Tender For Development Of Adarsh Dramatic Club On Pattern Of Audiotorium By Way On Completion Of Truss Work Ceiling Facilities Side Walling And Tile Flooring Phase Ist Under Cdf Scheme Of Sushri Shagun Parihar Honble Mla Kishtwar During The Financial
Tender Value
30 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
10 days left
EMD
60000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kishtwar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Adarsh Dramatic Club On Pattern Of Audiotorium By Way On Completion Of Truss Work Ceiling Facilities Side Walling And Tile Flooring Phase Ist Under Cdf Scheme Of Sushri Shagun Parihar Honble Mla Kishtwar During The Financial Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : 15.13.1 Of area of 3 sqm. and below |
| 2 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: 15.7.4 In cement mortar |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 15.2.1 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : 6.1.5 Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 6 | Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level |
| 7 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes |
| 8 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm diafully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 31.20.1 With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. |
| 9 | Electric Wiring with 1.5 & 2.5,4.0mm sqmm copper cable including 20mm dia 2mm thick PVC Pipe 5 amp with sunken box and connection to the main pole with 4 sqmm wire with modular fittings of heater point, tv point, switch point, indicators, fuse etc and main junction with MCB complete job incl commissioning as directed engineer in charge.complete job |
| 10 | Providing, supplying and fixing 600×600 mm, 36–40 W LED panel light, recessed type, suitable for suspended T-grid false ceiling, complete with aluminium frame, high-efficiency LED module, opal diffuser and compatible LED driver, including transportation and handling, removal and refixing of ceiling tile, positioning, alignment and securing of light in the existing T-grid, necessary fixing hardware, connectors, lugs and minor consumables, testing and commissioning, complete as directed by Engineer-in-Charge, but excluding electrical wiring, conduit and switches Complete job |
| 11 | Providing, supplying and fixing 1200 mm (48\\") three-bladed ceiling fan of approved make and model, energy-efficient type, complete with motor, blades, canopy, down rod, ceiling hook/support, clamps, coupling, nuts, bolts, washers, split pins and all necessary accessories, including assembling, erection, alignment, testing and commissioning, labour and incidental materials, complete in all respects, but excluding electrical wiring, conduit, switches, regulator and switchboard. Complete Job |
| 12 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm thick9.10.5 Second class Kail wood |
| 13 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mfor doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 9.28.5 Second class Kail wood |
| 14 | Filling of stone in horizintal level incl cost of stone incl ramming, watering etc complete job as per the directions of engineer in charge. |
| 15 | Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 16 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. |
| 17 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size |
| 18 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:4.4.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 19 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 20 | Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. |
| 21 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.6 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 22 | Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 23 | Add Provision for Foundation/ inaugration Stone Complete JobPainting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 24 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 9.99.2 250x10 mm |
| 25 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 9.102.1 125 mm |
| 26 | Applying priming coat: 13.58.1 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 27 | Centering and shuttering including strutting, propping etc. and removal of form work for: 4.6.2 Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc. |
| 28 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kind of soil |
| 29 | Providing and fixing 12\\"/15\\" sweep heavy-duty exhaust fan, 230 V, 50 Hz, single phase, complete with electric motor, fan blades, body/frame, shutter/louver and standard accessories, including necessary MS/GI mounting frame/brackets, nuts, bolts, fasteners, making suitable opening in masonry wall, cutting/chiselling, making good the edges, installation, alignment, testing and commissioning complete, but excluding electrical wiring, conduit and switch, all complete as directed by Engineer-in-Charge.Complete Job |
| 30 | Providing and fixing PVC pipe 8\\" dia of minimum pressure 4kg/sqcm complete job as per the directions of engineer in charge Complete Job |
| 31 | Add Provision for Foundation/ inaugration Stone Complete Job |
| 32 | Disposal of Mulba at an average lead of 5 km by MT |
| 33 | Sand at an average lead of 30 km by MT |
| 34 | Bajri below 40 mm at an average lead of 7 km by MT |
| 35 | Kota stone at an average lead of 5 km by MT |
| 36 | Bricks at an average lead of 210 km by MT |
| 37 | Stone at an average lead of 5 km by MT Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender