Tender For Providing Led Fittings, Fans, Distribution Boards And Ltug Cable Arrangements To Autonomous Office Building In Government College Of Engineering, Salem.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Nov 2026
15 days left
EMD
4500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Led Fittings, Fans, Distribution Boards And Ltug Cable Arrangements To Autonomous Office Building In Government College Of Engineering, Salem.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing of single box type 4'20 W LED flu Fitting (Higher end) complete with electronic driver with TW round block on wall or ceiling with flu. LED Tube with PVC unsheathed leads from terminals to the fitting |
| 2 | Supply and fixing of single box type 4'20 W LED flu fitting complete with electronic driver (Higher end) with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with LED tube |
| 3 | Supply and fixing of Twin box type 4'20 W flu fitting complete with electronic driver (Higher end) with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with LED tube. |
| 4 | Supply and fixing of 36W LED 2x2 square type Surface mounting type fitting LED (Higher end) Complete on wall or ceiling with suitable hanging support from ceiling with PVC unsheathed leads from terminal to the fitting |
| 5 | Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from celing with PVC unsheathed copper eads from terminals to the fitting |
| 6 | Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting |
| 7 | Supply and fixing of WT bulk head fitting with guard (Higher end) suitable with 7W/9W LED bulb |
| 8 | Supply and fixing of 1200 mm (48\\") AC ceiling fan High speed complete (Higher end) with 2 module 100W fan step regulator (Higher end) with 450 mm down rod on the existing fan clamp |
| 9 | Supply and fixing of 450 mm (18\\") (Higher end) AC wall mounted fan complete on wall with connection. |
| 10 | Supply and fixing of 300 mm (12 inch) sweep (light duty) AC exhaust fan complete necessary wall opening and making good of the wall. |
| 11 | Supply and fixing of louver shutter arrangements for 300 mm (12\\") sweep (light duty) AC exhaust fan |
| 12 | Supply and fixing of I no.6A two module 5 pin socket, 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End |
| 13 | Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure Distribution board with Double Door and INo 63 Amps DP MCB switch as incoming and 10 No's 6 Amps to 32 Amps SP MCB as outgoing in flush with wall with earth connection only. (Higher end) (UPSDB) |
| 14 | Supply and fixing of 4 way Horizontal TPN MCB sheet steel enclosure Distribution board with double door (Metal) with 1 No 63A FP MCB as incoming and 6 Nos 32A DP MCB as outgoing inflush with wall with earth connection only. (Higher end) |
| 15 | Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 6 way provision for accomodating one no. 4 pole ELCB / RCD (totally 6 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators (totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm with the following inflush with wall with earth connection only. (SD-637) (Main Lighting DB for each floor) Incoming: 63A FP MCB & 63A ELCB 1 No., Outgoing: 32A SP MCB-18 Nos. |
| 16 | Supply and Fixing of 3 Ph 8 way Vertical type MCCB DB with IP 43 protection Double door type DB (legrand) with 1No 125A 4P MCCB 16KA as incoming and 6 No's 63A TP MCB 10 KA & 2 No's 32A TP MCB 10 KA as outgoing with cable entry box on suitable angle iron frame on wall with earth connection only. (Higher end) (Main Lighting Sub Switch Board for entire block) & MPDB |
| 17 | Supply and fixing of 48W LED street light fitting with heat resistant toughened glass with IP 65 Prtection in suitable dia GI pipe (Class 'B') complete on the existing post or wall with PVC unsheathed Copper leads MS clamps and aluminium painting (Higher end) |
| 18 | Supply and run of 2 of 10 sq mm PVC insulated SC unsheathed FRLS copper Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contineous earth wire connection of 10.00 sqmm copper wire and making good of the concealed portion with suitable colour. |
| 19 | Supply and laying of 3 1/2 X 70 sq mm PVC armoured LTUG cable in suitable size of HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 20 | Supply and clamping of 3 1/2 X 70 sq mm PVC armoured LTUG cable on post or on wall with MS Clamps. |
| 21 | Supply and fixing of brass cable gland for 3 1/2 X 70 sq mm PVC LTUG armoured cable with earth connection |
| 22 | Supply and providing cable end termination of 3 1/2 X 70 sq mm PVC LTUG Aluminum armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete |
| 23 | Supply and fixing of LT cable route indicator with suitable angle not less than 38mm x 38mm x6mm and 0.6 mtr long excavation of earth to a depth of 0.6 mtr and concreting the ground level and making good of the ground as directed by the departmental officers |
| 24 | Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with earth copper plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry |
| 25 | Supply and run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall/floor/ground for earth connection |
| 26 | Supply and run of 1\\" x 1/8\\" copper flat (Earth Bus) of 30 cm length on suitable bus insulators with necessary bolt and nuts Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender