Tender For Certain B/R Repairs At Demo Bn, Bso Yard And Aro At Age B/R-Iv Under Ge (Awc) Mhow
Tender Value
30 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
21 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain B/R Repairs At Demo Bn, Bso Yard And Aro At Age B/R-Iv Under Ge (Awc) Mhow
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick or stone/boulder masonry, built in cement mortar including coping etc, complete all as specified and directed. |
| 2 | M&L for brick work with fly ash bricks, straight or curved on plan to any radius, built in cement mortar 1:4 using old size bricks complete all as specified and directed. |
| 3 | M&L Rendering on fair faces of brick work or concrete surfaces of wall 15 mm thick in CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | Taking down existing cement plaster in cement mortar on brick/stone masonry walls etc including racking out joints, hacking for key, scrubbing down with water, rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering complete all as specified and directed. |
| 5 | M&L rendering 15mm thick on brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement complete all as specified and directed. |
| 6 | Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified. |
| 7 | M&L for applying two coats of Acrylic distemper on wall or ceiling concrete surfaces over & including a coat of preparatory primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 8 | M&L Machine cut Kota stone slab flooring 18-20 mm thick jointed with grey cement slurry mixed with pigment to match the shade of the slab incl proper edge moulding, rubbing & mirror-polishing incl screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying of kota stone incl dismantling of old floor kota stone including bedding (but not backing), and rubbish off premises or removed to store complete all as specified and directed. |
| 9 | M&L Machine cut Kota stone slab 18-20 mm thick as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of the slab proper edge moulding, rubbing & mirror-polishing incl rendering 10 mm thick in cement mortar 1 : 4 for fixing of kota stone incl dismantling of old kota stone & rendering upto wall surface and rubbish off premises or removing to store complete all as specified and directed. |
| 10 | M & L Light/ Dark shade Endura Vitrified tiles 12/10 mm thick (square/rectangular) area of each tiles n exc 0.36 Sqm coloured cut to required size set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor incl screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying of floor tiles incl dismantling of old tiles including bedding (but not backing), and rubbish off premises or removed to store complete all as specified and directed. |
| 11 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m as directed by the Engineer in Charge. |
| 12 | M &L for Cement concrete type B2, 1:4:8 (using 40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and as directed. |
| 13 | M & L for glazed finish chequred cement concrete coloured tiles of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry (with gray cement and pigment) after and including 20 mm thick in cement plaster in CM (1:6) for fixing tiles complete all as directed. |
| 14 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35conforming to IS 15658-2006 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of crushed stone, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 15 | Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 16 | Taking down Shutters of any description exc 1 sqm but n. exc 2 sq. m each of any description complete all as specified and directed. |
| 17 | Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 18 | M&L Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including ms flat for hold fast as per SSR part-I complete all as specified and directed. |
| 19 | M&L Cutting holes in brick walls exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed. |
| 20 | S&F Flush shutters 35 mm thick, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 21 | S & F 35 mm thick second class hardwood rail and style , Plain, framed, panelled shutters Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 22 | S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive with wire mesh gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) complete all as specified and as directed. |
| 23 | S&F Solid single PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, edges will be painted to match with prelam sheet suppling & fixing in opening as per specification & drawing including all fixtures shown on drawing. |
| 24 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site complete as per specification & drawing |
| 25 | S & F Powder coated Aluminium ventilator, fixed type without sash bar, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc. including 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion complete all as specified. |
| 26 | S & F powder coated aluminium sliding glazed windows with three track , three shutter sliding with following specification and making good the adjacent side etc . shifting of existing cooler stand where required complete all as specified and as directed (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick.(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(iv) 4 mm thick tinted glass superior quality.(v) IDPE Rubber gasket for fixing of glass.(vi) Locking cleats per shutter -01 Nos.(vii) Sliding rollers per shutter - 02 Nos.(viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos.(Ix) fixing screw for frame with wall per windows- 08 Nos |
| 27 | S & F Powder coated aluminum door with the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a) Cross section of chowkhat frame 101.60x44.45x2mm thick. (b) Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d) Bottom rail of cross section 114x44x2mm thick.(e) Locking rail (middle rail ) of cross section 83x44x2mm thick. (f) Top 4.8mm thick tinted glas. (g) Powder coated aluminum Aluminium handle type -02 Nos per shutter ( inside & out side). (h) Stainless steel Grade 304 door stopper heavy duty-01 Nos per shutter. (i) Powder coated aluminum tower bolt 200mm long-01 Nos per shutter (inside). (j) Lock with key superior quality make and type as approved by GE openable both from inside & out side -01 Nos per shutter. (k) Bottom12 mm both side laminated particle board. Note : Fabrication of aluminum door shall be done by authorized fabricator. |
| 28 | S&F E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and painted with two coats of oil bound distemper incl making good all the disturbed portion complete all as specifed & directed by GE/Eng-in-Charge. |
| 29 | S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section. |
| 30 | S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 31 | S&F 250 mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 32 | S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified . |
| 33 | S&F100mm size, butt hinges, medium weight, cold rolled mild steel. |
| 34 | S&F 150mm size extruded aluminium alloy handles, fabricated type anodised |
| 35 | S&F 125mm size extruded aluminium alloy handles, fabricated type anodised. |
| 36 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 37 | S&F, solid PVC wall panelling consisting of 5mm thick wood grain painted PVC sheet including fillet of size 5X35mm inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 38 | S&F mild steel 150 mm ordinary rat tail/ Helical door springs including roller and roller plate complete fixed in repair steel chowkhats a with necessary flat iron cleat by welding or drilling with necessary nut, bolts etc complete all as specified and directed. |
| 39 | S& F 18 mm thick factory made PVC sheet one side pre laminated sheet kitchen cabinet shutter/cupboard shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for making edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding etc complete all as specified and directed |
| 40 | S&F factory made PVC shelf/partition of required size consisting of panel of 12 mm thick celuka PVC ply and for supporting the hold of shelf/partition and shall provide 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the front of the shelf / partition to be edge lipped by 18mm width x 1 mm thick PVC sheet of density 600kg/cum manufactured by ISO 9001-2015 Certified company using solvent cement etc complete all as specified and as directed. |
| 41 | M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed. |
| 42 | S&F in repair Looking Mirror 5.5 mm thick of selected quality glass bevelled edge, backing with multi-layer coating system of Silver/ Aluminium/ Polypropylene adhesive film or any pro-active paint and fixed with chromium plated brass screw and cup washers complete as specified and directed. |
| 43 | S& F 100 mm size MS mat/glossy finish handle complete all as specfied and directed . |
| 44 | S & F Continuous (piano) hinges,mild steel, bright finish or electro galvanised, Width of flaps (when open) in 30 mm etc complete all as specified and directed. |
| 45 | S & F in repair brass 2-levers locks for cupboard, grade I of size 50mm complete all as specified and directed. |
| 46 | S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and brass polished complete all as specified and directed. |
| 47 | S&F fanlight magnetic catch with 14mm catch cast brass and fixed to cupboard shutters all as specified and as directed |
| 48 | S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and directed. |
| 49 | Material and labour Preparation old wooden surfaces of any description over 10 cms width or girth not otherwise described and applying one coat of synthetic enamel paint . |
| 50 | S&F in repair Stainless steel curtain rod/rail 25 mm dia medium weight with premium quality incl SS brackets with decorative caps complete all as specified & directed. |
| 51 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 52 | M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty and fitted in wooden / steel window in square n exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 53 | M&L for 3mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 54 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs i.e. Incl removal of old unserviceable wire cloth complete all as specified and as directed. |
| 55 | S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs i.e. Incl removal of old unserviceable wire cloth complete all as specified and as directed. |
| 56 | M & L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed |
| 57 | Taking up or down GI tubing 15mm bore and connections from walls and ceiling or laid in floor including cleaning for refixing or removal to store all as directed. |
| 58 | Re-fixing old serviceable steel tubing 15mm bore and supply of new fittings as required at site and fixed in new or old position (walls, ceiling, floors, etc.) all as directed. |
| 59 | S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall, ceiling or laid in floor with suitable clamps & nuts etc all as directed. |
| 60 | Taking up or down GI tubing 20mm bore and connections from walls and ceiling or laid in floor including cleaning for refixing or removal to store all as directed. |
| 61 | Re-fixing old serviceable steel tubing 20mm bore and supply of new fittings as required at site and fixed in new or old position (walls, ceiling, floors, etc.) all as directed. |
| 62 | S&F in repair laying and testing for 20 mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceiling or laid in floors complete all as specifed and directed. |
| 63 | S & F in repair of CPVC 20 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and as directed. |
| 64 | S & F of in repair CPVC 25 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and as directed. |
| 65 | S & F of CPVC brass elbow (3/4\\" X ½\\") for 20 mm outer dia CPVC pipe complete all as specified and directed. |
| 66 | S & F of CPVC Male Brass Threaded Adaptor (MTA/ MBTA) for 25 mm outer dia pipe complete all as specified and directed. |
| 67 | S & F of CPVC Tank Adaptor for 25 mm outer dia pipe complete all as specified and directed. |
| 68 | S & F of CPVC union for 25 mm outer dia pipe complete all as specified and as directed. |
| 69 | S & F of CPVC Ball Valve for 25 mm outer dia pipe complete all as specified and directed. |
| 70 | S&F in repair vitreous china squatting pan (orissa pattern) size 580mmx440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding flushing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and as directed. |
| 71 | S & Fix in repair Vitreous china, (Single piece with flushing cistern) wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc complete all as specified and as directed. |
| 72 | S & Fix in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc complete all as specified and as directed. |
| 73 | Attending complaints of leaking / unserviceable pillar cock, Wall mixer, WHB Mixer, bib taps,two way bib taps, stop valves, 15mm - 20mm dia for making it fully functional and leak proof by carefully including taking down, replacing minor unserviceable parts such as rubber washer, leather washers, jumpers brass 15mm - 20mm size complete all as directed and specified. Note:(1) Major parts such as Spindles / phases of CP pillar cocks, wall mixer, WHB mixer,Two way bib taps,CP bib cocks , Angle cocks replaced if any shall be measured and paid for separately under respective items. Note no:(02 ):- Only Attending day by day complaints in slip up to (4 to 6 ) Nos (Per slip Count as one unit) incase nature of complaints more than 06 nos a separate complaints slip will be generated and paid each complaints slip. Note no (03) :- The Note no 02 will be applicable from item No. 73 & 74 of this BOQ. Note no:(04):-The contractor or his represantative will report in complaint cell to receive the complaints in the morning by 0900hrs with necessary daily stores are required to attend day to day complaints Note no:(05):-The complaints should be attended/completed within 48hours after receiving the complaint slip failing which penalty of Rs. 800/- (eight hundred only) will be recovered for each complaint per day from the contractor payment.Note no:(06):-The cost of 01x plumber should be deemed to be included in the item rates quoted by the contractor |
| 74 | Attending complaints of leaking / unserviceable , low level flushing cisterns, PVC or chinaware for making it fully functional and leak proof by replacing the defective parts such as rubber washers,PVC levers, PVC/ CP knobs/pvc kit if required complete all as directed and specified. including GI & UPVC |
| 75 | S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle , flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and as directed. |
| 76 | S&F in repairs vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and as directed. |
| 77 | S&F in repair 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws.complete all as specified and directed |
| 78 | S&F in repair chromium plated brass Central hole basinmixer without popup waste system complete screwd down for15 mm GI bore pipe complete all as specified and as directed. |
| 79 | S&F in repair 20mm dia brass chromium plated tubular towel rails,D type, 60cm long between flanges,complete all as specified and as directed. |
| 80 | S&F in repairs Health Faucet ABS with Rubbit Cleaning System , 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specified and as directed. |
| 81 | S&F in repair 110 mm dia Cast iron nahani trap with CP grating including including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed |
| 82 | S&F in repair stainless steel kitchen plate rack size 600 x 900 x150 mm of approved pattern made out of stainless steel sheet 0.63 mm thick sheet with round 8mm dia rods including hanging arrangements complete all as specified and as directed. |
| 83 | S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed. |
| 84 | S&F in repair Grating 100 mm dia of CP with or without hole complete all as specified and directed. |
| 85 | S&F in repair 15 mm dia bib tap long body cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed. |
| 86 | S&F in repair bib taps Chromium plated brass/ cast copper alloy fancy type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed. |
| 87 | S&F in repairs PVC bib taps 15mm type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed. |
| 88 | S&F in repairs WHB Brass CP mixer swan neck for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 89 | S&F in repair 125 mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed. |
| 90 | S&F in repair 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed. |
| 91 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as directed. |
| 92 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed. |
| 93 | S & F in repairs Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 94 | S & F in repairs two way Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 95 | S & F in repair Stainless Steel Wall Mount Case with Soap Holder & brush Holder fixed to wall complete all as specified and as directed. |
| 96 | S & F in repairs Hand shower 1.5 m CP Flexible SS Tube , 5 flow Hand Shower , adjustable wall hook , rubbit cleaning system all as specified and directed. |
| 97 | S & F in repairs Flexible waste pipe for wash hand basin fitted to Wash Hand Basin incl all necessary brackets etc all as specifed and directed |
| 98 | S & F in repairs 32/40 mm PVC downpipe for kitchen sink fitted to Kitchen Sink incl all necessary brackets etc all as specifed and directed. |
| 99 | S& F in repairs Flush Pipe of polyethylene of low or high density or PVC , 32 mm dia, for low level cistern complete all as specified and as directed. |
| 100 | S & F in repairs Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Range premium quality all as specifed and directe. |
| 101 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 102 | S&F in repair PVC water tank covers premium quality fitted to tank . Make - Sintex or equivalent water tanks of Cap 500 ltrs to 1000 ltr complete all as specified and directed. |
| 103 | S&F in repair 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia pvc float valve and removing the existing water tank all as specified in SSR Part I complete all as specified and as directed. |
| 104 | S&F in repair 500ltr capacity rotational moulded polyethylene water storages tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia pvc float valve removing the existing water tankall as specified in SSR Part-I complete all as specified and as directed. |
| 105 | Disconnecting existing tanks (exc 500 but n. exc 1000 ltrs capacity), setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks. The complete tank be scrub to remove dirt, sediments, fungus & stains . The vacuumed tank is disinfected with anti-bacterial spray or liquid bleach. Tank is filled with water that is made to run through the taps to disinfect the water pipes , etc. and hoisting if required reconnecting and re-fixing in the same position date of cleaning should be write by erasing the previous date of cleaning with paint and further writing the current date of cleaning. |
| 106 | Disconnecting existing tanks (exc 250 but n. exc 500 ltrs capacity), setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks. The complete tank be scrub to remove dirt, sediments, fungus & stains . The vacuumed tank is disinfected with anti-bacterial spray or liquid bleach. Tank is filled with water that is made to run through the taps to disinfect the water pipes , etc. and hoisting if required reconnecting and re-fixing in the same position incl writing the date of cleaning should be write by erasing the previous date of cleaning with paint and further writing the current date of cleaning. |
| 107 | S&F, in repair brass spindles, heavy duty, for pillar cock, CP stop cock, CP bib cock, concealed stop cock ,wall mixer, sink mixer in any size etc complete all as specified and directed. |
| 108 | S&F in repair 550mmx350mm PVC Cabinet Mirror with shelves of selected quality glass and fixed on walls to wooden plugs with chromium plated brass screws, cup washers complete all specified and directed. |
| 109 | S & F PVC( SWR ) pipes 110mm dia single socketed , in any length with rubber ring joints as rainwater,(eves gutter fitted in roof for collecting of rain water).stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof or floor welding etc complete all as specified and directed. |
| 110 | S & F PVC( SWR ) pipes 75mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed. |
| 111 | S&F in repair PVC (SWR) bends any radius 110mm bore complete all specified and directed. |
| 112 | S&F in repair PVC (SWR) bends with access door any radius 110mm bore complete all specified and directed. |
| 113 | S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm complete all specified and directed. |
| 114 | S&F PVC(SWR) vent cowl 110mm bore complete all specified and directed. |
| 115 | S&F PVC (SWR) bends any radius 75 mm dia complete all specified and directed. |
| 116 | S&F PVC (SWR) bends with access door any radius 75 mm dia complete all specified and directed. |
| 117 | S&F PVC (SWR) junction single (single T) equal or unequal of bore 75mm complete all specified and directed. |
| 118 | S & F in repairs PVC (SWR) Floor trap/Nahani trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed. |
| 119 | S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 75mm complete all specified and directed. |
| 120 | S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all specified and directed. |
| 121 | S&F for PVC waste pipe for urinal/WHB with fitting etc 50 mm dia. 60mm long complete all specified and directed. |
| 122 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debris and rubbish off the premises and stacking serviceable tiles complete all as specified and directed. |
| 123 | M&L for Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 124 | Description all as per ser item No. 123.00 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and as directed. |
| 125 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 126 | Description all as per ser item No. 125.00 abovebut on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 127 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 300x 450x 7 mm/ 300X 600X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 128 | M & L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as subbase to receive tile complete all as specified and directed. |
| 129 | M&L for 16 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window sills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 130 | Excavating in post holes (Or similar) each n exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good complete all as specified and directed. |
| 131 | M&L Cement concrete Type C2 1:3:6 (40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 132 | M & L Steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting,painting etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 133 | M & L for preparation of new steel or iron surface and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed |
| 134 | M&L for PCC 1:2:4 type B0 (using 12.5 mm aggregate) as in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed. |
| 135 | Dismantling old Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 136 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. |
| 137 | S&F Plain, galvanised, mild steel sheeting thickness 0.63mm , in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 138 | S&F in repair door seal bottom brush dust stopper strip aluminium plate with nylon brush for cover the bottom door gaps between 20-25mm including fixing with steel screws etc; complete all as specified and as directed. |
| 139 | S&F in repair plastic water closer seat, white colour, closed pattern with flat or recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for ewc,single piece,wall mounted or any type/any make of wc complete all as specifed and directed. |
| 140 | S&F in repair Gun metal, globe or gate valve with iron wheel head/handle screwed both ends for 20mm bore irone pipe and fixed all as specified and directed. |
| 141 | S&F in repair aluminium alloy anodized, sliding door bolts 300 mm long with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified and as directed. |
| 142 | S&F in repair aluminium anodized barrel tower bolts 150 mm long of extruded section fixed in repairs complete all as directed. |
| 143 | S&F in repair extruded aluminium alloy handles, 150mm long fabricated type, anodized fixed in repairs complete all as specified and as directed. |
| 144 | S&F in repair mild steel cold rolled, medium weight but hinges100mm size complete all as specified directed. |
| 145 | S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) high pressure complete (Epoxy coated) all as specified and as directed. |
| 146 | S&F in repair 25 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) high pressure complete (Epoxy coated) all as specified and as directed. |
| 147 | Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 148 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed |
| 149 | S&F in repair aluminium extruded section body Door closer hydraulically regulated, designation No.2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender