Tender For Development Of Founain Spring At Pranbhawan (B) Ward No 10 Mc Mattan (Civil Part Only) Advt.Cost=₹73.88 Lacs, Amount Without Gst= ₹62.61 Lacs, Gst Amount= ₹11.27 Lacs
Tender Value
73.88 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
6 days left
EMD
1.47 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Founain Spring At Pranbhawan (B) Ward No 10 Mc Mattan (Civil Part Only) Advt.Cost=₹73.88 Lacs, Amount Without Gst= ₹62.61 Lacs, Gst Amount= ₹11.27 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Temporary closure of inflow drain into fountain spring, diverting of incoming water to another drain and dewatering of the spring by natural flow and creating temporary drains for water diversion during civil work inside the spring complete job by any means labour/machinery or pumps etc as per directions of engineer in charge: (Job to be given as per enclosed estimate) |
| 2 | Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively) Wet Avg (4\\" deep) |
| 3 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead. |
| 4 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 5 | Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) |
| 6 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Rough chisel dressed |
| 7 | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) |
| 8 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
| 9 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil |
| 10 | Providing and laying of stone soling, ramming, compaction and proper dressing, incl carriage complete job |
| 11 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone |
| 12 | Providing and laying in position specified grade of cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 13 | P/L 50 MM Thick Cement concrete flooring of 1:2:4 mix including cost of centering and shuttering with 20 mm n/s of stone aggregates and carriage of material upto site all complete. |
| 14 | 12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand) |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 16 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 4 coarse sand) |
| 17 | 40mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size and top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) volume including cement slurry and curing complete : Light shade pigment with white cement. |
| 18 | Structural steel work in built up sections, trusses and framed work, trashguard/ screen/ safety lock system/ MS Grill for compond wall incl (Grill) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 20 | Provision of all labor, materials, tools, carriage etc all and equipment for the supply, installation, testing, and commissioning of a precast white 3 tier RCC sandstone fountain head, measuring 7 feet in height, to be installed on top the fountain pedestal, in compliance with relevant technical specifications and contractual requirements |
| 21 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 22 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo Mechanically Treated bars of grade Fe-500D or more. |
| 23 | CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking Silt to MC dumping site upto 2 Km |
| 24 | CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading Sand and Stone Agg for an average lead of 15 kms |
| 25 | BRICKS 5KM LEAD MATTAN KLIN |
| 26 | Geotag Photos and Signboard etc Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender