connection including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20 mm - 210 gms) complete all as specified and as directed. |
| 29 | M&L for roof treatment (for staircase/tank portion/slab of bldgs) including taking down old existing treatment from its position including the following:-(i) Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.(ii) Brushing neat cement slurry with 3 kg of cement per square metre (iii) 25 mm thick cement concrete (1:2:4) type B-1 (using 12.5 mm graded stone aggregate) as in slope correction layer over RCC slab finished without using extra cement as in top of roof.(iv) Screed bed or bedding layer 15mm thick layer of cement mortar (1:4) using WPC @ 3% by weight of cement content and surfaces finished even and smooth without using extra cement(v) Applying evenly a tack coat of industrial bitumen 85/25 @1.2 kg per sqm including cleaning surfaces.(vi) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric laid on primed surface by forced application complete all as specified(vii) one coat of aluminium primer (reflux) @ 0.10 kg /sqm applied on treated bituminous membrane |
| 30 | M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and as directed. |
| 31 | S&F Pressed steel frames of size 125 X 60mm (Thickness of MS Sheet 1.25mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,with and including filling hollow of frame with PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) complete all as specified and as directed. |
| 32 | M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of redoxide primer on new surfaces in any tint complete all as specified and as directed. |
| 33 | M&L for 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 34 | M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of pink wood primer on new surfaces complete all as specified and as directed. |
| 35 | S&F factory made 35mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-Charge. |
| 36 | S&F stainless steel wire cloth 0.36 nominal dia of wire and average width apperture 1.40 mm and fixed with stainless steel wire staples or wooden beads supplied with shutter complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 37 | S&F stainless steel wire cloth 0.36 nominal dia of wire and average width apperture 1.40 mm and fixed with stainless steel wire staples or wooden beads supplied with shutter complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender