Tender For Repair/Maint /Fitment Of Recds And Other Items For Dg Sets Of Age Es And Age Ws Under Ge(U) Udh Ur.
Tender Value
48 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
6 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/Maint /Fitment Of Recds And Other Items For Dg Sets Of Age Es And Age Ws Under Ge(U) Udh Ur.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Repair/Maint /fitment Of RECDs and other items for DG Sets of AGE ES and AGE WS under GE(U) Udhampur. Contract No: GE/U-108/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Supply Installation testing and commissioning Of retrofit emission control device for diesel generator of any make/vintage /Category.Application :- Reduce particulate matter (PM 2.5), Carbon Monoxide and Hydrocarbons emitted from Diesel Engine of DG sets up to 800 KW as per CPCB-II Norms.Technology/Type :- Diesel oxidation catalyst, Guaranteed specified Particulate matter (PM 2.5) Carbon Monoxide, Hydrocarbon reduction efficiency (Min) 70% for all DG sets.Scope of Installation :-a) Installation of Emission Control Retrofit Device when offered by the vendor is inclusive in the scope of supply and shall be done by the seller. b) Construction of suitable earthing station and necessary connections shall be done by the seller.c) Warranty/Service :- 12 monthsd) Number of preventive maintenance visits offered in a year during warranty period :- 2 visitsBack Pressure due to the Emission Control retrofit device :- Maximum back pressure exerted by the Emission Control retrofit device at max prescribed load by DG OEM(as per the capacity of the DG set). |
| 3 | TEST REPORTSCertification :- The device must be 'Type Approved' in accordance with the Central Pollution Control Board's System and Procedure for Emission Compliance Testing of Retro-fit Emission Control Devices (RECD) for Diesel Power Generating Set Engines, dated 01/02/2022, as well as provide a type testing certificate for all KVA families of required generators.Adhering to this, RECD to be ‘Type Tested’ for an equivalent kVA family as per the System and Procedure from any one of the four Central Pollution Control Board, Govt, of India, recognized/approved test agencies/laboratories as given below: (a) Automotive Research Association of India (ARAI, Pune)(b) International Centre for Automotive Testing (ICAT, Manesar)(c) Indian Institute of Petroleum (IIP, Dehradun)(d) Vehicle Research Development Establishment (VRDE, Ahmednagar): |
| 4 | General Technical Requirments(GTR)/Commissioning:-a) Emission control retrofit device shall be complete with safety precution to ensure no damage should be done to the DG set operations under anycircumstance.The Emission control retrofit device should be closely coupled with the DG exhaust to ensure 100% of the exhaust passes through theEmission control retrofit device.b) Anti vibration mountings shall be provided for complete Emission control retrofit device in case of flaxible coupling with the DG exhaust c) Emission control retrofit device should have protection against under voltage,over voltage,under frequency ,over frequency,lowbattery voltage,over current,earth fault,short circuit ,phase sequence change etcd) The Emission control retrofit device shall be with cirrosion resistive and HR paint.e) Unloading and placement of the Emission control retrofit device at the time of delivery is in the scope of work. f) The contractor shall provide the trail of the Emission control retrofit device at least two hours on site .g) All exhaust piping ,any extra work, distribution board shall be provided by the contractor in the scope of work.(h) Detailed Test report on pre and post implementation of the Retrofit Emission control device (RECD) from NABL Approved Lab.(j) RECD manufacturer/OEM shall be certified from one of five currently CPCB reconginzed/Approved labs applicable to phase-I & phase-II DG sets and the contractor shall submit mandatory 'Type approval' certificate as received by RECD manufacturer/OEM from CPCB recongnized/approved labs before installation of RECD over the DG sets |
| 5 | (k) Contractor shall submit a copy of Memorandum of understanding (MOU) with RECD manufacturer/OEM.(l) Contractor must submit Noise certificate of RECD device from Govt lab only. |
| 6 | (k) Contractor shall submit a copy of Memorandum of understanding (MOU) with RECD manufacturer/OEM.(l) Contractor must submit Noise certificate of RECD device from Govt lab only. |
| 7 | Description all as per ser item No. 1.00 here-in-before but of 600 KVA |
| 8 | Description all as per ser item No. 1.00 here-in-before but of 250KVA |
| 9 | Description all as per ser item No. 1.00 here-in-before but of 82.5KVA |
| 10 | Description all as per ser item No. 1.00 here-in-before but of 75 KVA |
| 11 | Description all as per ser item No. 1.00 here-in-before but of 62.5 KVA |
| 12 | Description all as per ser item No. 1.00 here-in-before but of 30 KVA |
| 13 | Description all as per ser item No. 1.00 here-in-before but of 10 KVA |
| 14 | Description all as per ser item No. 1.00 here-in-before but of 20 KVA Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender