Supply Of Procurement of various types of train stickers. => Limited

Sharing tender

Supply Of procurement of various types of train stickers. , step 1, break for emergency exit1) sticker size- i. label size - 70 mm x 300 mm ii. thickness - 0.225mm ±15% 2) material- cast vinyl (glow in dark) 3) visibility- minimum 2 hours in dark, standard for photoluminescent .: astm e-2072 4) flammability standard- en 45545-2 / r7-hl- 3 5) dmrc drawing no.: dmrc/rs/spd/cptd/dev/042/088 (rev-00) note: for detail specification ple ase refer sticker specification document (rev.01) ] , for ladies only1) sticker size- i. label size - 640 mm x 125 mm ii. thickness - 0.17 mm ±20% 2) material- cast vinyl 3) flammability standard- en 45545-2 / r7-hl-3 4) dmrc drawing no.: dmrc/rs/0018 (rev-02) note: for detail specification please refer sticker specification documen t (rev.01) ] , for your own safety1) sticker size- i. label size - 290 mm x 90 mm ii. thickness - 0.17mm ±20% 2) material- cast vinyl 3) flammability standard-en 45545-2 / r7-hl-3 4) dmrc draw ing no.: dmrc/rs/0032 (rev-02) note: for detail specification please refer sticker specification docu ment (rev.01) ] , sitting on the floor is prohibited1) sticker size- i. label size - 140 mm x 175 m m ii. thickness - 0.17mm ±20% 2) material- cast vinyl 3) flammability standard- en 45545-2 / r7- hl-3 4) dmrc drawing no.: dmrc/rs/spd/cptd/dev/042/072 (rev-02) note: for detail specification please refer sticker specification document (rev.01) ] , carrying baggage1) sticker size- i. label size - 160 mm x 175 mm ii. thickness - 0 .17mm ±20% 2) material- cast vinyl 3) flammability standard- en 45545-2 / r7-hl-3 4) dmrc drawi ng no.: dmrc/rs/spd/cptd/dev/042/073 (rev-01) note: for detail specification please refer sticker specification document (rev.01) ] , sitting or standing is prohibited in gangangway 1) sticker size- i. label size - 200 mm x 175 mm ii. thickness - 0.17mm ±20% 2) material- cast vinyl 3) flammability standard- e n 45545-2 / r7-hl-3 4) dmrc drawing no.: dmrc/rs/spd/cptd/dev/042/071 (rev-02) note: for det ail specification please refer sticker specification document (rev.01) ] , 24x7 helpline numbers (hindi)1) sticker size- i. label size - 415 mm x 100 mm ii. t hickness - 0.17mm ±20% 2) material- cast vinyl 3) flammability standard-en 45545-2 / r7-hl-3 4) dmrc drawing no.: dmrc/rs/spd/cptd/dev/042/077 (rev-04) note: for detail specification please r efer sticker specification document (rev.01) ] , sticker persons with disabilities male/female) 1) sticker size- i. label size - 400 m m x 40 mm ii. thickness - 0.17mm ±20% 2) material- cast vinyl standard for photoluminescent .: as tm e-2072 3) flammability standard- en 45545-2 / r7-hl-3 4) dmrc drawing no.: dmrc/rs/spd/cp td/dev/042/112(rev-00) note: for detail specification please refer sticker specification document (r ev.01) ] , press the button to speak to driver (rs11) sticker size- i. label size - 145 mm x 50 mm ii. thickness - 0.17mm ±20% 2) material- cast vinyl 3) flammability standard-en 45545-2 / r7-hl-3 4) dmrc drawing no.: dmrc/rs/spd/cptd/dev/042/115 (rev-00) note: for detail specificati on please refer sticker specification document (rev.01) ] , speak to driver (rs1 & rs3)1) sticker size- i. label size - 100 mm x 40 mm ii. thic kness - 0.17mm ±20% 2) material- cast vinyl 3) flammability standard-en 45545-2 / r7-hl-3 4) dm rc drawing no.: dmrc/rs/spd/cptd/dev/042/116 (rev-00) note: for detail specification please refe r sticker specification document (rev.01) ] , how to open detrainment door1) sticker size- i. label size - 100 mm x 780 mm ii. thickness - 0.225mm ±15% 2) material- cast vinyl (glow in dark) 3) visibility- minimum 2 hours in dark, standard for photoluminescent .: astm e-2072 4) flammability standard- en 45545-2 / r7-hl- 3 5)dmrc drawing no.: dmrc/rs/spd/cptd/dev/042/086 (rev-00) note: for detail specification plea se refer sticker specification document (rev.01) ] , step 2, turn1) sticker size- i. label size - 100 mm x 150 mm ii. thickness - 0.225m m ±15% 2) material- cast vinyl (glow in dark) 3) visibility- minimum 2 hours in dark, standard for ph otoluminescent .: astm e-2072 4) flammability standard- en 45545-2 / r7-hl-3 5)dmrc drawing no .: dmrc/rs/spd/cptd/dev/042/089 (rev-00) note: for detail specification please refer sticker specifi cation document (rev.01) ] , step 3, lift up1) sticker size- i. label size - 90 mm x 160 mm ii. thickness - 0.225m m ±15% 2) material- cast vinyl (glow in dark) 3) visibility- minimum 2 hours in dark, standard for ph otoluminescent .: astm e-2072 4) flammability standard- en 45545-2 / r7-hl-3 5) dmrc drawing n o.: dmrc/rs/spd/cptd/dev/042/090 (rev-00) note: for detail specification please refer sticker speci fication document (rev.01) ] , step 4, open1) sticker size- i. label size - 100 mm x 100 mm ii. thickness - 0.225m m ±15% 2) material- cast vinyl (glow in dark) 3) visibility- minimum 2 hours in dark, standard for ph otoluminescent .: astm e-2072 4) flammability standard- en 45545-2 / r7-hl-3 5)dmrc drawing no .: dmrc/rs/spd/cptd/dev/042/091 (rev-00) note: for detail specification please refer sticker specifi cation document (rev.01) ] , step 5, lift & push (left)1) sticker size- i. label size - 135 mm x 95 mm ii. thickne ss - 0.225mm ±15% 2) material- cast vinyl (glow in dark) 3) visibility- minimum 2 hours in dark, sta ndard for photoluminescent .: astm e-2072 4) flammability standard- en 45545-2 / r7-hl-3 5) dmr c drawing no.: dmrc/rs/spd/cptd/dev/042/092 (rev-00) note: for detail specification please refer sticker specification document (rev.01) ] , step 5, lift & push (right)1) sticker size- i. label size - 135 mm x 95 mm ii. thickn ess - 0.225mm ±15% 2) material- cast vinyl (glow in dark) 3) visibility- minimum 2 hours in dark, st andard for photoluminescent .: astm e-2072 4) flammability standard- en 45545-2 / r7-hl-3 5) dm rc drawing no.: dmrc/rs/spd/cptd/dev/042/093 (rev-00) note: for detail specification please refe r sticker specification document (rev.01) ] , step 6, push (left)1) sticker size- i. label size - 100 mm x 120 mm ii. thickness - 0. 225mm ±15% 2) material- cast vinyl (glow in dark) 3) visibility- minimum 2 hours in dark, standard for photoluminescent .: astm e-2072 4) flammability standard- en 45545-2 / r7-hl-3 5)dmrc drawi ng no.: dmrc/rs/spd/cptd/dev/042/096 (rev-00) note: for detail specification please refer sticker specification document (rev.01) ] , step 6, push (right)1) sticker size- i. label size - 100 mm x 120 mm ii. thickness - 0.225mm ±15% 2) material- cast vinyl (glow in dark) 3) visibility- minimum 2 hours in dark, standar d for photoluminescent .: astm e-2072 4) flammability standard- en 45545-2 / r7-hl-3 5)dmrc dra wing no.: dmrc/rs/spd/cptd/dev/042/097 (rev-00) note: for detail specification please refer sticke r specification document (rev.01) ] , wait until the lever is unlocked1) sticker size- i. label size - 100 mm x 780 m m ii. thickness - 0.225mm ±15% 2) material- cast vinyl (glow in dark) 3) visibility- minimum 2 hours in dark, standard for photoluminescent .: astm e-2072 4) flammability standard- en 45545-2 / r7-h l-3 5)dmrc drawing no.: dmrc/rs/spd/cptd/dev/042/098 (rev-00) note: for detail specification pl ease refer sticker specification document (rev.01) ] , emergency call button1) sticker size- i. label size - 185 mm x 157 mm ii. thickn ess - 0.225mm ±15% 2) material- cast vinyl (glow in dark) 3) visibility- minimum 2 hours in dark, st andard for photoluminescent .: astm e-2072 4) flammability standard- en 45545-2 / r7-hl-3 5)dmr c drawing no.: dmrc/rs/spd/cptd/dev/042/099 (rev-00) note: for detail specification please refer sticker specification document (rev.01) ] , edge of cover1) sticker size- i. label size - 233 mm x 233 mm ii. thickness - 0.225 mm ±15% 2) material- cast vinyl (glow in dark) 3) visibility- minimum 2 hours in dark, standard for photoluminescent .: astm e-2072 4) flammability standard- en 45545-2 / r7-hl-3 5)dmrc drawing no.: dmrc/rs/spd/cptd/dev/042/101 (rev-00) note: for detail specification please refer sticker spe cification document (rev.01) ] , do not place objects or sit herea. color- as per pantone shade match i. black - black ii. yellow - yellow 123c ill. red - red 032c b. material- cast vinyl c.printing-eco-friendly, water based technology, prints are odorless and without any voc emission & uv resistant. d. finishing - fil m laminate or anti graffiti. e. font: i. english - arial ii. hindi - dev lys040 f. dmrc drawing no.: dmrc /rs/kkd/mech/01 (rev-00) note: for detail specification please refer sticker specification document (rev.01) ]