Tender For General-Pd Manikanteswaram Devaswom In Kottarakkara Group-Clearing Jungle From The Temple Pond Yard And Surrounding Areas Within The Devaswom Compound, Supplying Foldable Type Tent For The Police Aid Post In Connection With M&M Festival In
Tender Overview
Project Description
Tender for General-Pd Manikanteswaram Devaswom In Kottarakkara Group-Clearing Jungle From The Temple Pond Yard And Surrounding Areas Within The Devaswom Compound, Supplying Foldable Type Tent For The Police Aid Post In Connection With M&M Festival In 1202Me, And Repair And Maintenance Works To The Staff Toilet Near The Ao Office, Closing Leakages To The Roof Of The Audit Office Building-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Appendix A- Clearing the temple pond and surrounding area |
| 2 | 2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 3 | OD169137/2026-2027:Bailing out water from the well including clearing vegetation from inside portion of the well |
| 4 | OD169143/2026-2027:Clearing and removing ampal mose, Water lentils,etc.,from the pond to the outsidearea as per the direction of the Engineer-in-charge-man coolie |
| 5 | OD169146/2026-2027:Cutting and removing branches of trees including labour charges for cutting andremoving small size banyan tree at the face of retaining wall ,kettuchangadam,scaffoldings,etc.,, man coolie |
| 6 | OD169178/2026-2027:Levelling or erecting slanted frames of green net to prevent the entry of mose and water lentils, etc., into the bathing ghat, including properly stretching, tightening and securely fastening the existing green net to the frames without causing any damage to the net, complete as directed-Man coolie |
| 7 | 50.18.9.14.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall |
| 8 | Appendix B- Supplying foldable type tent for police AID post and providing banners and sign board |
| 9 | OD178705/2026-2027:Supplying Foldable type Tent of 10ftx10ft (3x3m) size for the use of Police AID post |
| 10 | OD178832/2026-2027:Engaging labour for the erection of the tent at the suitable location, dismantling it after use, and handing over to the Administrative Officer as per direction of the Engineer-in-charge-Man coolie |
| 11 | OD174504/2026-2027:Supplying and fixing flex board at suitable locations as per direction of the Engineer-in-charge |
| 12 | Appendix C- Repairs and maintenance to the staff toilet ,closing leakages to the Audit office building |
| 13 | 15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 14 | OD174363/2026-2027:Supplying MP Ist class roofing tiles of 410x235mm or nearest available size (single groove) |
| 15 | OD174364/2026-2027:Supplying new MP tiles,hip and ridge tiles 400m or nearest available size including cost of conveyance etc complete |
| 16 | 50.9.14.1:Supplying and fixing Anjily wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc. complete. |
| 17 | OD174370/2026-2027:Laying MP tiles, hip and ridge tiles instead of missed ones for staff toilet -Mason class2 |
| 18 | OD174408/2026-2027:Assisting Man coolie for laying MP tiles, hip and ridge tiles instead of missed ones for staff toilet -Man coolie |
| 19 | OD174489/2026-2027:Roofing Departmental MP tiles 410x235 mm or nearest available size (Single groove) |
| 20 | 15.23.2:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm |
| 21 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 22 | 11.46.2:Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm |
| 23 | OD174384/2026-2027:Engaging labour for repairs maintenance to the existing roof members and repairs to the existing door-Carpenter 2 nd class |
| 24 | 50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall |
| 25 | 50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. |
| 26 | 50.17.1.2:Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. |
| 27 | 15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below |
| 28 | 50.6.1.6:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level thickness 20cm and above in : CM 1:6 ( 1 cement : 6 coarse sand sand) etc complete |
| 29 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 30 | 18.58.2.1:Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round grating |
| 31 | 13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm |
| 32 | 9.123:Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogeneous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge. |
| 33 | 9.124.2:Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm, painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (Push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer -in-charge.Decorative finish (both side wood grained finish) |
| 34 | OD175600/2026-2027:Washing and cleaning the toilet rooms including floors and walls, using suitable acid/stain remover, wire brush, bleaching powder, etc., to remove stains, dirt and deposits, complete as directed by the Engineer-in-Charge. |
| 35 | 18.21.2.1:Providing and fixing uplasticised PVC connection pipe with brass unions:45 cm length15 mm nominal bore |
| 36 | 18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore |
| 37 | 17.7.7:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap |
| 38 | 50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. |
| 39 | 50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop |
| 40 | 50.9.15.5:Providing and fixing iron hooks and eyes: 100 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender