Tender For Maintatance To The Community Hall With New Toilet,New Waiting Shed Near Phn. Primary School At Kamatchipuram In Kamatchipuram Panchayat
Tender Value
16000
Estimated cost
Bid Submission
10 Nov 2026
22 days left
EMD
16000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Theni → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintatance To The Community Hall With New Toilet,New Waiting Shed Near Phn. Primary School At Kamatchipuram In Kamatchipuram Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the old damaced flooring concrete |
| 2 | Removing with old damaged pressed tiles with weathering coarse as per std.specification |
| 3 | Earthwork excavation for foundation in all clauses of soils hard red earth,shale murrams, gravel stoney earth and earth muds with 50% fair sized boulders and hard gravelly soils as per SS20B.etc,complete. |
| 4 | Cement concrete 1:4:8 mix using 40mm ISS HBG metal for foundation including watering whenever necessary and laid in layers not more than 15cm thick compacting etc., complete complying with std. Specifications and as directed. Rate for 10 cum. |
| 5 | Brick work in c.m 1:5 mix using country bricks ground moulded of size 23x11x7 cu.cm including cost & conveyance of all materials to site and all labour charges etc., complete. |
| 6 | Plastering with cement mortar 1:5 mix to 12mm thick including curing, cost and conveyance of all materials & all labour charges etc., complete. |
| 7 | wall putty painting in including curing etc complete complying with standard specification and as directed |
| 8 | Finishing the floor with Ceramic tiles Laid in cm;1;3 mixincluding cost & conveyance of all materials to site and all labour charges etc., complete. |
| 9 | Dadooing the sides of wall using glazed tiles in cm;1;3 mixincluding cost & conveyance of all materials to site and all labour charges etc., complete. |
| 10 | weathering coarse using brocken brick jelly concrete with lime mortor with all cost and conveyance |
| 11 | Finishing the Top of roof with Pressed tiles of size;23cmx23cmx0.60cm in c.m;1;3 mix,and pointing with same mix including cost & conveyance of all materials to site and all labour charges etc., complete. using 20% new |
| 12 | using 80% old |
| 13 | Supplying and fixing in position Indian Water closet ( Oriya type ) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\" P \\" or \\" S \\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one lime, Two sand and five brick jelly ) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes ( including the cost of 110mm dia PVC pipes for a lenth of 600mm ) by dismandling brick masontry wall to the original condition with leakages etc., complete complying with std specification . |
| 14 | Painting in two coats over inner wall surface with approved quality of Oil bound distember with colour over one coat of pirming coat including cost and conveyance of all materials to site etc |
| 15 | Painting in two coats over outer wall surface with approved quality of Plastic emulsion paint with colour over one coat of priming coat including cost of materials and labour charges etc. |
| 16 | Painting in two coats over old steel door with approved quality of enamel paint paint with colour over one coat of priming coat including cost of materials and labour charges etc. |
| 17 | Providing and fixing of Aluminium Composite Panel (ACP)4 sided having 50 x 25 x 1.50mm frame work vertical andhorizontals out of specially designed extruded sectionswithstand wind pressure of 180 Kg/sq.m and fabricatedfixed at all level elevation and heights. The extrudedsection cutting and fixing required space extrudedsection shall be of 6063 and alloy of BSH 9 confirming ( SOR-PWD /2025-26) |
| 18 | for roof shed supply and fixing of M.S. Angle section including nessecery cutting , welding holes drilling, and fixing with rafts, post etc. complete |
| 19 | Roofing with colour coated GI sheets with all necessary fittings including cost , conveyance and fixing in position |
| 20 | provision for new toilet Earthwork excavation and depositing on bank with initial leads of 10m and lifts of 2m In hard stiff clay, stiff black cotton soil, hard red earth, shale murrams, gravel stoney earth and earth muds with 50% fair sized boulders and hard gravelly soils as per SS 20 B |
| 21 | Cement concrete 1:4:8 mix using 40mm ISS HBG metal for foundation including watering whenever necessary and laid in layers not more than 15cm thick compacting etc., complete complying with std. Specifications and as directed. Rate for 10 cum. |
| 22 | Refilling with excavated earth in layers of mot more than 15cm thick including watering ramming and consolidation etc., complete as per standard specification. |
| 23 | Brick work in c.m 1:5 mix using country bricks ground moulded of size 23x11x7 cu.cm including cost & conveyance of all materials to site and all labour charges etc., complete. |
| 24 | Supplying and erecting shuttering including necessary support for plance surface in Foundation Basement and Roof sllabs struting upto 3.29 M height for plane surfaces for floors for RCC column footings columns plinth beam and connecterd with foundations grade beams, raft slabs stair case steps, bed blocks, critical pier, etc beams roof slabs, using mild steelsheets of size 90 x 60 cm and 10 gouge stiffened, welded with steel angles of size 25 mm x 25 mm x 3mm for boarding laid over silver oak (country wood) joists of 10 cm size x 6.5 cms size spaced at abour 90 cms center to center and supported cauanna props of 10 cm to 13 cms spaced at 75 cms to center to center etc., complete complying with standard specification and as directed (SI - 155) for column, e.beam |
| 25 | for roof |
| 26 | Supplying, fabricating and placing in position inild steel or ribbed tor steel and all reinforced cement Concrete works as per the design given including cost of steel and binding wire in all floors etc complete complying with Standard (MS rods or RTS rods) which will be supplied departmentally at section stores and cost will be recovered at issue rate. The binding wire shall be supplied by the Contractor. |
| 27 | RCC 1:1.5:3 (one cement one and half sand and three machine broken stone) using 20 mm ISS gauge machine broken HBG metal for RCC works excluding cost and (abrication otreinforcement and centerning shuttering charges but including curing and providing fixtures like fan clampsin the RCC floor or Roof wherever necessary and bearing surfaces of walls sides and bottom of slab, beam etc., shall be finished smooth with cement mortar 1:3 (one cement and three sand) 12mm thick and with kraft paper without claming extra etc as directed by the departmental Officers complete complying with standard specification. |
| 28 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. |
| 29 | Plastering with cement mortar 1:5 12mm thick in all floors including curing etc., complete complying with standard specification and as directed. |
| 30 | Paving the floor with scratch proof Ceramic Tiles of any colour and any size laid in cement mortar 1:2 (one cement and two sand) 20mm thick and pointing with white cement using 0.4Kg/Sq.m. mixed with colouring pigments to suit the colour of the tiles including finishing the joints neatly complying with standard specification and as directed by departmental officers. |
| 31 | Dadooing the sides of wall using the colour printed design glazed tiles in Cm;1;2 mix,and pointing with same mortor with all cost and conveyance |
| 32 | Painting two coat over old wall surface with approved quality of Oil bound distember with colour over one coat of white cement for priming coat for base including preparation of old colour washing surface and all materials, labour charges etc |
| 33 | Painting two coat of Plastic emulsion paint over wall plastering surface with best approved first quality of approved colour over the one coat of priming etc., complete complying with standard specification (The paint should be got approved by the departmental officers before use on works ) |
| 34 | Painting two coats with new iron pant using enamal paint of approved colour over the existing priming coats etc complete complying with standard specification. |
| 35 | Supplyig and fixing in position white Glazed European water closet of best quality and approved make with 100 mm \\" P \\" or \\" S\\" trap connecting with PVC pipe of 110 mm dia double flapped ridid PVC black seat and seat cover with CP Brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws etc including supplying and fixing 10 liters capacity porcelin low level fulshing tank with a pair of CI brackets including of all charges etc complete |
| 36 | Supplying and fixing in position Indian Water closet ( Oriya type ) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\" P \\" or \\" S \\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one lime, Two sand and five brick jelly ) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes ( including the cost of 110mm dia PVC pipes for a lenth of 600mm ) by dismandling brick masontry wall to the original condition with leakages etc., complete complying with std specification . |
| 37 | 110mm pvc pipe-4ksc for sanitory work& airvent pipes |
| 38 | 110mm pvc Elbow-4ksc |
| 39 | 110mm pvc Tee |
| 40 | Supply and fixing of steel door including all charges( 0.90mx1.80)- |
| 41 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender