Tender For Construction Of Entrance Gate Of Chowgan With Adjoining Wall Oppsite Dak Banglow Kishtwar Under Cdf Scheme Of Sushri Shagun Parihar Honble Mla Kishtwar During The Financial Year 2026-27
Tender Value
10 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
7 days left
EMD
20000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kishtwar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Entrance Gate Of Chowgan With Adjoining Wall Oppsite Dak Banglow Kishtwar Under Cdf Scheme Of Sushri Shagun Parihar Honble Mla Kishtwar During The Financial Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 15.2.1 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: 15.7.4 In cement mortar |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 15.2.1 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed: 2.8.1 All kinds of soil : |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:4.4.7 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 5.2.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 8.3.2 Granite Work |
| 11 | Marble work gang saw cut (polished and machine cut) of thickness 16 mm for wall lining (veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1 cement: 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). 8.1.1 Raj Nagar plain white marble/Udaipur green marble/zebra black marble 8.1.1.2 (Area of slab over 0.5 sqm) |
| 12 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 13 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 14 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: 7.1.1 Cement mortar 1:6 (1 Cement : 6 coarse sand) Full Rate |
| 15 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Labour Rate |
| 16 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : 6.1.5 Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 17 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls 5.16.1.1 Under 20 cm wide |
| 23 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.2.2 Welded |
| 24 | Providing coloured coated high ribbed profile G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.6 0.50 mm thick with zinc coating not less than 275 gram/m2 Complete JOB |
| 25 | Providing and fixing complete Kashmiri-style architectural boarding for one longer/main gate of 3.80 m clear span and one shorter/pedestrian gate of 1.80 m clear span, entirely in well-seasoned, kiln-dried and preservative-treated first-class Himalayan Deodar wood (Cedrus deodara), including solid Deodar boarding/panelling, intricately carved/CNC-cut Kashmiri jali, decorative gable and infill panels, floral/geometrical carving, Deodar fascia, cornices, borders, beads and mouldings, carved Chinar-leaf and other traditional Kashmiri ornamental motifs, decorative brackets, side ornaments and finials; including Deodar backing/batten framework wherever required, all cutting, sawing, dressing, planing, shaping, routing, carving, jointing, sanding and fitting; fixing with concealed stainless-steel/brass screws, dowels, approved adhesive and necessary hardware; preservative treatment, wood sealer and minimum three coats of exterior-grade weather-resistant and UV-resistant PU finish; including all skilled carpentry, carving/CNC workmanship, scaffolding, setting out, alignment, wastage, consumables, fixing and finishing. The item shall also include providing and installing suitable exterior-grade warm-white LED decorative lighting integrated with the boarding, including LED fixtures/fittings, concealed electrical wiring, conduits, junction boxes, connectors, LED drivers/SMPS, mounting accessories, switches/control gear, necessary earthing, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. All works shall be executed as per approved architectural design and reference elevation. Excluding the three supporting pillars, RCC/masonry works, foundations, structural steel frame and gate shutters.\\" Complete JOB |
| 26 | Add provision for foundation/inauguration stone Complete Job |
| 27 | Carriage of Mulba at an average lead of 5 km by MT |
| 28 | Carriage of Sand at an average lead of 30 km by MT |
| 29 | Carriage of stone aggregate below 40mm nominal size at an average lead of 07 km by MT |
| 30 | Carriage of stone aggregate Above 40mm nominal size at an average lead of 07 km by MT |
| 31 | Carriage of Stone at an avg. distance of 05 Kms By MT |
| 32 | Carriage of Bricks at an average lead of 210 km by MT Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender