Tender For Additional Works To The Icds Centre At Seeranaikenpalayam In Ward No.75 Of West Zone.Roc.No: 5598 /2026/D1(W)
Tender Value
10 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Additional Works To The Icds Centre At Seeranaikenpalayam In Ward No.75 Of West Zone.Roc.No: 5598 /2026/D1(W)
BOQ
| Sl. No. | Item Description |
| 1 | Paving the floor with Vitrified Floor Tiles of size 60 X 60cm of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification. |
| 2 | Wiring with 2x15 Sq.mm (22/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A.F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour PVC concealed light or fan point. |
| 3 | Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 4 | Painting with plastic emulsion paint two coats along with base coat of approved quality (ISI Standard) paint as per the standard specification. (The paint to be used should be got approved by the Executive engineer before use on work) |
| 5 | PAINTING new IRON WORKS for doors, windows and Ventilators, Iron bars Weld mesh, wire mesh, screen, steel bars, flats and other similar works etc., with TWO COATS of approved first quality of synthetic enamel paint over a base coat of red oxide primer in all floors. |
| 6 | European Water Closet (Colour) with 'P' or 'S' Trap with Double Flapped seat and seatcover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internalfittings |
| 7 | Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings etc completed. |
| 8 | Supply and run off 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed CU conductor of 1100V grade in rigid PVC pipe concealed in wall and ceilling with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour |
| 9 | Painting and lettering for Child education awareness in the wall, using standard paints ,necessary colour pigments, including cost of all materials & Labour charges etc complete |
| 10 | Supplying and Fixing in position of STEEL DOOR & WINDOW using 20mm square rods at 15cm C/C and two baulstrades in one stepm centrally located and top welded to 25x 5mm flats fixing in the MS Pipe handrill and bottom fixed in step concrete firmly MS Flats of size 50mm x 6mm to be provided at the center of the balustrades connecting all the square rods to the entrote length of the balustrades including one coat of primer etc., Complete |
| 11 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. |
| 12 | Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm etc completed. |
| 13 | Supply and fixing of 450mm (18\\") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall etc completed.SD-118 |
| 14 | Supply and Fixing of Street light of 48W LED Bulb of approved brand and quality with required materials like pipe, clamp etc Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender