Tender For Repairs And Improvement Works To Amma Arangam Mini Hall At Madhavaram Milk Colony, Chennai - 51 (Re-Tender-2Nd Call).
Tender Value
5.11 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
5 days left
EMD
5200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Improvement Works To Amma Arangam Mini Hall At Madhavaram Milk Colony, Chennai - 51 (Re-Tender-2Nd Call).
BOQ
| Sl. No. | Item Description |
| 1 | Civil Works |
| 2 | Providing pest control with antitermite treatement drilling holes at junction of walls with floors at 300mm intervals and injucting chemical emulsion on those with cement etc. making holes along the vertical surface out side the walls at 150mm intervals to the depth of 450mm pointing chemical emulsion into the holes and closing holes with chemical etc. spraying all surface of treatment is to be done as per IS code no:5313/ Part III 1981 with approved chemical.(The chemical is to be used on the work should be got approved by the Executive Engineer before use on work) etc complete complying with standard specification and as directed by the departmental officers. |
| 3 | Supplying and fixing the Wall Panelling with the following specification fixing horizontally and vertically in position of wall. Fixing the water proof ply wood 9mm thick board over the country wood planks. Over the ply wood OST sheet of 4mm thick will be fixed with necessary screws and adhesives giving neat finish. The top will be finished with two coats of sanding polishing. The surface will be finished with necessary design as directed by the Departmental Officers. The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmetnal Officers. The water proof ply wood and OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 4 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 5 | Supplying & Installing perimum vertical CURTAIN BLINDS with Roller Basket specification (The Fabric and colour should be got approved by the Executive Engineer before use on works) |
| 6 | Supplying and fixing in position Indian make bevelled edge mirror of size 600mm x 450mm of approved quality and brand PVC / Fibre Glass framed 5.5mm thick mirror of following size , Shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 7 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 8 | Providing dressing table of over all dimensions - total width 3', Total height 5' 0\\", Base unit depth 1'6\\", upper unit depth 6\\" with High Density 18mm, 6mm pre laminated water-resistant board with natural wood grain laminate for the exterior and interior balancing panels, with 6mm thick high definition silver mirror mounted on High Density water-resistant board, Soft closed concealed auto-hinges for side doors and mirror shutter and telescopic smooth-closing drawer slides for base drawers. |
| 9 | Supplying and fixing in position CP Two Way Bib Cock with Heath Faucet of approved make conforming to BIS specifications and quality including cost of Shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary (Taps should be got approved by the Executive Engineer before use on the works) |
| 10 | Supplying and fixing in position best approved of BIS quality 110mm dia PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of neceSORy PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cost of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of “U” clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the departmental officers |
| 11 | Dismantling and clearing away carefully Flooring / glazed tiles etc complete complying with standard specification and as directed by the departmental officers. |
| 12 | Paving the floor with best quality Double charged vitrified Tiles of size 600mm x 600mm x 8mm and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 13 | Paving the floor with best approved quality fine polished Granite Stone Slabs of size 4' x 2', and above 18mm to 20mm thick and Variety with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) |
| 14 | Supplying and fixing Mortice Lock with required screws with 3 keys without Night latch. |
| 15 | GST at 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender